Low FPS on Visiontek TI4200 128

Terrible.One · 15-February-03, 04:20 AM

Hey,
I just got a VisionTek Xtasy GeForce4 Ti 4200 , and I'm getting about 10-25FPS on 1024 x 768 when play UT2k3, and also when i play america's army I only get about 10-20.. I was just wondering if that was normal for the card i just got.

-John

Gamma_Goblin · 15-February-03, 05:01 AM

dude wtf... i have a 64 meg visiontek and i get like 40!

yea there is sumthin wrong w/ ur card... myabe drivers. could be bad card or bad memeory. try overclockin it a bit

brandon

corruptjoker · 15-February-03, 05:05 AM

Did you install any drivers or are you using windows drivers?

Buzz_4_20 · 15-February-03, 05:18 AM

do you have AA or AF inabled?
btw, what's the rest of your system??

Gamma_Goblin · 15-February-03, 05:19 AM

cuz if u r using windows drivers, all tha tit will do is disappoint u.

dl the new drivers

brandon

lcpiper · 15-February-03, 11:29 AM

You will also need to go into your BIOS and make sure your AGP Aperture is set to at least 128MB.

And in your drivers, you might as well turn off V-Sync.

Terrible.One · 15-February-03, 01:35 PM

Quote:


	Originally posted by Buzz_4_20 do you have AA or AF inabled? btw, what's the rest of your system??

I have a
K7S5A Pro mobo
XP 1800+
Xtacy Ti4200
Kingston 512 DDR

And Im using the 40.91 Denotator and I have AA disabled.

-John

15-February-03, 04:20 AM	#1 (permalink)
Terrible.One Apex Techie Wannabe Join Date: Feb 2003 Posts: 2	Low FPS on Visiontek TI4200 128 Hey, I just got a VisionTek Xtasy GeForce4 Ti 4200 , and I'm getting about 10-25FPS on 1024 x 768 when play UT2k3, and also when i play america's army I only get about 10-20.. I was just wondering if that was normal for the card i just got. -John

15-February-03, 05:01 AM	#2 (permalink)
Gamma_Goblin Senor Cisner-Hoes Join Date: Nov 2002 Posts: 1,013	dude wtf... i have a 64 meg visiontek and i get like 40! yea there is sumthin wrong w/ ur card... myabe drivers. could be bad card or bad memeory. try overclockin it a bit brandon __________________

15-February-03, 05:05 AM	#3 (permalink)
corruptjoker Decept-Hoe-Con Join Date: Aug 2002 Posts: 1,752	Did you install any drivers or are you using windows drivers? __________________

15-February-03, 05:18 AM	#4 (permalink)
Buzz_4_20 Apex Elite Tech Join Date: Nov 2002 Location: Presque Isle, ME - go ahead look it up... Posts: 1,209	do you have AA or AF inabled? btw, what's the rest of your system?? __________________

15-February-03, 05:19 AM	#5 (permalink)
Gamma_Goblin Senor Cisner-Hoes Join Date: Nov 2002 Posts: 1,013	cuz if u r using windows drivers, all tha tit will do is disappoint u. dl the new drivers brandon __________________

15-February-03, 11:29 AM	#6 (permalink)
lcpiper H2-Hoe Join Date: Jul 2002 Location: Sierra Vista, AZ. Posts: 3,339	You will also need to go into your BIOS and make sure your AGP Aperture is set to at least 128MB. And in your drivers, you might as well turn off V-Sync. __________________ Life is hard. It's harder if your stupid ! Give them enough rope and they'll hang themselves. Give'em a little more and they'll hang us all !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Visiontek 9600XT	Ward	Video Card OC	3	06-February-06 12:36 PM
FS: VisionTek X800 XT AGP	swu9766	Trading Post	7	16-September-05 06:35 PM
Visiontek repair time?	DrunkPikachu	Anything Goes	4	22-April-03 02:11 AM
visiontek	mirage	Video Cards	16	22-December-02 07:28 PM
Visiontek = Out of buisness	OMFG_dude_WTF	Video Cards	18	21-August-02 12:07 PM