Did a search without any results so here it is! A thread to show off your new / old video cards! I know J-dogg is going to love this one lol!

9800 Pro before using AS5 to install into Vash



I just got an Arctic Silencer for my All-In-Wonder. I never knew they'd fit lol.





My friend's X800Pro... I get to test it out and have fun!!! Wooohooo!!!

Attached Thumbnails

     

   

I have the 9800 Pro 128mb card...........any probs installing that cooler?

My AIW 9800Pro 128MB w/ the zalman heatpipe cooler and ram-sinks, you can also see my 9200 below it. And as you can see, following the directions, the cooler interfers with the mounting bracket for the cpu fan, also by zalman.

Quote: Originally Posted by Highperf15 I have the 9800 Pro 128mb card...........any probs installing that cooler?

Not at all! It took me about 10 minues from cleaning off the AS5, taking off the stock cooler, lapping the silencer, re-applying AS5, tinning, and then screwing on the new cooler mounts. The only tough part was to get the holes aligned right, but that just takes a minute or less to get.

Edit: Nice pics Cyno01

MY voodoo 2 16mb sdr ram! W/ my Modded MOSFET Cooler!





This is the beginign of MY voodoo mod! i replaced the MOFSET HS


The New HSF for the Voodoo, Lapped and ready to go on, once i get the Thermal Glue

Attached Thumbnails

   

Quote: Originally Posted by JessAlba452 Not at all! It took me about 10 minues from cleaning off the AS5, taking off the stock cooler, lapping the silencer, re-applying AS5, tinning, and then screwing on the new cooler mounts. The only tough part was to get the holes aligned right, but that just takes a minute or less to get. Edit: Nice pics Cyno01

Kewl Beans.............

Cyno01...............so would you say that setup is worthy or is there something better?

I came across a box with a few of these inside here at work. It's a Matrox Meteor Pro Revision B. The model is listed as Meteor/PPB. I guess they were video capture cards or something like that. Just an unusual card.

Attached Thumbnails

 

Interesting find BA, have you tested them out to see if they work?

Here are mine. A pic of my 9800 pro taking a bath. My 6800 with a maze4 gpu block and copper heatsinks, and the card during the surgery...

Attached Thumbnails

     

Nice pics SPECIALBLEND! LoL I have to say your avatar made me laugh though, my friend asked if my bottle was filled with Koolaid too.

Quote: Originally Posted by BigAkita I came across a box with a few of these inside here at work. It's a Matrox Meteor Pro Revision B. The model is listed as Meteor/PPB. I guess they were video capture cards or something like that. Just an unusual card.

hey BA that would be a good card to PIMP up. maybe change the MOFSET HS to a bigger one and stick a p1 or p2 hsf on that! that would be pretty cool!

Hey Jess, what kind of ram sinks do you have on the 9800 AIW?

Btw, I used OCZ bga sinks, along with the same Arctic Silencer for my 9600 AIW Pro

Attached Thumbnails

   

I've only got ram sinks on the 9800 Pro since I don't OC the AIW...well I don't much anyways. LoL

They're Vantec copper ram sinks

Quote: Originally Posted by JessAlba452 Interesting find BA, have you tested them out to see if they work?

No, but I'm pretty sure they do. Based upon the other stuff that was in the box, they were part of a system upgrade for 4 computers.

Powercolor Radeon 9800SE, softmodded to Pro, with Iceberq 4 and Vantec ramsinks. Taken through my window, so sorry about the glare.

ATi Radeon 7200 64MB DDR.

Attached Thumbnails

     

Nice pics Spectrum, also I noticed your case is really clean on the inside!

The pride and joy of my collection.....

Voodoo 5 5500 AGP 64mb heatsink modded



here is my collection, more cards were added since this was taken but they are just a couple different Voodoo 3 series, nothing to really brag about. Also recently picked up a Voodoo 4 4500 AGP 32mb. Still looking for a Voodoo Rush and Voodoo 3000 PCI, Compaq 3500, Voodoo 4 and 5 PCI and prototype cards as well.

I also recently got my first Quantum 3D card thanks to fu3lman, it was a Raven (Banshee chipset) 16mb AGP, nothing special but still a rare bird being a Quantum 3D card



Sometime this week I'll try to get an updated picture of my collection. The 3500TV is in my master server and the modded Voodoo 3000 AGP is in another system.

I love the clenliness of your case Spec, it looks to be defined by terms of what I should call; quite pristene.
I haven't got around to pics 4 a bit, i'm working on it tho, check back on my post soon.





Sorry, as you see in pic, I haven't dusted in two weeks!!! -With the kind of CFM *The Great Chai* ( *my rig's name, see sig) is cranking out, it gets very dusty very quickly. Pic Legend: 1) 9800SE flashed to Sapphire ( non atlantis) 256-bit 9800PRO. 2) Pic through the casetop exaust. 3) 5200fx ( non-ultra) -my first AGP videocard.. Strange timing!


<- The front bezel intake I just installed should also be taken into consideration when thinking about dust/ cooling.

Spectrum your Attatchment isn't showing up for me.

Edit: Now it's gone? Weirddd

im surprised j didnt catch this....that isnt a voodoo 2 O.o looks much more like a banshee or voodoo 3