ATI 9600PRO No Video

rotory · 29-October-03, 04:48 PM

Recently bought a 9600 pro 256MB

Was working fine untill one day computer shut off.

Now has NO video signal at all.

Tried resetting CMOS, removing battery ect.

Tired this card in another computer, no problems, tried another card in this computer, no problem,

Swapped out RAM, same thing.

Totally clueless but its apparenet all the components are properly functioning.

Ideas?

Dan

P4 2.4Ghz, Biostar P4VTB 800Mhz FSB
1 GB Ram PC3200
120 GB Hard Drive
ATI Radeon 9600 Pro 256MB AGP

mot19 · 29-October-03, 07:13 PM

.....wow that is wier. Use the cmos reset jumper put it on then take out the battery then unplug it leave it sit for 30 minutes then plug them all back in. That should do the trick.

rotory · 29-October-03, 07:56 PM

tried it last night, no good

Dan

Dimazz · 29-October-03, 08:43 PM

my guess would be try a diffrent moniter

neotheducky · 29-October-03, 09:10 PM

Do you have a powersurge protector on the computer? You might have blown out your AGP slot or your motherboard. You might be out of luck there

29-October-03, 04:48 PM		#1 (permalink)
rotory Apex Techie Wannabe	ATI 9600PRO No Video Recently bought a 9600 pro 256MB Was working fine untill one day computer shut off. Now has NO video signal at all. Tried resetting CMOS, removing battery ect. Tired this card in another computer, no problems, tried another card in this computer, no problem, Swapped out RAM, same thing. Totally clueless but its apparenet all the components are properly functioning. Ideas? Dan P4 2.4Ghz, Biostar P4VTB 800Mhz FSB 1 GB Ram PC3200 120 GB Hard Drive ATI Radeon 9600 Pro 256MB AGP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
9600Pro -> X800Pro upgrade	Gyoza	Video Cards	6	05-October-05 09:09 AM
9600PRO AIW won't record from VCR. says "can't record broadcast video"	AMD Daddy	Video Cards	14	03-April-05 01:56 AM
Ati 9600PRO overclocking	Qwyjiboe	Video Cards	4	22-February-04 05:34 PM
Radeon 9600PRO ? HELP ME	sweet91transam	Video Cards	10	31-December-03 07:23 PM
More 9600Pro !	TYCOON	Video Cards	5	19-October-03 09:43 AM

29-October-03, 07:13 PM		#2 (permalink)
mot19 Apex Tech God	.....wow that is wier. Use the cmos reset jumper put it on then take out the battery then unplug it leave it sit for 30 minutes then plug them all back in. That should do the trick.

29-October-03, 07:56 PM		#3 (permalink)
rotory Apex Techie Wannabe	tried it last night, no good Dan

29-October-03, 08:43 PM		#4 (permalink)
Dimazz Sk8-Hoe-r	my guess would be try a diffrent moniter

29-October-03, 09:10 PM		#5 (permalink)
neotheducky Rubber Duck-Hoe	Do you have a powersurge protector on the computer? You might have blown out your AGP slot or your motherboard. You might be out of luck there