Gizmo

The H20-120 series liquid cooling kits are configured for performance oriented users and overclockers who wish to maintain a quiet working/playing environment. This series of kits received more industry awards than any other Swiftech product. It is therefore with great pride that Swiftech now introduces the H20-120 PREMIUM edition.

The H20-120 "Premium" CPU Liquid Cooling kit takes the H20-120 convenience and performance features to yet another level thanks to the inclusion of the new flagship water block, the Apogee, as well as the now classic MCB120 "Radbox". Performance improvement from the Apogee water-block alone ranges from 2.4 to 3°C.

Extreme Performance Features:

The new flagship APOGEE™ water-block features a quantum leap in performance compared to the MCW6000 series of water-blocks. Its low flow restriction characteristics also allow daisy-chaining of multiple water-blocks, while retaining rock-solid performance.

The high-pressure MCP350™ 12 Volt DC industrial pump provides ample headroom to daisy-chain additional water-blocks. For instance, the H20-120 Premium will easily support a dual core CPU (AMD® Athlon X2 for example) as well as (2) high-end VGA cards such as nVidia® GeForce 7800 series. 3/8" (ID) tubing offers low restriction with reasonable outside bulk (1/2" OD).

High thermal dissipation is achieved with a single MCR120-QP 120 mm copper fins radiator featuring a 120x25mm fan selected for low to moderate noise (34dBA) and high back pressure. The MCB120 "Radbox" optimizes cooling by using fresh air from outside the computer, without adding any thermal load to other components.


Silent Computing Features:

Adjustable fan speed: fan speed can be adjusted thanks to the included 12v to 7v and 12v to 5v fan connector adapters, allowing users to reduce acoustic noise as follows: at 7v, whisper quiet operations of 24 dBA, and at 5v a barely audible 19 dBA rating.

Quiet pump operations: 24 to 26 dB(A) thanks to the brushless motor.

The MCR120-QP radiator fin density has been optimized to reduce air noise and operate at high efficiency with low-flow fans. Even at the lowest fan speed settings, the H20-120 Premium kit delivers low temperatures while allowing substantial overclocks.

Convenience & Reliability Features:

The 12 Volt DC pump plugs directly into computer power supply, features an RPM sensor, and is fully integrated with the MCRES-1000 reservoir in a 5 1/4" CD-ROM tray.High-reliability, no-maintenance MCP350 industrial pump is rated at 50,000 hour MTBF(Mean Time Between Failures) equivalent to 5 year lifetime.120mm slim form factor radiator fits into most chassis equipped with at least one 120mm opening for fan intake or exhaust, and can also be installed externally to the back of any chassis featuring at least one 60, 80 or 92mm exhaust fan, by using our patent pending MCB120 "Radbox" included with the kit.The MCB-120 "Radbox" provides a bolt-on mechanism to "hang" the radiator at the back of the case with no case modificationsSmartcoils™ completely eliminate flattening of the tubes over time, and enable users to bend soft vinyl tubing at extremely sharp radii without kinking.


FAQ: What CPU temperature can I expect in my own system?

In order to project what your CPU temperature will be, you need to know the following:
Power rating in Watts of your CPU.Ambient Temperature inside the computer.

For example, if your CPU is rated by the manufacturer at 100 Watts, and the temperature measured inside your computer (close to the fans inlet), is 25°C, then you multiply 100 Watts by our C/W rating of 0.134 (at 12 Volt) = 13.4°C, to which you add the temperature inside the computer of 25°C, = a CPU temperature of 38.4°C at full load.


Processor and Motherboard compatibility:

The H20-120 Premium kit is is essentially meant as a universal product. It ships with all the necessary hardware for the following processor (classified by the type of sockets that they use):
Socket 478 (Intel® Pentium® 4)Socket 775 (Pentium® 4 "Prescott", Pentium® D)Socket 603/604 (Intel® Xeon™ - 400 and 533 FSB)Socket 604 Intel® Xeon™ "Nocona" 800 Mhz FSB - see note 1 belowSocket 462 (AMD® Athlon®, Duron®, MP, XP) - see note 2 belowSocket 754, 939, 940 (AMD® 64 bit processors).

Note 1: Dual processor users: Since the H20-120 Premium kit is provided with one water-block only, you will need to procure another Apogee water-block for your second processor. The "Nocona" hardware is not included with the Apogee water-block when sold separately, and it should also be procured separately under part number: AP-NC604

Note 2: AMD® socket 462 (socket A). The Apogee can be used exclusively with motherboards featuring the 4 mounting holes around the socket.

Removal of the motherboard is necessary to install the mounting posts in all cases, except with AMD® Athlon™ 64 and Opteron™ (socket 754, 939 and 940).

H20-120-PREMIUM:

Complete CPU liquid kit for Intel socket 478 (Intel® Pentium® 4), socket 775 (Pentium® 4 "Prescott"), socket 603-604 (Intel® Xeon™ and "Nocona" class processors), socket 462 (AMD® Athlon®, Duron®, XP, MP),socket 754, 939, 940 (AMD® 64 bit processors).

Installation Guides:

Download English Guide (PDF)

Download French Guide (PDF)

Download German Guide (PDF)http://www.frozencpu.com/ex-wat-79.html?id=CpNYRKmK