Gizmo

The TJ06 H2O-Tek case has the water cooling system pre-installed - all you have to do is install your computer. The H2O-Tek system makes creation of a top end water cooling system child's play!

The XX-Flow water block comes with mounting hardware for Socket 478 / 754 / 939 / 940. (Intel Pentium 4 and AMD Athlon 64 / FX)

The 12V HPPS Pump runs off your computer's power supply instead of having high-voltage cables running through your system.

Overview:

The H2O-Tek case is ready run with almost no downtime. Everything is pre-installed, so the user only has to install their computer components - like a normal computer case.

High-end case design - uses the high-quality SilverStone TJ-06 caseWater-Cooling - installed and ready to useHPPS 12V Pump uses standard computer power supplyAlmost noiseless operation with maximum cooling performanceTool-less case design13 drive bays!High-end water cooling with dual fan radiator - more than sufficient for any top end system!Top-of-the-line XX-Flow CPU Water BlockMounting brackets for Pentium 4 Socket 478 and AMD Athlon 64 / FX Socket 754 / 939 / 940Designed to provide aircirculation for motherboard as wellAssembled in GermanyMore than $50 savings than components purchased separately

The Case:

Silverstone has married good looks, functional design and great cooling to make one of the best cases for your computer. Solid aluminum front lends a touch of nobility to the case design and the interior helps installation with screw-less assembly. In addition, the 13 drive bays provides enough room for almost any application.

For even more convenience the front bezel has Audio, USB and Fire Wire on hand.

System Air Flow:

The pump, motherboard and the case ambient temperature are controlled by efficient air flow design. Air circulation is provided by careful placement of radiator exhausts and case fans. The case is able to keep the temperature down without much noise - even with the latest computer hardware!

Water Cooling:

The installed Innovatek cooling system is designed for the latest and greatest CPUs and can even handle heat generators like dual processor systems. With small changes, the system can be upgraded to support Video Card coolers, Chipset coolers, more CPU coolers, Hard Disk Coolers and more!

Designed to be efficient and problem free, this system assures that you will have top-notch performance.

Case Specifications:

In the TJ-06 the ATX motherboard is flipped upside down to provide the best cooling possible. This vastly simplifies wiring and installation while improving air flow and usability. With the hard disk drives pushed to the top and rear of the case, the intake air isn't immediately heated up.

Material:Solid Aluminum Bezel (~10 mm thick)SECC Steel Housing (vibration resistant)Motherboards:Micro ATXATXExtended ATXExternal Drive Bays:(5) 5.25" Bays(2) 3.5" BaysInternal Drive Bays:(6) 3.5" BaysCooling System:Innovatek High Performance Dual Rad Water Cooling SystemSide Panel Mod:Dual Radiator installed w/ Laser cut radiator grillExpansion Slots:7Front Ports:(4) USB 2.0(1) FireWire (IEEE 1394)(2) Audio portsWeight:~14kg (with water cooling system)Dimensions (WxHxD):205mm x 566mm x 474mm

Water Cooling System Specificatons:

The H2O-Tek case features exclusively Innovatek's high-end components. By using the HPPS 12V pump, powering the pump isn't a problem because it doesn't need any current from outside of the case - it runs on your stock power supply! Innovatek has also decoupled the pump from the rest of the system by way of rubber vibration dampeners. This and the use of efficent, high-quality exhaust fans, the system runs quietly and reliably.

Pre-installed Water Cooling SystemInnovatek Dual Radiator with 120mm high quality fansHPPS 12V Pump with special decoupling systemAGB-O-Matic Header Tank (Blue)XX-Flow CPU Water Block (Blue)Pentium 4 (478) and AMD Athlon 65/FX (754/939/940) mounting bracketsThermal CompoundTubing connections7V adapter (for exhaust connection)4-pin exhaust adapterATX jump-start plugExtra tubing1 Litre pre-mixed Innovatek Protect IPExtra 80mm FanOperating Instructions

Warning: Use of fluids other than the Innovatek Protect family is not recommended. Innovatek will not RMA defective products that have used alternative fluids, including UV Dyes. Do not use alcohol based cleaners on innovatek products.

Did you know?
The innovatek Protect Products are the only licensed corrosion protection fluids in the PC-field that are officially approved by EHEIM for their pumps. Why take risks? Be save and trust the specialists!http://www.frozencpu.com/cas-311.html?id=sPSinK9H