Gizmo

The 775 mounting hardware is designed for all Intel® Pentium 4 processors that use the 775 Socket. (e.g. Pentium 4 Extreme Edition, Pentium 4 6xx, Pentium 4 5xx, Celeron D, et cetera.)

All Innovatek holding and attachment systems for CPU Water Cooling are characterised by simple assembly and absolutely safe design. Since the retaining system is a very important component in a cooling system - and also has a strong influence on the cooling performance - all of the mounting brackets were developed by Innovatek particularly for these requirements.

Features:Simplest InstallationSecure and Optimal Attachment100% contact pressure according to standards set by CPU ManufacturerLong-term stabilityReliable protection of your CPU from damageProfessional designed from original Intel® specifications

Tip:

With socket 775 CPUs an absolutely correct and accurate assembly of the water block is necessary according to Intel's standards, since otherwise the socket or the CPU could be damaged. A mounting assembly with adjustable contact pressure (e.g. with screws) is completely unsuitable.
The Innovatek retaining systems apply only the necessary contact pressure completely automaticly. All that has to be done is a lever must be pushed down!

High Compatibility:

All Innovatek CPU blocks support every CPU available, only the retaining system needs to be changed. This means a great cost savings for users who like to have the latest cpu technology. They can update the motherboard but don't have to change their cpu cooling system.

Socket 775:

The socket 775 retaining system for Intel® Pentium 4 processors consists of glass-fiber reinforced specialized plastic and designed to surround the water block completely to provide high reliability and the manufacturer specific contact pressure on the CPU.

Installation:

The retaining system is very easy to use and can be installed in seconds!

The water block is placed on the CPU (don't forget your thermal compound) and then fastened with the retaining system. The retaining system locks onto the motherboard by simply pressing down on the special attachment rivets. Once all four rivets are locked, the clamping lever is pulled into its locking position and the CPU is installed!

http://www.frozencpu.com/ex-blc-162.html?id=WNKarZIZ