Gizmo

This Block Fits 1/4", 3/8" and 1/2" Tubing!
Wintsch Labs designed the Artic Spider with compatibility in mind, so the block uses standard bay reservoir barbs! The Arctic Spider comes with 1/2" ID Bay Reservoir Outlet Fittings professionally installed. The barbs can be swapped out for 3/8" ID Bay Reservoir Outlet Fittings, or 1/4" ID Bay Reservoir Outlet Fittings instead. These should be purchased seperately.

Also Note: The 437Watt Thermoelectric Module (Peltier Device) can be swapped out for lower powered versions.

Download Installation Instructions Here

The Arctic Spider sets a new standard for GPU cooling. Wintsch Labs has designed this product with the extreme overclocker in mind. Made for the GeForce 6800 graphics cards, the unit utilizes an amazingly powerful 437watt Qmax peltier device that is capable of delivering load temperatures below 0 degrees celsius. The Arctic Spider's 62mm 437watt Qmax TEC unit bests the competiors' standard 50mm modules by over 200 Watts!

The larger footprint allows for greater heat pumping capability and lower temperatures during idle and load conditions. Specifically designed to lower thermal resistance while increasing thermal conductivity, this unit has lower hot and cold plates made of C110 copper. The housing is made of 6061 aluminum and tapped with two 3/8 NPT inlets/outlets creating a balanced distribution of liquid onto the hot plate.

Fitting size: 1/2" or 3/8" or 1/4"

Specifications:Type:T(H) = 50°Calpha:0.0826 V/Krho:0.815 Ohmgamma:3.47 W/KQmax:437.3 WI(Qmax):32.8 AUmax:26.7 VdTmax:74.5 KI(dTmax):25.2 AUmax:26.7 V

The TEC unit can be powered by a stand-alone 24volt - 25amp 600watt power supply or by connecting two Meanwell S-320-12 power supplies in series.

http://www.frozencpu.com/ex-blc-161.html?id=e39dIwwj