This Block Fits 1/4", 3/8" and 1/2" Tubing!
Wintsch Labs designed the Artic Web with compatibility in mind, so the block uses standard bay reservoir barbs! The Arctic Web comes with 1/2" ID Bay Reservoir Outlet Fittings professionally installed. The barbs can be swapped out for 3/8" ID Bay Reservoir Outlet Fittings, or 1/4" ID Bay Reservoir Outlet Fittings instead. These should be purchased seperately.

Download Installation Instructions Here

The Arctic Web is the second generation Thermoelectric Cooling Assembly from Wintsch Labs. Now featuring improved cooling and compatibility with Intel Pentium 4 Socket 478, Socket 775 and AMD Athlon 64. The unit utilizes an amazingly powerful 437watt Qmax peltier device that is capable of delivering load temperatures below 0 degrees celsius. The Arctic Web's 62mm 437watt Qmax TEC unit bests the competiors' standard 50mm modules by over 200 Watts!

The larger footprint allows for greater heat pumping capability and lower temperatures during idle and load conditions. Specifically designed to lower thermal resistance while increasing thermal conductivity, this unit has lower hot and cold plates made of C110 copper. The housing is made of 6061 aluminum and tapped with four 3/8 NPT inlets/outlets creating a balanced distribution of liquid onto the hot plate.

Dimensions: 3.5" x 3" x 1.75"

Fitting size: 1/2" or 3/8" or 1/4"

Specifications:Type:T(H) = 50°Calpha:0.0826 V/Krho:0.815 Ohmgamma:3.47 W/KQmax:437.3 WI(Qmax):32.8 AUmax:26.7 VdTmax:74.5 KI(dTmax):25.2 AUmax:26.7 V

Available in Intel socket 478, AMD Athlon 64 & Opteron.

Overall dimensions are designed to conform with Intel's keepout region specifications.

The TEC unit can be powered by a stand-alone 24volt - 25amp 600watt power supply or by connecting two Meanwell S-320-12 power supplies in series.

Reviews:

Overclock.net09-19-04 Please Note: Wintsch Labs has addressed all the concerns in the review by ammending the product installation components.

http://www.frozencpu.com/ex-blc-134.html?id=iok6mKYK