The H20-120-T™ series of thermoelectric liquid cooling kits are designed for extreme cooling applications where sub-ambient processor temperatures are desired.

While this kit solution is by no means universally compatible with all computer cases, Swifttech's design choices have been made to allow installation in the largest possible number of chassis with a minimum of modifications. Ideal chassis in this respect are those featuring a 120mm fan intake at the front of the case. The kits are also meant to include absolutely everything that is needed to perform a complete thermoelectric installation with proper components insulation.

Performance features and benefits:Extreme performance MCW5002-T™ series water-blocks with 226 Watts thermoelectric module for sub-ambient processor temperatures: up to 50°C drop in processor operating temperature.Dissipation of the thermal load is achieved with two MCR120-FB 120 mm copper fins radiators, featuring a 120x25mm fan each, selected for moderate noise output (34dBA each, 37 dBA total).Extreme performance MCP650™ 12 Volts DC industrial pump.1/2" ID tubing for maximum flow rate inside the circuit.
Convenience & reliability features:Versatility: can be used with a large number of cases with few and simple case modifications. Two 120mm radiators are provided: one complete radiator fan assembly with the MCB120 "Radbox" is a "bolt-on" item meant to be installed externally to the back of the chassis, and one 120mm radiator /fan combo is meant to be installed internally. The second radiator is typically instaled at the front of the chassis instead of a 120mm intake fan. Given the ease of use and quasi universal compatibility of our "Radbox" assembly, it is felt that installation of a second 120mm radiator is significantly easier than finding room for one dual 120mm radiator.More economical and easier to implement than vapor compression systems.High-reliability with Solid state thermoelectric modules (50,000 hours MTBF)High-reliability and no-maintenance MCP650 industrial pump features quiet operations thanks to brushless motor, and is rated at 50,000 hour MTBF(Mean Time Between Failures) equivalent to 5 year lifetimeConvenience: 12 Volt DC pump plugs directly into computer power supplyConvenience: MCRES-525™ 5 1/4" Drive bay reservoir allows a quick and easy procedure for filling-up the system.The S320-12 auxiliary 25 amps power-supply is provided with the kit, and includes a relay switch and harness to couple the auxiliary power supply to the main power supply.Convenience: all Insulation products such as dielectric grease and conformal coating are included with the kit
Four kit models support the most popular microprocessors:Intel® Pentium® 4 (lga 775)Intel® Pentium® 4 (socket 478)AMD® Athlon® 64 (socket 754, 939,940)AMD® Athlon® XP, Sempron socket 462)

What can be expected in terms of overclocking ?

The integrated circuit industry rule of thumb states that a chip will gain an average of 2 to 3% in operating frequency for every 10°C drop in operating temperature. The chart below is helpful in estimating what the processor temperature will be after installation of the kit, and then project the microprocessor frequency gain using this rule of thumb.

It is estimated that coolant temperature will be maintained at approximately 10C above ambient temperature in this kit configuration.

Kit H20-120-775T™ for Intel® Pentium® 4 (socket LGA775) Includes:(1) MCW5002-775T Thermoelectric waterblock(1) MCR120-FBRB Radiator/fan and "Radbox" assembly(1) MCR120-FB Radiator/fan assembly(1) MCP650™ 12 Volts DC industrial pump, with pre-installed tubing(1) MCRES-525™ 5 1/4" drive bay reservoir & fittings(1) S320-12 Kit auxiliary power supply6 feet 1/2" ID vinyl tubing, and tube inserts2 Oz bottle HydrX™ extreme duty coolant(1) Céramique™ thermal compound(1) Luberex dielectric grease(1) Conformal coating spray

http://www.frozencpu.com/ex-wat-57.html?id=NF4Vjwiv