Gizmo

Please Note:
The Dominator Pro comes with 1/2" ID Bay Reservoir Outlet Fittings installed. The barbs can be swapped out for 3/8" ID Bay Reservoir Outlet Fittings instead.

Download Instructions Here

The Dominator Pro from the bright minds at Wintsch Labs is the first water cooled thermal electric unit to utilize a 437watt Qmax peltier device. Capable of delivering load temperatures below 0 degrees celsius, the Dominator Pro's 62mm 437watt Qmax TEC unit bests the competiors' standard 50mm modules. This larger footprint allows for greater heat pumping capability and lower temperatures during idle and load conditions. Specifically designed to lower thermal resistance while increasing thermal conductivity, this unit has lower hot and cold plates made of C110 copper. The housing is made of 6061 aluminum and tapped with four 3/8 NPT inlets/outlets creating a balanced distribution of liquid onto the hot plate.

Dimensions: 3.5" x 3" x 1.75"

Fitting size: 1/2" or 3/8"

Specifications:Type:T(H) = 50°Calpha:0.0826 V/Krho:0.815 Ohmgamma:3.47 W/KQmax:437.3 WI(Qmax):32.8 AUmax:26.7 VdTmax:74.5 KI(dTmax):25.2 AUmax:26.7 V
Available in Intel socket 478, AMD Athlon 64 & Opteron.

Overall dimensions are designed to conform with Intel's keepout region specifications.

The TEC unit can be powered by a stand-alone 24volt - 25amp 600watt power supply or by connecting two Meanwell S-320-12 power supplies in series.

Reviews:

Overclock.net09-19-04 Please Note: Wintsch Labs has addressed all the concerns in the review by ammending the product installation components.

http://www.frozencpu.com/cgi-bin/fro...ml?id=PnPGv9I6