I am hoping to make a move to conroe so I need to fund a new mobo and CPU......

To do so and to cover depreciation I have a few items up for sale....

I prefer to sell the MOBO and CPU together....This combo has hit 4.3 Ghz and ran benchmarks at said speed with good cooling and memory. SCREEN SHOT BELOW!
SHE runs all day at 4ghz with a good HSF.

I will list prices and specs and pics are attached...The whole combo would cost you 685.00 new....mine is $135 bucks cheaper.....Enough to furnish a basic PCIE video card....
If you have ever wanted to get into dual core intel or Crossfire heres your chance!

This setup has been babbied and well taken care off....
It will look brand new when you recieve it...Not worn out and used to hell...lol
If you have any questions you can email me at...
bsnider (AT) woh.rr.com
or PM me here...
My Home Phone is 419 516 4102 for questions.

Actuall Hardware pics can be found in this project thread....
http://forums.pcapex.com/project_wor...crossfire.html

You get all manuals...software....cables etc...everything that comes in the factory box...Including the factory box...lol




Gigabyte GA-G1975X Intel 975X Socket 775 Motherboard
GIGABYTE
$125.00 Shipped CONUS


Processor LGA775 Intel® Pentium® D / Pentium® 4 processor
Supports 1066/800/533MHz FSB
Chipset Northbridge: Intel® 975X Express Chipset
Southbridge: Intel®ICH7R
T.I IEEE 1394 Controller
Gigabit Ethernet Controller
Creative Sound Blaster Live 24-bit Audio controller
ITE 8211controller
Memory Type: Dual channel DDR2 533/667-240pin ECC
Max capacity: Up to 8GB by 4 DIMM slots
Internal I/O Connectors 4 X Serial ATA 3Gb/s connectors
1x UDMA ATA 100 / 66/ 33 connector ( ICH7R )
1x UDMA ATA 133/ 100/ 66/ 33 connector (ITE IT8211F)
1 X FDD connector
1 X IEEE 1394 connector (support 2 ports)
3 X USB 2.0/1.1 connectors (support 6 ports)
1 X audio pin header (support 7.1-ch)
1 X S/PDIF In/Out pin header
3 X Cooling fan pin headers
1 X COMA connector
Expansion Slots 2 x PCI Express X16 slot
2 x PCI Express X4 slots
2 x PCI slots
Rear Panel I/O 2 X USB 2.0/1.1 ports
1 X RJ45 port
PS/2 Keyboard/Mouse
Audio (1x Line-in/ 1x Line-out/ 1x Mic) connector
Form Factor ATX form factor
305 x 244mm
H/W Monitoring System health status auto-detect and report by BIOS
Hardware detecting and reporting for case open, CPU voltage, and fan speed BIOS
2 x 4Mb flash ROM, Award BIOS
Other Features Multi-GPU support
C.R.S. (CMOS Reload Switch)
Norton Internet Security
Xpress™ Installation
Xpress™ Recovery 2
C.I.A. 2 (CPU Intelligent Accelerator 2)
M.I.B. 2 (Memory Intelligent Booster 2)
EasyTune™ 5
Download Center




Intel Pentium D 930 Presler 3.0GHz LGA 775 Dual Core Processor Model BX80553930 - Retail


64 bit Support: Yes
FSB: 800MHz
Hyper-Threading Support: No
L1 Cache: 24KB+32KB
L2 Cache: 2 x 2MB
Multi-Core: Dual-Core
Process Type: 65 nm
Series: Pentium D
Virtualization Technology Support: Yes
Vista Ready: Yes
$130 Dollars Shipped. In factory box with heatsink and accessories.

OCZ Gold Series 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400) Dual Channel Kit Desktop Memory Model OCZ26672048ELDCGE-K - Retail


Buffered/Registered: Unbuffered
Cas Latency: 4
ECC: No
Features: Gold Mirrored Copper Heatspreader
Heat Spreader: Yes
Manufacturer Warranty: Lifetime
Timing: 4-4-4-12
Voltage: 1.9V
Model #: OCZ26672048ELDCGE-K
$170 Shipped CONUS

FSP Group (Fortron Source) FX700-GLN ATX12V/ EPS12V 700W Quad. SLi Power Supply – Retail


$125.00 Shipped CONUS.

$550.00 for all…

If you took the time to read this...help a brother out and bump the thread...thanks
Digi

Attached Thumbnails

 

Bump, Because I read the thread.

bump because it just increased my post count by 1

Heh.......I didn't see those Crossfire cards in there.......must be keeping those for the next setup?

Damit!!!! i wish i had some Xtra money for this DEAL

I heard about your cleaning of sold parts and the OCD invovled, bump for the deal, but im stuck in a hole after my last hardware purchase.

Quote: Originally Posted by s1ugh34d I heard about your cleaning of sold parts and the OCD invovled, bump for the deal, but im stuck in a hole after my last hardware purchase.

Yes I am obsessive compulsive...I believe they should look BRAND new to whoever buys them.
I cleaned your board before it was shipped to you...and it looked better then most used boards did it not?

bump because i am aggrivated because i cant afford this right now, and that makes me cry

Quote: Originally Posted by Digital-World Yes I am obsessive compulsive...I believe they should look BRAND new to whoever buys them. I cleaned your board before it was shipped to you...and it looked better then most used boards did it not?

Why didnt you clean my phase then noob? And gass it and fix it while you were at it. Just messin dood. Bump for you good luck with the sale.

Quote: Originally Posted by Digital-World Yes I am obsessive compulsive...I believe they should look BRAND new to whoever buys them. I cleaned your board before it was shipped to you...and it looked better then most used boards did it not?

Most cwrtainly did, i appreciate it too, but i keep my boards clean im kinda OCD about theonesrunning. anyhow good deal and he means clean trust me.

Quote: Originally Posted by Cpt.Planet Why didnt you clean my phase then noob? And gass it and fix it while you were at it. Just messin dood. Bump for you good luck with the sale.

no0b? ME? lol
that phase was for parts...I tossed that piece of junk in a box and shipped it as is...lol

Now when Slay got his ....IT WAS CLEAN....
lol

Guess I am going to have to toss this on EBAY.....seems the crowd here wants me to sell the whole thing for like 25 bucks...lol
Judging from the PM's we all broke at the same time.lol

Digi

Bump for new price.....$100 less then before...

Wow I want that motherboard....I hope you still have it on the 8th(payday) =O

edit - Also, would you consider selling a single stick of that ram?

Sooo many deals and I am Sooo BROKE! Until I get my Sick Buy-Back Check

BUMP!

Bump for a good guy ....

Digi, I'm possibly interested in the PSU. PM to ya...