FS: Custom 80mm led fans, 92mm fan, Modder's Mesh

m3_tw0 · 11-July-06, 04:28 PM

EVERYTHING HAS BEEN SOLD THANKS!

80mm fans

All three of the 80 mm fans are clear with orange leds that I installed myself in all 4 corners. I soldered and glued everything together so thats while it looks kind of ghetto at all the connection points. Two of the fans are connected together which I was going to use for a front fan setup and the other is a single which looks the same way. They all have 3 pin connectors on them. They were only tested and have less then an hour of run time on them. The single fan has orange sleeving on it.

Specs:

Air Flow 32.5CFM
Fan Speed 2500 RPM
Noise Level 28 db

I want to sell them all together so I'm asking $13 shipped.

92mm Fan

The 92mm fan is orange with no leds. I bought it like this and never used it in my mod. It has a three pin connector with ornage sleeving on it. Never used it.

Specs:

Air Flow 48CFM
Fan Speed 2800 RPM
Noise Level 34.5 db

Asking $6 shipped or $17 shipped with all the other fans.

Modder's Mesh

I have 2 sheets of round hole mesh. One is unused and measures at 12in x 12in. The other piece with a corner missing measures at 12in x 8in at its biggest part. The chunk that is missing is about 3in x 4in.

I am asking $15 shipped.

PM me or email me with any questions.

Irule at cox.net

m3_tw0 · 13-July-06, 04:00 PM

bump to the top

Sn0wMan · 13-July-06, 04:07 PM

If I could get the mesh for $10 shipped then we might have something. I do need a new fan but I need UV instead of orange...

m3_tw0 · 14-July-06, 03:06 AM

Its gonna cost me around $5 to ship the mesh so $10 isnt going to cover it and paypal fees.

ratchetfps · 14-July-06, 08:06 PM

I'll take the mesh =) PM sent.

m3_tw0 · 19-July-06, 07:24 PM

Everything Has Been Sold Thanks!

11-July-06, 04:28 PM	#1 (permalink)
m3_tw0 Apex Tech Fanatic Supreme Join Date: Nov 2002 Location: Az Posts: 773	FS: Custom 80mm led fans, 92mm fan, Modder's Mesh EVERYTHING HAS BEEN SOLD THANKS! 80mm fans All three of the 80 mm fans are clear with orange leds that I installed myself in all 4 corners. I soldered and glued everything together so thats while it looks kind of ghetto at all the connection points. Two of the fans are connected together which I was going to use for a front fan setup and the other is a single which looks the same way. They all have 3 pin connectors on them. They were only tested and have less then an hour of run time on them. The single fan has orange sleeving on it. Specs: Air Flow 32.5CFM Fan Speed 2500 RPM Noise Level 28 db I want to sell them all together so I'm asking $13 shipped. 92mm Fan The 92mm fan is orange with no leds. I bought it like this and never used it in my mod. It has a three pin connector with ornage sleeving on it. Never used it. Specs: Air Flow 48CFM Fan Speed 2800 RPM Noise Level 34.5 db Asking $6 shipped or $17 shipped with all the other fans. Modder's Mesh I have 2 sheets of round hole mesh. One is unused and measures at 12in x 12in. The other piece with a corner missing measures at 12in x 8in at its biggest part. The chunk that is missing is about 3in x 4in. I am asking $15 shipped. PM me or email me with any questions. Irule at cox.net Attached Thumbnails Last edited by m3_tw0; 19-July-06 at 07:24 PM.

13-July-06, 04:00 PM	#2 (permalink)
m3_tw0 Apex Tech Fanatic Supreme Join Date: Nov 2002 Location: Az Posts: 773	Re: FS: Custom 80mm led fans, 92mm fan, Modder's Mesh bump to the top

13-July-06, 04:07 PM	#3 (permalink)
Sn0wMan Apex Tech Demi-God Join Date: Aug 2005 Location: Missouri Posts: 1,502	Re: FS: Custom 80mm led fans, 92mm fan, Modder's Mesh If I could get the mesh for $10 shipped then we might have something. I do need a new fan but I need UV instead of orange... __________________ Check out my Custom Etches Project Purple Aspire Project Tsunami Dream MY First Mod on a HP Pavilion 533w ASUS A8N32-SLI Deluxe Opteron 165 @ 2.7 3GB Corsair XMS DDR500 Corsair HX620 PSU EVGA 8600 GTS

14-July-06, 03:06 AM	#4 (permalink)
m3_tw0 Apex Tech Fanatic Supreme Join Date: Nov 2002 Location: Az Posts: 773	Re: FS: Custom 80mm led fans, 92mm fan, Modder's Mesh Its gonna cost me around $5 to ship the mesh so $10 isnt going to cover it and paypal fees.

14-July-06, 08:06 PM	#5 (permalink)
ratchetfps Apex Tech Fanatic Supreme Join Date: Jun 2006 Location: California Posts: 704	Re: FS: Custom 80mm led fans, 92mm fan, Modder's Mesh I'll take the mesh =) PM sent. __________________

19-July-06, 07:24 PM	#6 (permalink)
m3_tw0 Apex Tech Fanatic Supreme Join Date: Nov 2002 Location: Az Posts: 773	Re: FS: Custom 80mm led fans, 92mm fan, Modder's Mesh Everything Has Been Sold Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Painting Modder's Mesh	Plantmiester	Painting	7	24-June-06 12:50 AM
Modder's mesh kinda............	HigHTecHReDNecK	Deals and Steals	13	03-October-05 02:27 PM
Modder's mesh kinda * from deals forum*	HigHTecHReDNecK	Member Modding Tips and Guides	0	02-October-05 12:49 AM
FrozenCPU // 92mm Red Steel Mesh Filter / Grill (CASMF-92RD)	Gizmo	Vendor News RSS	0	18-May-05 03:12 PM
WTB: Bulk 80mm/92mm/120mm Fans.	Kage	Trading Post	10	24-January-04 07:30 PM