Well Folks the time has come to start clearing out a little stuff around here.....
I have a garage full of extra things that I don't need....So this thread may grow more and more over the next few weeks as I get rid of lots of parts, supplies, and misc computer stores I no longer need laying around making momma angry at me for dominating half the garage.

The first two items are the most valuable to see if anyones interested....

Up First....

The Famous Digital-SnoCone maker....
Thats right the original prototype of the Zenzzovap -60 Phase Change Unit...
This unit was built on an aluminum frame set so that it would fit on top of most cases...And even inside some larger server tower cases...
Its 110V AC power....completely.....Requires no extra hook up for the 12v fan.....
The fan is a 110V rotron....and its pretty insane..
Extra care was taken in the tube bending on this one as I can be a rather anal retentive prick when it comes to asthetics....
You have seen units like this before sell for $700.00 or higher on xtremesystems.org....and many smaller less capable brand name units go for well over $1000.00 Most the brand name units like the VAPOCHILL may go down to -20 but thats about it....
This puppy can hit -60 and will give you less then -40 on load for sure....
-40 is the sweet spot that unlocks most chips to insane capabilities....
We had a simple 533mhz p4 stock 2.53 running at 3.4Ghz with this phase unit....
and the 2.4C hit 4.3 Ghz.....
See this thread.....
http://forums.pcapex.com/extreme_coo...ght=digi+phase

Its not the most perfect beautifull unit....as it has seen some use....but it is complete, functional and ready to bolt up to any socket type you have....
The main head and the gasket kits are Chilly 1 kit...so replacement parts can be had....I will be more then willing to help you locate anything you need to get this working....
I am selling this for $450.00 plus ground shipping as this thing can not be flown due to the gasses in it...
If you are serious pm me and we can work something out to get this shipped affordably for you..

See Pics Below.....

Next is a Fortron FX700-GLN ATX12V/ EPS12V 700W All-In-One Power Supply
This is an SLI capable ATX 2.0 capable PSU....
I bought it for my Pressler/Crossfire Rig....and ended up using an OCZ instead...
It has some minor scratches on it from installing it into the LIAN-LI case......but the PSU has less then 5 hours on it......The crossfire cards when released would only work on single rail PSU's....this thing is ATX 2.0 capable....so it has 4 rails....
Its a great PSU and ran the system fine...but overclocking on a PRESSLER/CROSSFIRE setup might not be for you....
However if your using any AMD/NVIDIA setup...this thing screams....

System specs below are

Brand FSP Group (Fortron Source)
Model FX700-GLN
SPEC
Type ATX12V/ EPS12V
Maximum Power 700W
Fans 12Cm Ball Bearing Fan
PFC Active
Main Connector 20+4-Pin
Dual +12V 4 x +12V
SLI Support Support Dual GeForce 7900 GTX or Dual GeForce 7800GTX 512 MB
Modular Cabling Support No
Power Good Signal 100-500ms
Efficiency >85%
Over Voltage Protection YES
Input Voltage 115/230 V
Input Frequency Range 47 - 63Hz
Output +3.3@36A,+5V@30A,+12V1@15A,+12V2@15A,+12V3@15A,+12 V4@15A,-12V@0.5A,+5VSB@2A
MTBF >100,000 Hours
Approvals CSA,IEC,UL,CE,TUV
Features
Features NVIDIA SLI Certified
Supports the latest Intel ATX 2.0 standard. Improve the System
Compatibility
*Supports ATI Crossfire & nVidia SLI VGA Card Double +12V Design.
*Supports the latest AMD 64 CPU
*Conforms to WEEE & RoHS Environmental Directives in Europe
*Extremely low noise design, providing consumers with a quiet, good
operating environment
*Ultra high power of 700W, providing the super player enough power to
ensure a stable system
protection can protect each part of the computer.
*High quality blue cover coating
*12 cm light blue fan, enhancing heat dissipation and reaching the
minimum noise requirement
*Neat and tight mesh sleeving improves the ventilation.
*Smart Housing easy plugable D-type connector design.
*Honeycombed cooling vents on the case reduce noise and improve the
heat dissipation and air flow.
Warranty
Manufacturer Warranty 2year direct manufacturer warranty
I can get you the reciept for it should anything ever go wrong with it for RMA pourposes....so that makes the warranty transferable...

This model goes for $170.00 on newegg....I am selling this one for $140.00 plus shipping....Its practically brand new excpet for a few minor scratches...
I have the box and the manual as well....

See Pics below....


For all items...you can check my trader rating here....and on ebay under bsnider72

Any questions you can pm me.....add me to MSN as bsnider(at)woh.rr.com
or email me at my staff addy digitalworld(at)pcapex.com or bsnider(at)woh.rr.com

I can also answer questions by phone if you pm me the contact info to call you....

Attached Thumbnails

     

     

     

 

would this phase change do good if it were to run continuously? does it come with any cpu mounting hardware?
what are dimensions? wonder if it would fit in my coolermaster tower?
hrm...

let me know

You could put it in an enclosure and mount it underneath, I don't think it will fit inside.



http://www.vapochill.com/default.asp...on=2&menuID=-1

I have all the mounting hardware for the head unit....Including the backing plate....And such......There is also a new tube of armacell that you could cut your own donut rings from for sealing.

If anything ....parts are simple to find...Bolts can be had at hardware stores....and such.

Necro is right....You would need to put it in a seperate enclosure....or case on top, below or beside your current unit...Most run it just sitting on top of the current case....Thats what it was designed for...

I can in fact run 24/7 if thats your choice....

bumpity bump bump bump.....

450 for phase change!

Please tell me your posting this sale on other forums as well, I know there's someone out there who wants it.

Bump.

I am not.....but if you feel the urge to link it.....go for it...

I prefer to use PCApex for the method of sale...due to the protections and limitations....

Yah, this is a good forum to sell stuff on, but If I see taht someone is looking for it somewhere else, I'll send them straight to you

bumpity bump bump bump

Quote: Originally Posted by Digital-World bumpity bump bump bump

--------------------------------------------------------------------------------

bumpity bump bump bump

bump.....anyone?

Bump for outstanding prices and seller.

bump for a good product at a super low price

YGPM for the snowcone.

PLEASE PLEASE say YES!

Bump for Mister Digital World.

I'll buy the Phase-Change. I can Paypal you the cash by tomorrow evening :-)

I got your PM earlier. Still waiting for your reply.
My zip is for my home. I live in a small town close
to Jacksonville, Florida. I can drive in and pick it up
from any shipping warehouse in Jax's if it would be
cheaper shipping?

Sorry...I will call you tommorow when I get back to the house from classes....
I spent the day reloading this pc....
Got your PM......
You will hear from me tommorow...
Thanks
Barry