Wanted: Slot 1 / Socket 370 stuff

j-dogg · 23-April-06, 10:28 PM

I am looking for Pentium 3 Slot 1 stuff up to 600mhz, I have a few Slot 1 P3's but not in pairs and was hoping someone here had a 500 or 550 lying around with the same stepping I do.

Also if anyone has the lower-end Coppermine Skt370 P3's up to 600mhz, let me know, I have two slocket adapters waiting for processors. I have a Socket 370 P3 550 with an SL3R3 stepping code.

You guys know me, I got TONS of crap to trade, as a matter of fact I have a whole f*cking storage unit of stuff, modding supplies, black fans, etc. and if I on't have it I can get it for free or dirt cheap.

Thank you for looking

El Doug · 24-April-06, 02:59 PM

i have a pair of 933mhz, if your motherboards will accept that

j-dogg · 24-April-06, 04:17 PM

The board only supports up to 600mhz.

I found a 500 and if I remember correctly I have one with the same stepping at home, will let you all know what happens.

HigHTecHReDNecK · 24-April-06, 05:58 PM

Well , let us/me know , i have a pair of 600MHz slot 1's and 700 and 750 and 850 ** ithink**

musclecars&computers · 24-April-06, 06:11 PM

I got a pair of 600MHz ones and a single 533Mhz i think.

j-dogg · 25-April-06, 10:00 PM

Well I seemed to have found a real nice setup if it actually works.

I have two Skt370 866mhz P3's, and the board will run them at 650mhz, only problem is I only have one slocket adapter, the other has no jumper information on it, and NO ONE on the internet seems to know the settings (yes I googled it, 370SP, try it.)

If anyone has a Coppermine P3 Slocket adapter lying around that would work wonders for me. It must have jumper settings on the card for 66, 100 and 133mhz bus speeds, or have Coppermine compatibility. there are slight differences between Coppermine adapters and the regular Celeron Skt370 adapters.

thank you for looking

Kemosabe79 · 25-April-06, 10:11 PM

Quote:

Originally Posted by j-dogg


	Well I seemed to have found a real nice setup if it actually works. I have two Skt370 866mhz P3's, and the board will run them at 650mhz, only problem is I only have one slocket adapter, the other has no jumper information on it, and NO ONE on the internet seems to know the settings (yes I googled it, 370SP, try it.) If anyone has a Coppermine P3 Slocket adapter lying around that would work wonders for me. It must have jumper settings on the card for 66, 100 and 133mhz bus speeds, or have Coppermine compatibility. there are slight differences between Coppermine adapters and the regular Celeron Skt370 adapters. thank you for looking

I might have one I can give ya. My buddy is retiring a 800MHz coppermine machine that uses a slocket adapter. It has the jumper settings on it too. I know it does...This machine used to be mine.

I'll get back to you on it.

CubanConnectionZ · 25-April-06, 10:59 PM

Told you that those sloket card setting are hard to find.

jofultner · 30-April-06, 05:15 PM

I have a couple of socket 370-500mhz from gateway astro`s if interested.Jo

j-dogg · 30-April-06, 05:30 PM

Nah, already have two 500's running in it now.

I need a Coppermine Slocket Adapter but don't feel like paying 20 bucks for one, if anyone here has one laying around hook me up y0.

23-April-06, 10:28 PM		#1 (permalink)
j-dogg Mystical Schwinn Guru	Wanted: Slot 1 / Socket 370 stuff I am looking for Pentium 3 Slot 1 stuff up to 600mhz, I have a few Slot 1 P3's but not in pairs and was hoping someone here had a 500 or 550 lying around with the same stepping I do. Also if anyone has the lower-end Coppermine Skt370 P3's up to 600mhz, let me know, I have two slocket adapters waiting for processors. I have a Socket 370 P3 550 with an SL3R3 stepping code. You guys know me, I got TONS of crap to trade, as a matter of fact I have a whole f*cking storage unit of stuff, modding supplies, black fans, etc. and if I on't have it I can get it for free or dirt cheap. Thank you for looking

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LOOKING FOR A: Slot 1 to Super Socket 370 CPU Adapter Board. (AKA SLOCKET)	CubanConnectionZ	Trading Post	14	17-April-06 11:32 PM
Looking for a socket 370 converted to slot 1.	CubanConnectionZ	Trading Post	6	30-September-04 12:15 AM
Wanted; Slot 1 mobo (plus scsi?) or...	Ben	Trading Post	1	12-August-04 10:51 PM
Wanted: Slot A K7 800MHz to 1 GHz	j-dogg	Trading Post	2	23-February-04 03:06 PM

24-April-06, 02:59 PM		#2 (permalink)
El Doug Apex Advanced Techie	i have a pair of 933mhz, if your motherboards will accept that

24-April-06, 04:17 PM		#3 (permalink)
j-dogg Mystical Schwinn Guru	The board only supports up to 600mhz. I found a 500 and if I remember correctly I have one with the same stepping at home, will let you all know what happens.

24-April-06, 05:58 PM		#4 (permalink)
HigHTecHReDNecK Sophist'Hoe"cated ReDNecK Reviewer	Well , let us/me know , i have a pair of 600MHz slot 1's and 700 and 750 and 850 ithink

24-April-06, 06:11 PM		#5 (permalink)
musclecars&computers Apex Tech Demi-God	I got a pair of 600MHz ones and a single 533Mhz i think.

25-April-06, 10:00 PM		#6 (permalink)
j-dogg Mystical Schwinn Guru	Well I seemed to have found a real nice setup if it actually works. I have two Skt370 866mhz P3's, and the board will run them at 650mhz, only problem is I only have one slocket adapter, the other has no jumper information on it, and NO ONE on the internet seems to know the settings (yes I googled it, 370SP, try it.) If anyone has a Coppermine P3 Slocket adapter lying around that would work wonders for me. It must have jumper settings on the card for 66, 100 and 133mhz bus speeds, or have Coppermine compatibility. there are slight differences between Coppermine adapters and the regular Celeron Skt370 adapters. thank you for looking

25-April-06, 10:59 PM		#8 (permalink)
CubanConnectionZ Apex Tech God	Told you that those sloket card setting are hard to find.

30-April-06, 05:15 PM		#9 (permalink)
jofultner Apex Elite Tech	I have a couple of socket 370-500mhz from gateway astro`s if interested.Jo

30-April-06, 05:30 PM		#10 (permalink)
j-dogg Mystical Schwinn Guru	Nah, already have two 500's running in it now. I need a Coppermine Slocket Adapter but don't feel like paying 20 bucks for one, if anyone here has one laying around hook me up y0.