FS: Hydraulics and Wheels

Twizted · 28-March-06, 04:10 PM

Well, This is an odd item for a computer modding forum sale but since I know most of you are adults and have jobs and I was listing this stuff other places I figured I would list it here also...

What I have is a CCE Hydraulic Setup 2Pump 4Dump.

2 - CCE Black on Chrome Pumps (1 New) w/ Dumps and Fittings, One Pressure Gauge, and Back Plates for Tanks
2 - 8inch cylinders (Front)
2 - 14inch cylinders (Rear)
2 - 15 foot hoses (Front)
2 - approx 4 foot hoses (Rear)
2 - Prestolite Solenoids (New)
1 - Prewires Switch Box (New)
8 - Deep cycle Marine Batteries w/Cables and Clamps
A few other odds and ends

This all has around 30 minutes total use on it....

Naturally I would be looking for someone who lived within a reasonable distance so we could work out meeting to sell this cause well... 8 Marine batteries that weigh around 80+lbs each would be a little expensive...

Next I have a full set of 13" Player Wire Wheels including a spare! They are in excellent condtion and all have brand new tires on them..... Two have been on the road for around 20 miles give or take but still look brand new!... They have the center cap and spinners but no bolt ($5 for new ones).... They are 5x5.5"... Single pattern only... Very heavy wheels.. Not a cheap asian knockoff!! The wheels were around $475 new (I got them slightly used but in perfect condition) and I have over $350 in the new tires (all 5 wheels have new matching tires) but as I no long need them you can make out like a bandit!

I have listed these as seperate items on all others places but I am listing them as seperate or for a better deal as a set...

Prices....

Hydraulics..... $2400 OBO (I have ALOT more than that in this setup!)
Wheels.......... $400 OBO (I have over $350 in tires alone on them, just don't need them anymore)

If you will buy both... I will give you $200 off.... so you can make out with around $825 in Wheels and well over $2500 in hydraulics for only $2600...

Info....

twiztid -AT- highland -DOT- net
Trader Rating to the left...
Any concerns about Rep ask here on PCA....
Live contact info available upon request....

I will add pics soon

Twizted · 28-March-06, 10:09 PM

Bump for the night crowd....

I would also concider trades.... but really looking to get money for a car....

ati_killer · 30-March-06, 02:05 AM

sweet setup!!

very awsome deal you got thier if i get a 1987 caddy im looking at i might give ya a pm!!!

Twizted · 19-April-06, 11:21 AM

Pics of the wheels.....

The wheels are dirty, Dust and finger prints.... They have been setting for a LONG time unused!

Twizted · 20-April-06, 09:30 AM

Pics of the Hydraulics setup, Keep in Mind. one of the Prestolite block solenoids is not pictured *I broke the first one when tightening the bolt and had it replaced* nor is the Switch box in the picture... I will take pics of these later or on request....

28-March-06, 04:10 PM	#1 (permalink)
Twizted Editor/Reviewer/LED Guru Join Date: Sep 2002 Location: Eau Claire, WI Posts: 3,347	FS: Hydraulics and Wheels Well, This is an odd item for a computer modding forum sale but since I know most of you are adults and have jobs and I was listing this stuff other places I figured I would list it here also... What I have is a CCE Hydraulic Setup 2Pump 4Dump. 2 - CCE Black on Chrome Pumps (1 New) w/ Dumps and Fittings, One Pressure Gauge, and Back Plates for Tanks 2 - 8inch cylinders (Front) 2 - 14inch cylinders (Rear) 2 - 15 foot hoses (Front) 2 - approx 4 foot hoses (Rear) 2 - Prestolite Solenoids (New) 1 - Prewires Switch Box (New) 8 - Deep cycle Marine Batteries w/Cables and Clamps A few other odds and ends This all has around 30 minutes total use on it.... Naturally I would be looking for someone who lived within a reasonable distance so we could work out meeting to sell this cause well... 8 Marine batteries that weigh around 80+lbs each would be a little expensive... Next I have a full set of 13" Player Wire Wheels including a spare! They are in excellent condtion and all have brand new tires on them..... Two have been on the road for around 20 miles give or take but still look brand new!... They have the center cap and spinners but no bolt ($5 for new ones).... They are 5x5.5"... Single pattern only... Very heavy wheels.. Not a cheap asian knockoff!! The wheels were around $475 new (I got them slightly used but in perfect condition) and I have over $350 in the new tires (all 5 wheels have new matching tires) but as I no long need them you can make out like a bandit! I have listed these as seperate items on all others places but I am listing them as seperate or for a better deal as a set... Prices.... Hydraulics..... $2400 OBO (I have ALOT more than that in this setup!) Wheels.......... $400 OBO (I have over $350 in tires alone on them, just don't need them anymore) If you will buy both... I will give you $200 off.... so you can make out with around $825 in Wheels and well over $2500 in hydraulics for only $2600... Info.... twiztid -AT- highland -DOT- net Trader Rating to the left... Any concerns about Rep ask here on PCA.... Live contact info available upon request.... I will add pics soon __________________ Last edited by Twizted; 28-March-06 at 10:13 PM.

28-March-06, 10:09 PM	#2 (permalink)
Twizted Editor/Reviewer/LED Guru Join Date: Sep 2002 Location: Eau Claire, WI Posts: 3,347	Bump for the night crowd.... I would also concider trades.... but really looking to get money for a car.... __________________

19-April-06, 11:21 AM	#4 (permalink)
Twizted Editor/Reviewer/LED Guru Join Date: Sep 2002 Location: Eau Claire, WI Posts: 3,347	Pics of the wheels..... The wheels are dirty, Dust and finger prints.... They have been setting for a LONG time unused! __________________

20-April-06, 09:30 AM	#5 (permalink)
Twizted Editor/Reviewer/LED Guru Join Date: Sep 2002 Location: Eau Claire, WI Posts: 3,347	Pics of the Hydraulics setup, Keep in Mind. one of the Prestolite block solenoids is not pictured I broke the first one when tightening the bolt and had it replaced nor is the Switch box in the picture... I will take pics of these later or on request.... __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30-March-06, 02:05 AM	#3 (permalink)
ati_killer Banned Join Date: Mar 2006 Location: Forest City, NC Posts: 2	sweet setup!! very awsome deal you got thier if i get a 1987 caddy im looking at i might give ya a pm!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do you spend too much $$$ on cut-off wheels?	ratchetfps	Deals and Steals	7	24-December-06 11:22 AM
I've got new wheels!!	NCXCStud	Anything Goes	5	13-March-06 11:45 PM
Your ride need some new Wheels???	m3_tw0	Anything Goes	10	05-September-03 09:30 AM
Cutting wheels	putwig	Case Modding	6	25-March-03 02:27 PM
hydraulics info	Sk8forMaple	Other Modding	7	06-March-03 01:46 AM