Epox 8RDA+ for sale

psychofunk · 18-June-03, 07:49 PM

Board for sale $70 shipped obo in cont. US. Had it since feb. Used 1-3 hours a day. XP2100 at stock volt run at 166mhz. Active cooling on the NB, passive on the SB & mosfets. It is an A3 stepping. What else you wanna know?

putwig · 18-June-03, 07:58 PM

Why are you selling it?

psychofunk · 18-June-03, 10:48 PM

I have had it with the boards issue with corsair XMS3200CL2 mem. When I oc if I go a little to far I have to get a stick of crappy ram (which I have to borrow from work) to get back into the bios, just to reset everything to what I had before and start all over again. Then take the crappy ram out and redo the whole thing. I really don't like that so I ordered an NF7-S ver 2.0 which will be here tomorrow, so no turning back now.

V4mpiro · 18-June-03, 11:00 PM

You didnt need ram to do that you could have just jumpered the CMOS....

MR.G · 18-June-03, 11:05 PM

well d@mn I hope they fixed this problem with the 8rda3+. Guess i'll find out when i get my new cpu and some corsair 3200

psychofunk · 19-June-03, 12:01 AM

Quote:


	Originally posted by V4mpiro You didnt need ram to do that you could have just jumpered the CMOS....

That is actually the problem as the board will not boot up at all, it stops with the C1 error and that is because the boards stock timings are too high and the XMS say's screw you so the boad say srew you back and I end up saying screw both of you (as you can tell I am short on patience). Either way my ignorance can be your gain as the same board is going for $90+shipping or more everywhere else. I am selling it no matter what as my abit 2.0 will be here tomorrow.

Quote:


	Originally posted by MR.G well d@mn I hope they fixed this problem with the 8rda3+. Guess i'll find out when i get my new cpu and some corsair 3200

Sorry, I have no idea, I hope so too if you have XMS.

Ace123 · 21-June-03, 03:59 PM

Lmao I want it! haha

Maverick · 21-June-03, 04:12 PM

All you have to do is hold the insert keydown while booting and it will boot bck at below default specs. Thats what I did with my 1.4 until I got my 2500+ the other day. I have the same board.

Ace123 · 22-June-03, 10:27 PM

Ill give ya 65 for it

mirage · 22-June-03, 11:45 PM

That can be fixed with a bios flash. I had the same problem with my GEIL and thats all I had to do.

Ace123 · 23-June-03, 02:49 AM

65 ok? Ill give you 65 lol

Fu3lman · 23-June-03, 05:38 AM

ill trade you a shoe for it

stormshaman · 23-June-03, 05:44 AM

I might, for $70, but if it's broke, I want my money back.

hawklen · 23-June-03, 10:16 AM

Quote:


	Originally posted by Maverick All you have to do is hold the insert keydown while booting and it will boot bck at below default specs. Thats what I did with my 1.4 until I got my 2500+ the other day. I have the same board.

Doesn't work in all circumstances mav. Ive gone too far with my MSI board, hey thought i'd be fun to see if hynix PC2100 would run at 200fsb. I had to set the jumper to 100mhz fsb, into BIOS change settings, return jumper to default 133mhz fsb, and presto it worked. Thats the thing I love about this MSI board, no matter how much you screw up. Its fixable

And fu3l, to your shoe, I rasie you a boot and a sock.

Ace123 · 25-June-03, 12:18 AM

Are you still selling this thing or what?

stormshaman · 25-June-03, 02:35 AM

Yeah, if you are selling, I am buying because I am broke cant afford newegg even ($85)

Fu3lman · 25-June-03, 04:48 AM

ok, a boot, sock, shoe, and a used phone card

stormshaman · 25-June-03, 05:04 AM

two boots, one sock, some flip flops, a library card, and a red and yellow striped tie

Fu3lman · 25-June-03, 05:17 AM

dude, ill take the tie and the library card for my sock and shoe

hawklen · 25-June-03, 10:37 AM

Ill take teh two boots, m,ine are falling apart.

18-June-03, 07:49 PM		#1 (permalink)
psychofunk Funky Psych-Hoe	Epox 8RDA+ for sale Board for sale $70 shipped obo in cont. US. Had it since feb. Used 1-3 hours a day. XP2100 at stock volt run at 166mhz. Active cooling on the NB, passive on the SB & mosfets. It is an A3 stepping. What else you wanna know?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Epox 8rda+ for sale....Dead bios	Dimazz	Trading Post	1	19-January-05 08:34 PM
Epox 8rda+ owners	flounder405	Motherboards / CPUs	2	06-January-04 11:25 PM
epox help	flounder405	Other Hardware	6	01-May-03 08:38 AM
Epox EP-8RDA+ Review @ NinjaLane.com...	Skew	PC Apex Web News	0	26-March-03 11:42 PM
EPoX 8RDA+ nForce2 Review @ VR-Zone.com...	Skew	PC Apex Web News	0	10-January-03 02:56 AM

18-June-03, 07:58 PM		#2 (permalink)
putwig Dr. Hydro Pimp	Why are you selling it?

18-June-03, 10:48 PM		#3 (permalink)
psychofunk Funky Psych-Hoe	I have had it with the boards issue with corsair XMS3200CL2 mem. When I oc if I go a little to far I have to get a stick of crappy ram (which I have to borrow from work) to get back into the bios, just to reset everything to what I had before and start all over again. Then take the crappy ram out and redo the whole thing. I really don't like that so I ordered an NF7-S ver 2.0 which will be here tomorrow, so no turning back now.

18-June-03, 11:00 PM		#4 (permalink)
V4mpiro Apex Tech Fanatic	You didnt need ram to do that you could have just jumpered the CMOS....

18-June-03, 11:05 PM		#5 (permalink)
MR.G Apex Master Tech Apprentice	well d@mn I hope they fixed this problem with the 8rda3+. Guess i'll find out when i get my new cpu and some corsair 3200

21-June-03, 03:59 PM		#7 (permalink)
Ace123 Apex Tech Fanatic Supreme	Lmao I want it! haha

21-June-03, 04:12 PM		#8 (permalink)
Maverick Apex Elite Expert Tech	All you have to do is hold the insert keydown while booting and it will boot bck at below default specs. Thats what I did with my 1.4 until I got my 2500+ the other day. I have the same board.

22-June-03, 10:27 PM		#9 (permalink)
Ace123 Apex Tech Fanatic Supreme	Ill give ya 65 for it

22-June-03, 11:45 PM		#10 (permalink)
mirage Apex Advanced Techie	That can be fixed with a bios flash. I had the same problem with my GEIL and thats all I had to do.

23-June-03, 02:49 AM		#11 (permalink)
Ace123 Apex Tech Fanatic Supreme	65 ok? Ill give you 65 lol

23-June-03, 05:38 AM		#12 (permalink)
Fu3lman Light My Fire	ill trade you a shoe for it

23-June-03, 05:44 AM		#13 (permalink)
stormshaman Apex Advanced Techie	I might, for $70, but if it's broke, I want my money back.

25-June-03, 12:18 AM		#15 (permalink)
Ace123 Apex Tech Fanatic Supreme	Are you still selling this thing or what?

25-June-03, 02:35 AM		#16 (permalink)
stormshaman Apex Advanced Techie	Yeah, if you are selling, I am buying because I am broke cant afford newegg even ($85)

25-June-03, 04:48 AM		#17 (permalink)
Fu3lman Light My Fire	ok, a boot, sock, shoe, and a used phone card

25-June-03, 05:04 AM		#18 (permalink)
stormshaman Apex Advanced Techie	two boots, one sock, some flip flops, a library card, and a red and yellow striped tie

25-June-03, 05:17 AM		#19 (permalink)
Fu3lman Light My Fire	dude, ill take the tie and the library card for my sock and shoe

25-June-03, 10:37 AM		#20 (permalink)
hawklen PCApex's Mouthy Stepchild	Ill take teh two boots, m,ine are falling apart.