FS/FT Zalman ZM-80D Dual Heatpipe Yadda Yadda

SexyPants · 06-September-04, 02:55 PM

Well, I screwed up again, but this time you guys can profit off of it. I bought a Zalman ZM-80D Dual Heatpipe Noiseless VGA cooler (this sucker) but looking at the back of the package and looking at my motherboard.... that sucker won't fit. The RAM is right in the way no matter where I put them. So I'm going to sell it for hopefully 30 dollars plus shipping. The package has NEVER been opened but I left my reciept at home before I left for college. Sucks. Anyway, I'll also gladly trade it for one of those neat-o new arctic cooler silencer series fans, new or used. Happy shopping to you

SexyPants · 07-September-04, 02:33 PM

Bump and Drop. Twenty-five plus shipping

Joose · 07-September-04, 02:40 PM

Any conflicts with the IC7-G motherboard?
also, wll it fit on an ATI Radeon 9500 Pro, with the memory along the top of the card?

Know where I could find this information?

stereomod · 07-September-04, 02:42 PM

Quote:

Originally Posted by pimp_joose


	Any conflicts with the IC7-G motherboard? also, wll it fit on an ATI Radeon 9500 Pro, with the memory along the top of the card? Know where I could find this information?

heh those answers and more on google.com

Remember google is your friend!

Spectrum · 07-September-04, 03:11 PM

Zalman's website for the heatpipe say its compatible with virtually any card, and gives some measurements for the holes to figure out compatibility. Here it is in all its glory.

Joose · 07-September-04, 03:16 PM

Quote:

Originally Posted by stereomod


	heh those answers and more on google.com Remember google is your friend!

Google? Never heard of it.
.

Quote:

Originally Posted by Spectrum


	Zalman's website for the heatpipe say its compatible with virtually any card, and gives some measurements for the holes to figure out compatibility. Here it is in all its glory.

C'mon guys, give me some credit here.

I did a Google search and found next to nothing. He mentioned something on the box indicating incompatibilities with this motherboard. I wanted to know if my motherboard was mentioned on the box too, because there is next to NO information on the Zalman site. (Fits everything!!!

riiight...

) Also, my computer is at home, I'm at work. No way for me to measure anything here...

SexyPants · 07-September-04, 03:46 PM

From the back of the box: "This product can be installed if the Northbridge cooler is shorter than 25mm from the board's base, or if taller be at least 5.5mm away from the AGP slot. "

Also.

"If a zalman CNPS7000 series cooler is used the CPU retention guide should be at least 35mm away from the AGP slot to install this product."

They don't mention where the DIMMs are, but just make sure they're to right of the board, not above it (if above, I'd imagine the 5.5mm rule still applies)

EDIT: No specific motherboard recommendations on the back. Sorry, Joose.

Btw, guys, it comes with a bitchin' screwdriver

SexyPants · 10-September-04, 01:23 PM

BUMMMP. 20 dollars. That's it guys.

NoSlak · 10-September-04, 01:27 PM

I'll take it if PJ doesn't want it but ask him first.
Im not at home right now but will be in about 5 hours.

SexyPants · 10-September-04, 03:32 PM

The Joose doesn't want it. If you want it, NoSlak, it's yours.

Zer0s · 10-September-04, 03:48 PM

I want if the second deal falls through.

Dakas · 10-September-04, 06:57 PM

Gah, looks like I missed my train by about 6 hours. bummer.

danbanger · 11-September-04, 10:40 PM

PM me if the above falls through

I doubt I would have that much good luck haha.

Demon Made · 11-September-04, 10:43 PM

i want in line too...

TekXoID · 11-September-04, 10:50 PM

Looking at your board, the ZM-80D should just clear the first dimm, and if not,
you can just move your ram out of the purple slot into the green slots. It will fit.

SexyPants · 12-September-04, 03:42 AM

TekX, are you talking about my board? I can't even open the DIMM levers fully with both in green slots with my 9800 pro. You're factoring the heatpipes too, right?

Zer0s · 12-September-04, 03:43 AM

have you decided who will get this beaut of a cooler?

SexyPants · 12-September-04, 11:34 AM

I'm currently awaiting NoSlak's reply, although TekX has me a little interested

EDIT: Yeah, that sucker is NoSlak's

06-September-04, 02:55 PM		#1 (permalink)
SexyPants 5-Hoe-1 Jeans	FS/FT Zalman ZM-80D Dual Heatpipe Yadda Yadda Well, I screwed up again, but this time you guys can profit off of it. I bought a Zalman ZM-80D Dual Heatpipe Noiseless VGA cooler (this sucker) but looking at the back of the package and looking at my motherboard.... that sucker won't fit. The RAM is right in the way no matter where I put them. So I'm going to sell it for hopefully 30 dollars plus shipping. The package has NEVER been opened but I left my reciept at home before I left for college. Sucks. Anyway, I'll also gladly trade it for one of those neat-o new arctic cooler silencer series fans, new or used. Happy shopping to you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zalman VF900-Cu VGA Heatpipe GPU Cooler $38	PurpleDiamond	Deals and Steals	3	16-April-06 08:14 AM
Zalman Heatpipe and an All-In-Wonder...	Cyno01	Video Cards	2	08-April-04 11:47 PM
Zalman Heatpipe and an All-In-Wonder...	Cyno01	Heatsinks / fans	2	07-April-04 11:40 AM
Zalman ZM-2HC1 Heatpipe Drive Cooler	Red02	PC Apex Web News	0	13-October-03 05:55 PM
Zalman ZM80A-HP Heatpipe VGA Cooler	scapegoat	PC Apex Web News	2	02-August-03 10:33 AM

07-September-04, 02:33 PM		#2 (permalink)
SexyPants 5-Hoe-1 Jeans	Bump and Drop. Twenty-five plus shipping

07-September-04, 02:40 PM		#3 (permalink)
Joose Joosey	Any conflicts with the IC7-G motherboard? also, wll it fit on an ATI Radeon 9500 Pro, with the memory along the top of the card? Know where I could find this information?

07-September-04, 03:11 PM		#5 (permalink)
Spectrum Former GameApex Editor	Zalman's website for the heatpipe say its compatible with virtually any card, and gives some measurements for the holes to figure out compatibility. Here it is in all its glory.

07-September-04, 03:46 PM		#7 (permalink)
SexyPants 5-Hoe-1 Jeans	From the back of the box: "This product can be installed if the Northbridge cooler is shorter than 25mm from the board's base, or if taller be at least 5.5mm away from the AGP slot. " Also. "If a zalman CNPS7000 series cooler is used the CPU retention guide should be at least 35mm away from the AGP slot to install this product." They don't mention where the DIMMs are, but just make sure they're to right of the board, not above it (if above, I'd imagine the 5.5mm rule still applies) EDIT: No specific motherboard recommendations on the back. Sorry, Joose. Btw, guys, it comes with a bitchin' screwdriver

10-September-04, 01:23 PM		#8 (permalink)
SexyPants 5-Hoe-1 Jeans	BUMMMP. 20 dollars. That's it guys.

10-September-04, 01:27 PM		#9 (permalink)
NoSlak Gridiron	I'll take it if PJ doesn't want it but ask him first. Im not at home right now but will be in about 5 hours.

10-September-04, 03:32 PM		#10 (permalink)
SexyPants 5-Hoe-1 Jeans	The Joose doesn't want it. If you want it, NoSlak, it's yours.

10-September-04, 03:48 PM		#11 (permalink)
Zer0s Apex Tech God	I want if the second deal falls through.

10-September-04, 06:57 PM		#12 (permalink)
Dakas Apex Master Tech	Gah, looks like I missed my train by about 6 hours. bummer.

11-September-04, 10:40 PM		#13 (permalink)
danbanger Apex Tech Fanatic Supreme	PM me if the above falls through I doubt I would have that much good luck haha.

11-September-04, 10:43 PM		#14 (permalink)
Demon Made Apex Tech Fanatic	i want in line too...

11-September-04, 10:50 PM		#15 (permalink)
TekXoID Banned	Looking at your board, the ZM-80D should just clear the first dimm, and if not, you can just move your ram out of the purple slot into the green slots. It will fit.

12-September-04, 03:42 AM		#16 (permalink)
SexyPants 5-Hoe-1 Jeans	TekX, are you talking about my board? I can't even open the DIMM levers fully with both in green slots with my 9800 pro. You're factoring the heatpipes too, right?

12-September-04, 03:43 AM		#17 (permalink)
Zer0s Apex Tech God	have you decided who will get this beaut of a cooler?

12-September-04, 11:34 AM		#18 (permalink)
SexyPants 5-Hoe-1 Jeans	I'm currently awaiting NoSlak's reply, although TekX has me a little interested EDIT: Yeah, that sucker is NoSlak's