Problem With Audiologey 2 Sound And Don't Have Installation Cd.

BACHULAR_ANGEL · 02-June-05, 01:28 PM

Helo
Every Body

Plz. Help Me , I Bought A Used Sb Audiology 2 Card With Out Intallation Cd. I Didn't Know That It's Not On Line . I Just Downloded The Deriver And And Run With My Creative 4.1 Speakers My Card Working Only With 2 Speakers And 2 Speakers Are Dead.

So Any Body Can Tell Me Thats What Wrong And How Can I Get The Softwear And Run All Speakers .if Some Body Help Me To Get The Cd And Solve The Problem, That Will Be Appreciated.

Thanks

Bane · 02-June-05, 01:34 PM

Ouch. Where did you buy the Audigy2 card? Usually, you cant download the main software, only the drivers. Other components such as creative mediasource and drivers can be downloaded via the autoupdate feature on creative's webpage.
Oh, and try not to capitalize every first letter of each word.
And welcome to Pimprig

FunkyFresh · 02-June-05, 02:37 PM

What operating system are you using? You can set Windows to produce 4.1 output via Control Panel. For WinXP, there are instructions at Microsoft (about halfway down that page, "Configure Multichannel Support in Windows XP"). Windows 2000 has a similar function under Control Panel / Sounds and Multimedia / Audio tab / Sound Playback / Advanced button.

Creative does have a fair amount of software available for download for your card (here, for US users), but I doubt if you need most of it. My guess is it'll sound great if you download/install the drivers and configure Windows to run 4.1.

BACHULAR_ANGEL · 03-June-05, 03:57 PM

Quote:

Originally Posted by Bane


	Ouch. Where did you buy the Audigy2 card? Usually, you cant download the main software, only the drivers. Other components such as creative mediasource and drivers can be downloaded via the autoupdate feature on creative's webpage. Oh, and try not to capitalize every first letter of each word. And welcome to Pimprig

I bought the card from ebay, at that time i didn't know about it. any way thanks for your advise to not capatalize the first letter of the word.
tnaks

BACHULAR_ANGEL · 03-June-05, 04:00 PM

Quote:

Originally Posted by FunkyFresh


	What operating system are you using? You can set Windows to produce 4.1 output via Control Panel. For WinXP, there are instructions at Microsoft (about halfway down that page, "Configure Multichannel Support in Windows XP"). Windows 2000 has a similar function under Control Panel / Sounds and Multimedia / Audio tab / Sound Playback / Advanced button. Creative does have a fair amount of software available for download for your card (here, for US users), but I doubt if you need most of it. My guess is it'll sound great if you download/install the drivers and configure Windows to run 4.1.

thank you for your concern and help but i have already set my windows xp configration , what you told but i still get from 2 speakers, i think i have lost my mony. thats not possible you send me the image of the disk if you have i will pay for shipping.

any way thanks

FunkyFresh · 03-June-05, 04:28 PM

Hmm...Which model Creative 4.1 speakers do you have?

BACHULAR_ANGEL · 03-June-05, 06:37 PM

Quote:

Originally Posted by FunkyFresh


	Hmm...Which model Creative 4.1 speakers do you have?

I HAVE ANALOG SORRUND 4.1
THANKS

Enko · 03-June-05, 09:18 PM

you can try this website: http://www.driverheaven.net/showthread.php?t=75905

it has a modified audigy 4 driver that works with the audigy 2. improves the sound quality too plus everything says audigy 4 afterwards

Bane · 04-June-05, 02:34 AM

Here's another option for you. This group called the kX project has developed drivers/software to work with creative sound cards or any with the emu10k1/2 chipsets on soundcards. Creative audigys all have em. Try it out

They're supposed to be much better than the creative drivers/software...but i haven't had experience with em. Maybe some of you other guys have.

http://kxproject.lugosoft.com/index.php?skip=1

02-June-05, 01:28 PM		#1 (permalink)
BACHULAR_ANGEL Apex Techie Wannabe	Problem With Audiologey 2 Sound And Don't Have Installation Cd. Helo Every Body Plz. Help Me , I Bought A Used Sb Audiology 2 Card With Out Intallation Cd. I Didn't Know That It's Not On Line . I Just Downloded The Deriver And And Run With My Creative 4.1 Speakers My Card Working Only With 2 Speakers And 2 Speakers Are Dead. So Any Body Can Tell Me Thats What Wrong And How Can I Get The Softwear And Run All Speakers .if Some Body Help Me To Get The Cd And Solve The Problem, That Will Be Appreciated. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installation Problem	coolerguy1984	Anything Goes	4	01-January-07 09:50 PM
Onboard Sound problem	jerkykabab	Sound Cards	7	22-October-06 06:35 AM
Sound Problem turning into big problem	Fahye	Windows OS Problems	5	17-September-06 03:20 PM
This sound like a motherboard problem?	hikarugo	Motherboards / CPUs	9	01-August-06 08:56 AM
V9999/TD 128mb Geforce 6800 Installation problem	RolandIronfist	Video Cards	23	01-August-05 02:44 AM

LinkBacks (?) LinkBack to this Thread: http://www.forumapex.com/sound_cards/45134-problem_with_audiologey_2_sound_and_dont_have_installation_cd.html
Posted By	For	Type	Date
Moddified Audigy 4 Pro ISO is out! Download is now available - Page 36 - DriverHeaven.net	This thread	Refback	20-August-08 03:07 AM
Moddified Audigy 4 Pro ISO is out! Download is now available - DriverHeaven.net	This thread	Refback	29-June-08 12:36 AM

02-June-05, 01:34 PM		#2 (permalink)
Bane Apex Tech Fanatic	Ouch. Where did you buy the Audigy2 card? Usually, you cant download the main software, only the drivers. Other components such as creative mediasource and drivers can be downloaded via the autoupdate feature on creative's webpage. Oh, and try not to capitalize every first letter of each word. And welcome to Pimprig

02-June-05, 02:37 PM		#3 (permalink)
FunkyFresh 'Da Doctor of Funk	What operating system are you using? You can set Windows to produce 4.1 output via Control Panel. For WinXP, there are instructions at Microsoft (about halfway down that page, "Configure Multichannel Support in Windows XP"). Windows 2000 has a similar function under Control Panel / Sounds and Multimedia / Audio tab / Sound Playback / Advanced button. Creative does have a fair amount of software available for download for your card (here, for US users), but I doubt if you need most of it. My guess is it'll sound great if you download/install the drivers and configure Windows to run 4.1.

03-June-05, 04:28 PM		#6 (permalink)
FunkyFresh 'Da Doctor of Funk	Hmm...Which model Creative 4.1 speakers do you have?

03-June-05, 09:18 PM		#8 (permalink)
Enko Apex Tech God	you can try this website: http://www.driverheaven.net/showthread.php?t=75905 it has a modified audigy 4 driver that works with the audigy 2. improves the sound quality too plus everything says audigy 4 afterwards

04-June-05, 02:34 AM		#9 (permalink)
Bane Apex Tech Fanatic	Here's another option for you. This group called the kX project has developed drivers/software to work with creative sound cards or any with the emu10k1/2 chipsets on soundcards. Creative audigys all have em. Try it out They're supposed to be much better than the creative drivers/software...but i haven't had experience with em. Maybe some of you other guys have. http://kxproject.lugosoft.com/index.php?skip=1