[hwbot] SuperPi 1M ranking - Page 4

keepaf1 · 09-February-06, 02:04 AM

Quote:

Originally Posted by Cpt.Planet


	Im offering 10 bucks to whoever can beat my score by the next week. Cpt.Planet - 25.7 - Opty at 3.1ghz

10 BUCKS!

i would melt too many parts trying to play catch up with you "cpt"
maybe "Solid" could pull a few tweaks out of his hat

M4TR1Z · 09-February-06, 04:42 AM

LN2 ? Damn thats bad ****.......

At the moment i run it at :

CPU : 245Mhz FSB x 11; 1,575Volt @ 2933Mhz ; HT-Ratio 4x ; 16/16Bit
RAM : 245Mhz ; 2,8Volt ; 3/3/3/8/1T ;

Highest CPU Speed was 300Mhz FSB x 11 ; 1,650Volt .

But i wont benchmark with this because i think async i **** ( wont attack u but i think so )

Can u tell me plz what ns u reach and what bandwidth u have ?

41,7ns

7269MB/s Memorybandwidth

Think we will do some n1 battels m8.

Ator · 09-February-06, 09:31 AM

Quote:

Originally Posted by keepaf1


	10 BUCKS! i would melt too many parts trying to play catch up with you "cpt" maybe "Solid" could pull a few tweaks out of his hat

Unless I could get some BH5, I don't think I (or anyone for that matter) can beat that (once that CAB2E Opty of yours gets here we'll see, I can't wait!). I'm guessing that i'll be able to run 325x10 for benchmarking, RAM 1:1 2.5-4-4-10, since i've got TCCD memory and a Zally 9500 (compared to your broke 7000). We'll see next week.

Cpt.Planet · 09-February-06, 10:49 AM

Quote:

Originally Posted by M4TR1Z


	LN2 ? Damn thats bad **....... At the moment i run it at : CPU : 245Mhz FSB x 11; 1,575Volt @ 2933Mhz ; HT-Ratio 4x ; 16/16Bit RAM : 245Mhz ; 2,8Volt ; 3/3/3/8/1T ; Highest CPU Speed was 300Mhz FSB x 11 ; 1,650Volt . But i wont benchmark with this because i think async i ** ( wont attack u but i think so ) Can u tell me plz what ns u reach and what bandwidth u have ? 41,7ns 7269MB/s Memorybandwidth Think we will do some n1 battels m8.

I dont know the ns. I do know that I was pushing something like 7600mb per second in Sandra at DDR500. When I made those super pi runs i was at like DDR540.

Zaltan · 10-February-06, 01:58 PM

LOL, newer results only 5mins after the last one. I've gone sub 30 seconds on a Venice.

Zaltan · 10-February-06, 02:07 PM

*NEW SCORE*
http://img332.imageshack.us/img332/6...superpi4te.jpg

And heres a picture of my rig during this run. Temps were really good CPU LOAD TEMPS @ 1.64v were 31oC. Chipset temp was about 33oC @ 1.7v this was good for me as my chipset load is normally about 40oC.
http://img70.imageshack.us/img70/7801/021000013zv.jpg

Also, my mate lent me his Sapphire GTO2 as he just got a X1900XT. So I might be able to get some better 3Dmark scores soon.

Kemosabe79 · 10-February-06, 06:08 PM

Quote:

Originally Posted by Zaltan


	Zaltan - 29.922 - Venice @ 2.82ghz http://img332.imageshack.us/img332/6...superpi4te.jpg And heres a picture of my rig during this run. Temps were really good CPU LOAD TEMPS @ 1.64v were 31oC. Chipset temp was about 33oC @ 1.7v this was good for me as my chipset load is normally about 40oC. http://img70.imageshack.us/img70/7801/021000013zv.jpg Also, my mate lent me his Sapphire GTO2 as he just got a X1900XT. So I might be able to get some better 3Dmark scores soon.

LOL, thats exactly what I do while benching. Thats a good score for a Venice BTW.

Edit: @M4TR1Z- have you really taken that FX 55 to 3.3GHZ (300x11)? Is it stable at those speeds?

Zaltan · 10-February-06, 06:54 PM

Quote:

Originally Posted by Kemosabe79


	LOL, thats exactly what I do while benching. Thats a good score for a Venice BTW.

Thanks man. Just a another post before I forget (slightly drunk right now). Not that its that interesting here's a sandra picture on my memory bandwidth. I pwn the bandwidth.

http://img70.imageshack.us/img70/2821/bandwidth1qp.jpg

Kemosabe79 · 12-February-06, 09:24 PM

new score

Ator · 14-February-06, 01:57 AM

[hwbot]Ator - 26.921 - Opteron 146 @ 3144Mhz - RAM 1:1[/hwbot]

Zaltan · 14-February-06, 07:41 AM

nice one Ator, can't you run tighter timmings at that speed? Like 2.5 (CAS) 4 (RAS to CAS) 3 or 4 (RAS prechange) 7 or 8 (TRAS) 11 (TRC) 16 (idle timer - it best for TCCD in my experience), there what I run at ~620MHz.

Ator · 14-February-06, 09:25 AM

I dunno, I barely worked on it last night. I didn't have much time to do any tweaking, I just ran what worked. I had to use A64 Tweaker and ClockGen to get that speed.

I think the CAB2E's mem controller isn't as good as my ol' dually...I can't run DDR640-DDR650 like I used to.

Kemosabe79 · 14-February-06, 05:47 PM

Nice one Ator...Just dont think Im giving up yet

Im sure I can at least hit a high 26 seconds w/ my new ram and the overnight temps tomorrow

PurpleDiamond · 14-February-06, 11:44 PM

Tried SuperPi for the first time and scored 35.422
Now my chalange is to get into the top 4 socket 775 on PCApex

I think I am going to need a bigger fan

keepaf1 · 15-February-06, 02:05 AM

Quote:

Originally Posted by Ator


	I dunno, I barely worked on it last night. I didn't have much time to do any tweaking, I just ran what worked. I had to use A64 Tweaker and ClockGen to get that speed. I think the CAB2E's mem controller isn't as good as my ol' dually...I can't run DDR640-DDR650 like I used to.

cool time dude

right behind "solid".
are you using pc4800 ?

Ator · 15-February-06, 11:26 AM

Quote:

Originally Posted by keepaf1


	cool time dude right behind "solid". are you using pc4800 ?

Yup.

DDR630 for that SuperPI time. Crappy timings though...I need to get some better cooling.

Zaltan · 15-February-06, 11:49 AM

Quote:

Originally Posted by Ator


	Yup. DDR630 for that SuperPI time. Crappy timings though...I need to get some better cooling.

I have a 12CM fan blowing on my RAM, that helps quite a bit.

PurpleDiamond · 16-February-06, 02:49 AM

[hwbot] PurpleDiamond - 33.719 - Intel 630@3.9GHz RAM 867MHz[/hwbot]
OK, these are the results after doing some changes:
Before After
FSB 250MHz 260MHz
CPU 3.75GHz 3.9GHz
Mem 833MHz 867MHz
Timing 4-4-4-12 4-4-4-12
Result 35.422 33.719

Screenshot:

Yes!!! I made it into the top 4 Socket 775.
At 266FSB the machine can't benchmark - I may need to raise the VCore.

To be continued...

Ator · 17-February-06, 02:08 AM

[hwbot] Ator - 26.609 - AMD Opteron 146 @ 3148Mhz - RAM 1:1[/hwbot]

Did some timing tweaks with the RAM...dropping the Idle Cycle timer, and speeding up the Refresh Rate really helped me the most here. I need some "sweet" air to get any higher than this!

Kemosabe79 · 17-February-06, 04:27 PM

Quote:

Originally Posted by Ator


	Did some timing tweaks with the RAM...dropping the Idle Cycle timer, and speeding up the Refresh Rate really helped me the most here. I need some "sweet" air to get any higher than this!

Nice! I could use some sweet air myself. Its going to be 29F tomorrow night. I cant wait

BTW, how much did you drop the cycle timer and refresh rate by? How much effect did it have really?

Might try lowering your Trc & Trfc too. I dropped mine to 8 and 10 respectively. It made a significant difference as well.

10-February-06, 01:58 PM		#65 (permalink)
Zaltan Apex Tech God	LOL, newer results only 5mins after the last one. I've gone sub 30 seconds on a Venice. Last edited by Zaltan; 10-February-06 at 02:06 PM..

10-February-06, 02:07 PM		#66 (permalink)
Zaltan Apex Tech God	NEW SCORE http://img332.imageshack.us/img332/6...superpi4te.jpg And heres a picture of my rig during this run. Temps were really good CPU LOAD TEMPS @ 1.64v were 31oC. Chipset temp was about 33oC @ 1.7v this was good for me as my chipset load is normally about 40oC. http://img70.imageshack.us/img70/7801/021000013zv.jpg Also, my mate lent me his Sapphire GTO2 as he just got a X1900XT. So I might be able to get some better 3Dmark scores soon. Last edited by Zaltan; 23-August-06 at 04:43 PM..

12-February-06, 09:24 PM		#69 (permalink)
Kemosabe79 whaaat? wheaties?	new score Last edited by Kemosabe79; 17-February-06 at 07:02 PM..

14-February-06, 01:57 AM		#70 (permalink)
Ator At-Whore	[hwbot]Ator - 26.921 - Opteron 146 @ 3144Mhz - RAM 1:1[/hwbot] Attached Thumbnails

14-February-06, 05:47 PM		#73 (permalink)
Kemosabe79 whaaat? wheaties?	Nice one Ator...Just dont think Im giving up yet Im sure I can at least hit a high 26 seconds w/ my new ram and the overnight temps tomorrow Last edited by Kemosabe79; 14-February-06 at 06:15 PM..

09-February-06, 04:42 AM		#62 (permalink)
M4TR1Z Apex Techie Wannabe	LN2 ? Damn thats bad **....... At the moment i run it at : CPU : 245Mhz FSB x 11; 1,575Volt @ 2933Mhz ; HT-Ratio 4x ; 16/16Bit RAM : 245Mhz ; 2,8Volt ; 3/3/3/8/1T ; Highest CPU Speed was 300Mhz FSB x 11 ; 1,650Volt . But i wont benchmark with this because i think async i ** ( wont attack u but i think so ) Can u tell me plz what ns u reach and what bandwidth u have ? 41,7ns 7269MB/s Memorybandwidth Think we will do some n1 battels m8.

14-February-06, 07:41 AM		#71 (permalink)
Zaltan Apex Tech God	nice one Ator, can't you run tighter timmings at that speed? Like 2.5 (CAS) 4 (RAS to CAS) 3 or 4 (RAS prechange) 7 or 8 (TRAS) 11 (TRC) 16 (idle timer - it best for TCCD in my experience), there what I run at ~620MHz.

14-February-06, 09:25 AM		#72 (permalink)
Ator At-Whore	I dunno, I barely worked on it last night. I didn't have much time to do any tweaking, I just ran what worked. I had to use A64 Tweaker and ClockGen to get that speed. I think the CAB2E's mem controller isn't as good as my ol' dually...I can't run DDR640-DDR650 like I used to.

14-February-06, 11:44 PM		#74 (permalink)
PurpleDiamond Apex Tech Maniac Supreme	Tried SuperPi for the first time and scored 35.422 Now my chalange is to get into the top 4 socket 775 on PCApex I think I am going to need a bigger fan

16-February-06, 02:49 AM		#78 (permalink)
PurpleDiamond Apex Tech Maniac Supreme	[hwbot] PurpleDiamond - 33.719 - Intel 630@3.9GHz RAM 867MHz[/hwbot] OK, these are the results after doing some changes: Before After FSB 250MHz 260MHz CPU 3.75GHz 3.9GHz Mem 833MHz 867MHz Timing 4-4-4-12 4-4-4-12 Result 35.422 33.719 Screenshot: Yes!!! I made it into the top 4 Socket 775. At 266FSB the machine can't benchmark - I may need to raise the VCore. To be continued... Last edited by PurpleDiamond; 20-February-06 at 12:14 PM..

17-February-06, 02:08 AM		#79 (permalink)
Ator At-Whore	[hwbot] Ator - 26.609 - AMD Opteron 146 @ 3148Mhz - RAM 1:1[/hwbot] Did some timing tweaks with the RAM...dropping the Idle Cycle timer, and speeding up the Refresh Rate really helped me the most here. I need some "sweet" air to get any higher than this! Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[hwbot] PiFast ranking	hwbot	Results	156	25-September-08 01:09 AM
[hwbot] superpi 32M ranking	hwbot	Results	127	18-May-08 03:01 PM
[hwbot] CPU-Z mhz ranking?	THRASHER2	Results	18	16-May-07 09:53 PM
[hwbot] PCmark2004 ranking	hwbot	Results	68	10-April-07 04:57 AM

LinkBacks (?) LinkBack to this Thread: http://www.forumapex.com/results/60743-hwbot_superpi_1m_ranking.html
Posted By	For	Type	Date
"superpi 1m" - topic profile :: BoardReader	This thread	Refback	23-February-08 01:41 PM
"superpi 1M results" - topic profile :: BoardReader	This thread	Refback	22-February-08 06:21 AM
"superpi q6600" - topic profile :: BoardReader	This thread	Refback	12-February-08 05:08 AM
"SuperPi" - topic profile :: BoardReader	This thread	Refback	29-November-07 08:13 AM