Featured Worklog
Price Search
PC Apex Sponsor
PC Apex Sponsors
PC Apex RSS Feeds
| |||||||
| Project Worklogs This is the place to start your ongoing mod project threads. |
 |
| | LinkBack | Thread Tools | Display Modes |
28-July-06, 11:10 PM
| #1 (permalink) | |
| Sir Knight of Spamalot  |  Project: ßēŦǺ So here is the case I am working on: (pics are taken from HERE) Since they were already uploaded, I just used those pics. Heres what Im planning on doing ( in no particular order)
   Here is the work I did today. The PVC for the fan is to the left. I also bonded up the little holes on the bottom and started to fill in the crevice. I didnt have the correct size for the fan, so all I had was a pipe adapter. I chose to cut that. But while doing so I found something intresting... I might go to homedepot and get more of those adapters, They look Like Nuclear Cooling Towers! Sadly, I cant use this one, since it cracked when I was cutting it.. | |
|  | |
|
28-July-06, 11:19 PM
| #4 (permalink) | ||||||||||||||||||||||||
| Sir Knight of Spamalot | Re: Project: ßēŦǺ
yea, I was asking for suggestions. Im still open for anything that comes to mind  . | ||||||||||||||||||||||||
|
| | ||||||||||||||||||||||||
|
28-July-06, 11:29 PM
| #6 (permalink) | ||||||||||||||||||||||||
| Sir Knight of Spamalot | Re: Project: ßēŦǺ
THATs something I forgot to mention, Ive been here such a long time, that I figured if People knew Im going to put a window in, Im also going to put a CCL in...lol Thanks I am Also Putting this thing in: (its a Fan Bus) http://forums.pcapex.com/416709-post66.html | ||||||||||||||||||||||||
|
| | ||||||||||||||||||||||||
|
28-July-06, 11:38 PM
| #9 (permalink) | ||||||||||||||||||||||||
| Sir Knight of Spamalot | Re: Project: ßēŦǺ
Yeap, I made that myself. It took A LOT of time, and I had to get the drilling right. I used Auto Cad to do it and a calculator to make sure everything was evenly spaced. | ||||||||||||||||||||||||
|
| | ||||||||||||||||||||||||
|
29-July-06, 12:53 AM
| #12 (permalink) | |
| Sir Knight of Spamalot | Re: Project: ßēŦǺ Update- July 29 I got bored and decided to bondo the PVC Pipe to the Case (I really dont know what to call it..lol) Heres the inside which you may never see. I Dont know if I should leave the duct tape there, or take it off and bondo it. If I bondo, it would get more strength.  Heres 2 shots of testing how the fan will look Thats how I want it to be, I want it to Suck In, but I think it looks ugly This looks better. But that means I have to have 1 fan on the top Blowing in. I have an Idea of using the 4017 Decade Counter and Putting the LEDs inside the PVC so it looks like its spinning. For more Info See this: http://www.metku.net/index.html?path...lot2/index_eng Another Idea: Molex Lights http://www.metku.net/index.html?path...ight/index_eng | |
|
| | |
|
29-July-06, 12:07 PM
| #13 (permalink) | |
| Apex Master Tech | Re: Project: ßēŦǺ looking good so far. you want the front to blow in (suck in) or else your cooling will be very iffy. you could always just paint over the sticker.. or im not sure but if you flip the pos and neg on the motor would it spin reverse? | |
|
| | |
|
29-July-06, 01:28 PM
| #14 (permalink) | |
| Apex Tech Fanatic Supreme  | Re: Project: ßēŦǺ OK I'm confused. Isn't it blowing in the direction of the sticker? Don't 99.999% of fans work that way? Sticker out = exhaust. Also, why aren't those pics sizing down? Lookin good btw Last edited by Seyeklopz; 29-July-06 at 01:36 PM.. | |
|
| | |
|
29-July-06, 02:36 PM
| #17 (permalink) | ||||||||||||||||||||||||
| Sir Knight of Spamalot | Re: Project: ßēŦǺ
Nope, the fan wont spin. Air Enters Through the stickier side and blows from the good side. So if I have the good side facing me, It will Suck Outward (it will blow). Its no reversed, i have a fan thats the opposite of that, but its from germany. | ||||||||||||||||||||||||
|
| | ||||||||||||||||||||||||
|
29-July-06, 02:44 PM
| #18 (permalink) | |
| Apex Master Tech Apprentice  | Re: Project: ßēŦǺ You mentioned painting plexi for the drive bays. Not sure if your going to stealth the drives or how many, but you might consider a couple of things. On my last plexi project, I painted the back of the plexi and gave it that deep gloss finish with no work needed to the visible side. Not sure how that would look in this particular project. The other idea is to cut and fit screen or modders mesh and bondo the are to match the rest of the paint and bezzel and help you on stealthing the drive(s). Just my opinion. I love plexi additions but I'm afraid it just won't match your project. | |
|
| | |
|
29-July-06, 06:53 PM
| #20 (permalink) | |
| Sir Knight of Spamalot | Re: Project: ßēŦǺ actually, I can do better. I'll tell you where I got em from. They were cheap, only 99 cents and blow 48CFM Dam, Looks like they dont sell them anymore. ADD: I made a mistake, Its a normal Fan :duh. But if you want a fan that goes in reverse (or atleast the opposite of an American Fan) Get this: http://bgmicro.com/prodinfo.asp?sid=...ri=Fan&stype=3 162CFM at 24V. I have a couple, and they blow! | |
|
| | |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Proposed Project: Project FlashyFlashy | DuplexEmotions | Project Worklogs | 8 | 03-December-07 05:37 PM |
| Project: V1 L1 | whore | Project Worklogs | 23 | 20-June-06 06:47 PM |
| Project Vcr | project vegas | Project Worklogs | 23 | 18-February-06 12:05 AM |
| first project. | leafsunbear | Project Worklogs | 24 | 06-July-05 04:55 AM |
| First Mod Project. | PhreakOne | Project Worklogs | 29 | 25-July-04 12:29 PM |
All times are GMT -5. The time now is 06:20 AM.
Advertisements
