Hey Pimps and Pimpettes,
I had so much fun with my case modding last year, I could not wait to start a new case mod this year, and capture it in a worklog. So with that being said, lets get into the fun stuff.

Its Summer again, and time to start another case mod [IMG]http://forums.pcapex.com/ />
- Totally Pimped Out
- Killer Paint


Deadline: End of August for ShowDown Lan. Yup, about 6 weeks to do a fully modded case. Lets see if I can pull it off.


First Post / Case Overview:

Here are some initial images of the hornet, as I disassemble all the parts and measure the pieces. My Dremel went MIA, so cutting updates will not be shown till the next post


Here is a picture of the 2 Hornet cases side by side in its stock form:




Here is a picture of the 2 hornet stacked on each other from the front view. Two full size hornet on top of each other is just too tall.




Here is a side view of the stacked hornet.











Here is a picture of the rear of the hornet. As you can see the hornet is designed for a mATX PSU. Hmm.. running SLI and Watercooling, a mATX PSU wonÂ’t be able to meet the power requirement. So I will be increasing the POWERAGE of the unit


Removable motherboard trays are always great to work with.


Here is a picture of all the internal guts of the case.


Here is the just bare frame after all the side panels and internal components have been removed.


Well, that was a little intro to my upcoming case mod. Since this mod needs to be done by the end of next month, updates should be coming up fairly quickly.

Any comments, suggestions, or input would greatly be appreciated.

Regards,

SAD

Good looking start!

**SIGH**

I wish i had the kinda £££ to just build what ever i could dream up... lol

Hornet eh? Black and yellow paint job me thinks? or is that just a bit too naff?

Consider me subscribed Good luck!


Mark


Mark

Looks like a good project. As an SFF fan myself, I'll be watching this one.

Sweeeet score on the 2 Hornets Let the Dremel Fly

30 day Mod
Ready.....Get Set ............GO!

Consider turning the bottom case upside down, so after it's cut, you still have psu mount and drive openings.

Really cool concept! Can't wait to see this one unfold.

Like Wordbiker, I've become a SFF fan myself. I'm looking forward to see what you do with this.

sounds very cool, good luck with that deadline man!

Hey folks,

Thank you so much for the best wishes on the deadline. THis is a very Ambitious project I have a lot ot things in my head right now that I am putting on paper, as I await parts to arrive.

I was actually in the garage tonight laying out some hardware and brainstorming a bit. Right now it looks liek I will be chopping both the top and bottom portion of the case. This will make the case even shorter, which will make it closer to a TRUE SFF case

Seyeklps - thanks for the suggestion of flipping the case upside down. The original PSU hole is for a mATX psu. I am going to mod a full size nVidia SLI certified PSU into the case. I really need the just for the CPU / SLI / WC.

If all goes well, I should be doing some work on the case tomorrow So hopefully there will be an update this weekend.

SAD

sweet man defintly gonna watch this. You may save a lot of time by getting some sheet metal and making a new section for the power supply. Any idea what color your doing yet for the paintjob?

I do have some sheet metal at home. Which I probably will be using. I really want to keep as much as of the original material as possible. It is made from alum, and it is so light weight, when compared to the sheet metal I have. I will probably need to re put sheetmetal on the front of the case to really layout a new front panel design.

As for paint... hehe.. I have some ideas in my head right now. To follow with the hornet theme, the case will be prodominatly Yellow and Black. Chrome / Alum / Shiny Metal will be the accent color. I have not finialized the lighting scheme yet.

Tonight brainstorming session went awesome.. my wife always comes up with some great concepts

I am going to see if I can plan them out, and make it happen

SAD

must be quite nice with the wifes approval. that paint job sounds like its going to be nice with the accents... GET WORKING ALREADY ahah.

Quick question - Does anyone know where I can get either any of these 120mm Fans: Solid Yellow or Yellow UV or Clear Fan w/ Yellow LED?

I'm trying to layout my color scheme right now, and black fans don't sound to nice

SAD

Recom yellow blade fans http://www.recom.nl/fans.html - http://www.recom.nl/coolers.html

How about these? http://www.phoronix.com/scan.php?pag...&item=75&num=1

There are 60 80 92 and 120 sizes

Cpu coolers and fans in same color, not quite yellow tho.. http://www.akasa.com.tw/

Red Yellow 'stove fan' http://www.logisyscomputer.com/views...YL&DID=COOLDEV

I'm not sure, but I thnk if you mix red and green led light, you get yellow.

Other yellow stuff

Grills http://www.svc.com/svg120rad-yel.html
Sleeve http://www.xpcgear.com/12sleeveyel.html
Shrink http://www.xpcgear.com/3heatshryel.html
Zips http://www.xpcgear.com/yellowwireties.html
Molex http://www.jab-tech.com/Connectorz-P...s-pr-2163.html
Jab-tec has lots of yellow stuff. Do a search
PSU http://www.xpcgear.com/500wseepsugld.html
Slot covers http://www.xpcgear.com/yellowslotkit.html

CCFL grill. http://www.pccasegear.com/prod3305.htm Get a tan.

Attached Thumbnails

 

Quote: Originally Posted by SuAsDu Quick question - Does anyone know where I can get either any of these 120mm Fans: Solid Yellow or Yellow UV or Clear Fan w/ Yellow LED? I'm trying to layout my color scheme right now, and black fans don't sound to nice SAD

I have never seen Yellow LED Fans
You might have to Custom make a 120mm fan with Yellow LED's

Seye,

Damn.. thanksf or all the links man. I forgot that "AMBER" is a dark shade of yellow. That might actually work out well As for the other parts.. I don't need yellow.. I will be doing some yellow paitning

As T2 says, I migt have to make some custom fans.

Thanks you 2 for your quick replies

Oh.. any ideas on how to get "REAL Yellow" UV reactive Liquid? I have some Dyelite that SB218 hooked me up with, but that is yellow - green. And all yellow uv liquire appear to be yellow-green

Any thoughts?

SAD

NP Love to see good projects like this.

I edited my post again. Those Recom fans look good.

I think one reason the uv yellow looks green is that uv leds shine some blue too. Most yellow dyes have a bit of green too, lan kids must think it's cool.

Interesting led review.. damn thats a yellow led. http://ledmuseum.home.att.net/ledyel.htm

i have never setup a WC setup in my life SO PLEASE DO NOT HOLD MY LIABLE!

but why not use some clear coolant and a few drops of yellow food coloring?

Seye - Damn.. those Recom yellow fans are AWESOME!!! But they are in NL. I did a froogle search, and came up blank in the US Going to try to search for them again a little later today.

Computerman - Yellow food color is not UV Reactive (this if i recall correctly). I am trying to go for a deep solid yellow that will glow. Some people have use yellow highlighter ink to make it UV reactive, but I never tried it. But thanks for the suggestion.

SAD