what im working on

vladimir · 03-December-02, 12:17 AM

well folks heres sum preview of what i was working on these past weeks

its gonna be a 15 port switch, and a router, and server in one box

the server is a p3 450 @ 503 mhz wit 256 ram, raid 8gb hdds, and a dually ethernet card....not that great, but can serve any game thats out there

here are sum pics its still much work in progress

yesturday i finished making the powersupply for this beast too, so its goin along pretty good

vladimir · 03-December-02, 12:19 AM

see mobo just slides out of the case

and theres the powersupply

flounder405 · 03-December-02, 12:26 AM

Damn Clown were you that excited to post this that you didnt finish the apple you were eating?

looks cool you make that mobo tray hindged?
Just a little confused on how it all works (the mobo tray)

vladimir · 03-December-02, 12:26 AM

nice sharp pic on the switch ports

vladimir · 03-December-02, 12:35 AM

vladimir · 03-December-02, 12:39 AM

ok this thing uptop shows which swich ports are in use, then power, and modes of switch..and those screws are actualy buttons

@ flounder its quite simple, to the bottom i bolted a 90 degree bracket like l shaped

drilled holes thorough there, and then made a frame for the mobo, and attached it to those L shaped brackets on the bottom of the case

chiquita · 03-December-02, 12:49 AM

Whats with your power supply? I don't understand how you MADE that? Did you like sqish it or something, hehe. No offense but it does look pretty squished to me.

vladimir · 03-December-02, 01:02 AM

well i guess i cant say i entirely made it but i moded 2 powersupplyes, and then combined them together in one case that i also made

though by modding the powersuply i basically had to remake it

flounder405 · 03-December-02, 01:10 AM

Clown you are slowly becoming my hero....i have been racking my brains out to figure out something like what you are doing (but still have some planning to do so its going to be awhile) I might pm you later about this if you dont mind.Real curious to see what this sucka is going to look like when its all done.

vladimir · 03-December-02, 01:20 AM

lol i have this awsome case mod for it planned too

and no u can pm me and spill it all out LOL

BigAkita · 03-December-02, 01:32 AM

Clown, you never cease to amaze me. You make a bunch of posts that make you sound like a crazed lunatic, then you go and write an article on LCDs or post pics of a very difficult mod. I bet you are a lot of fun at parties.

HoJo · 03-December-02, 02:13 AM

Are you going to connect it to your Apple?

vladimir · 03-December-02, 06:43 PM

Quote:


	Originally posted by bigakita Clown, you never cease to amaze me. You make a bunch of posts that make you sound like a crazed lunatic, then you go and write an article on LCDs or post pics of a very difficult mod. I bet you are a lot of fun at parties.

coming from a person like u, it means alot tnx ba

vladimir · 30-December-02, 07:35 PM

UPDATE: well i finally finished making a bazel...well not totally (still have to cut holes for switches and stuff) but all the main stuff is done

yah i know still a bit gheto, but once painted hopefully it will look nice

those screws r holding the swich activity leds and stuff

FunkyFresh · 30-December-02, 08:18 PM

Now this is what modding's all about! Just hauling off and making something useful because well, you could use it and hey, it's cool besides. Can't wait to see the final pix!

(BTW, this setup would be perfect for a firewall, too, if you ever wanted or needed that.)

chiquita · 30-December-02, 08:59 PM

Looking good Clown. Keep up the good work.

vladimir · 30-December-02, 09:39 PM

firewall, switch, router, lan server, server u name it

tnx guys

03-December-02, 12:17 AM		#1 (permalink)
vladimir Pimp PHP Pro	what im working on well folks heres sum preview of what i was working on these past weeks its gonna be a 15 port switch, and a router, and server in one box the server is a p3 450 @ 503 mhz wit 256 ram, raid 8gb hdds, and a dually ethernet card....not that great, but can serve any game thats out there here are sum pics its still much work in progress yesturday i finished making the powersupply for this beast too, so its goin along pretty good Attached Thumbnails

03-December-02, 12:19 AM		#2 (permalink)
vladimir Pimp PHP Pro	see mobo just slides out of the case and theres the powersupply Attached Thumbnails

03-December-02, 12:26 AM		#4 (permalink)
vladimir Pimp PHP Pro	nice sharp pic on the switch ports Attached Thumbnails

03-December-02, 12:35 AM		#5 (permalink)
vladimir Pimp PHP Pro	, Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-December-02, 12:26 AM		#3 (permalink)
flounder405 The Mack Daddy	Damn Clown were you that excited to post this that you didnt finish the apple you were eating? looks cool you make that mobo tray hindged? Just a little confused on how it all works (the mobo tray)

03-December-02, 12:39 AM		#6 (permalink)
vladimir Pimp PHP Pro	ok this thing uptop shows which swich ports are in use, then power, and modes of switch..and those screws are actualy buttons @ flounder its quite simple, to the bottom i bolted a 90 degree bracket like l shaped drilled holes thorough there, and then made a frame for the mobo, and attached it to those L shaped brackets on the bottom of the case

03-December-02, 12:49 AM		#7 (permalink)
chiquita Banned	Whats with your power supply? I don't understand how you MADE that? Did you like sqish it or something, hehe. No offense but it does look pretty squished to me.

03-December-02, 01:02 AM		#8 (permalink)
vladimir Pimp PHP Pro	well i guess i cant say i entirely made it but i moded 2 powersupplyes, and then combined them together in one case that i also made though by modding the powersuply i basically had to remake it

03-December-02, 01:10 AM		#9 (permalink)
flounder405 The Mack Daddy	Clown you are slowly becoming my hero....i have been racking my brains out to figure out something like what you are doing (but still have some planning to do so its going to be awhile) I might pm you later about this if you dont mind.Real curious to see what this sucka is going to look like when its all done.

03-December-02, 01:20 AM		#10 (permalink)
vladimir Pimp PHP Pro	lol i have this awsome case mod for it planned too and no u can pm me and spill it all out LOL

03-December-02, 01:32 AM		#11 (permalink)
BigAkita n00b-ass reviewer	Clown, you never cease to amaze me. You make a bunch of posts that make you sound like a crazed lunatic, then you go and write an article on LCDs or post pics of a very difficult mod. I bet you are a lot of fun at parties.

03-December-02, 02:13 AM		#12 (permalink)
HoJo Review Pimp, but still Jo's Ho	Are you going to connect it to your Apple?

30-December-02, 07:35 PM		#14 (permalink)
vladimir Pimp PHP Pro	UPDATE: well i finally finished making a bazel...well not totally (still have to cut holes for switches and stuff) but all the main stuff is done yah i know still a bit gheto, but once painted hopefully it will look nice those screws r holding the swich activity leds and stuff

30-December-02, 08:18 PM		#15 (permalink)
FunkyFresh 'Da Doctor of Funk	Now this is what modding's all about! Just hauling off and making something useful because well, you could use it and hey, it's cool besides. Can't wait to see the final pix! (BTW, this setup would be perfect for a firewall, too, if you ever wanted or needed that.)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Web browsers aren't working	bananaretarded	Other PC Problem / Help	3	15-November-05 10:33 AM
My Sig isnt working!	Pod_Man	Team PimpRig (F@H and more)	7	13-October-05 08:59 PM
not working omg!	makkunbakkun	Motherboards / CPUs	21	15-March-03 04:33 PM
Here's what I have been working on...	Fantazmic2	Anything Goes	23	13-November-02 01:22 AM

30-December-02, 08:59 PM		#16 (permalink)
chiquita Banned	Looking good Clown. Keep up the good work.

30-December-02, 09:39 PM		#17 (permalink)
vladimir Pimp PHP Pro	firewall, switch, router, lan server, server u name it tnx guys