Hellmouth is in a sorry state . .all gutted. Well, the reason is the phase change unit was being overhauled by Team Next Gen. They completely rebuild it and regassed it to make it man handle extreme quad core cpus. . .We also had a couple guys from Argentina custom fab a pimped evap head and enclosure (clear acrylic). I am going to ditch the crappy primoflex tubing and go all tygon . . .Choaserver from PDXLAN already competely resleeved the psu in all black . . .I am getting all hex black screws and I will be making a very awesome water feature and will also make a fiber optic feature as well . . .this project for PDXLAN 10.5 . . .

Rebuilt phase:


This is the new resevoir (had Tap Plastic fab it) I need to tap the hole in teh bottom. The inlet will be two small tubes that come in from the back, thru the heart and thru the stake which will pierce the heart. I will drill holes thru the stake for the tubes so the fluid look like it is spurting from where the stake pierces the heart. The heart will be in the upper chamber with the stake piercing the front to the chamber. The blood will spurt in the small that is between the top chamber and the front (the top of the L-shaped piece of plastic). The heart will stay dry (which is good because it is electrical and pumps.






Making more progress . . .getting the mobo ready to install . . .protecting against condensation. Tubing is just for layout purposes . . .will likely shorten the runs as muc has possible.



Probably will not use the top piece of neroprene as the evap head has some around it.