Guide: Basic Intro Guide to Brazing

GlitterKill · 06-July-05, 07:32 PM

Zennzzo has a new quick guide up on the process of brazing. Very informative quick guide worth a read for those interested in the construction of phase change systems.

Check it out here.

Wellmont · 06-July-05, 08:16 PM

wow...um this one goes beyond my abilities...can I braze with my dremel?

CyberTech · 06-July-05, 09:44 PM

Awsome bit of information there. That's what is cool about PR. Everyone has different skills they are willing to share for the betterment of the community.

TORN · 07-July-05, 12:41 AM

Ditto what CyberTech said about PR being about different skills. This is [at the moment

] beyond what I'm looking to do right now, but it was interesting to read. Props on the sweet review.

Nerdz · 07-July-05, 01:24 AM

Now I know how to fix pipes if I have a leak in my house. HEY! this can be used to weld stuff too!

subdismal · 07-July-05, 01:53 AM

Neat little guide. Not really worth much to me currently, since I don't delve into phase changing just yet. However, it's still nice to read this to get some general information, quick overview, etc.

Props to Zenn!

Sparky · 07-July-05, 05:13 AM

I thought it was very well written and not too directly overly confusing to the person that has never brazed before. Also including the bit about the nitrogen line was a good idea because i can see someone jumping right in and destroying their system due to not being prepared.....but hey if your a modder of any kind your gonna kill some stuff along the way. Friendly fire happens.

ZENNZZO · 12-July-05, 10:56 PM

with the right tools any job can be made easy if you practice...

When I got back home a friend of mine gave me this old VICTOR oxy/acyt set..it'll make brazing even easier and cheaper due to the tank size...this is a "B" size setup-
with 3/8ths inch mixing tube (torch handle)

carbongraphite · 13-July-05, 12:22 AM

do you braze brass? and zenn, about how much does acetylene cost?

06-July-05, 07:32 PM		#1 (permalink)
GlitterKill Pimp-of-all-Pimps	Basic Intro Guide to Brazing Zennzzo has a new quick guide up on the process of brazing. Very informative quick guide worth a read for those interested in the construction of phase change systems. Check it out here.

12-July-05, 10:56 PM		#8 (permalink)
ZENNZZO Direct Cool Hoe	with the right tools any job can be made easy if you practice... When I got back home a friend of mine gave me this old VICTOR oxy/acyt set..it'll make brazing even easier and cheaper due to the tank size...this is a "B" size setup- with 3/8ths inch mixing tube (torch handle) Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Affiliate Guide: Desktop Graphics Card Comparison Guide Rev. 11.9	hartigan	PC Apex Web News	0	17-March-07 10:13 AM
Affiliate Guide: Budget OC System Guide	THRiLL KiLL	PC Apex Web News	0	31-August-06 03:48 PM
Affiliate Guide: Intel Core 2 Duo E6600 overclocking guide	THRiLL KiLL	PC Apex Web News	0	28-August-06 03:31 PM
Affiliate Guide: Hard Drive installation and troubleshooting guide @ IANAG	FeRaL	PC Apex Web News	0	02-April-04 06:14 PM
Basic Soldering Guide@EPE Online.com	scapegoat	PC Apex Web News	0	17-October-02 04:50 AM

06-July-05, 08:16 PM		#2 (permalink)
Wellmont Apex Master Tech Apprentice	wow...um this one goes beyond my abilities...can I braze with my dremel?

06-July-05, 09:44 PM		#3 (permalink)
CyberTech I need to Confirm with email	Awsome bit of information there. That's what is cool about PR. Everyone has different skills they are willing to share for the betterment of the community.

07-July-05, 12:41 AM		#4 (permalink)
TORN Apex Advanced Techie	Ditto what CyberTech said about PR being about different skills. This is [at the moment ] beyond what I'm looking to do right now, but it was interesting to read. Props on the sweet review.

07-July-05, 01:24 AM		#5 (permalink)
Nerdz Sir Knight of Spamalot	Now I know how to fix pipes if I have a leak in my house. HEY! this can be used to weld stuff too!

07-July-05, 01:53 AM		#6 (permalink)
subdismal Apex Tech Demi-God	Neat little guide. Not really worth much to me currently, since I don't delve into phase changing just yet. However, it's still nice to read this to get some general information, quick overview, etc. Props to Zenn!

07-July-05, 05:13 AM		#7 (permalink)
Sparky Apex Tech God	I thought it was very well written and not too directly overly confusing to the person that has never brazed before. Also including the bit about the nitrogen line was a good idea because i can see someone jumping right in and destroying their system due to not being prepared.....but hey if your a modder of any kind your gonna kill some stuff along the way. Friendly fire happens.

13-July-05, 12:22 AM		#9 (permalink)
carbongraphite Pow - Hoe playa	do you braze brass? and zenn, about how much does acetylene cost?