Craftsman Powder Coat System

THRASHER2 · 28-May-06, 06:26 PM

Craftsman Powder Coat System

Quote:


	Apply a durable, protective coating to any metal component quickly, easily and safely. Coating is electrostatically applied, then just place coated item in a 400 deg. oven to cure and you're done. Fast and environmentally friendly, coating is chip and chemical resistant. System features internal air generation (no compressor needed.) Variable speed switch. Sears ExclusivePowder-coating can be applied to iron, steel, aluminum, stainless steel, titanium, and also chrome-plated surfaces. The Craftsman Powder Coat system will allow you to obtain professional results at home at a fraction of the cost. Superior to aerosol and other liquid coatings in flexibility, corrosion, and chemical resistance. Over spray is simply swept up and disposed of in household refuse. The system includes the accessories, application gun, and detailed instructions. Powder-coating, like other high-quality coatings, can only be applied over a bare metal surface. Removing corrosion and old coatings can be easily accomplished with abrasive paper, wire brush, liquid paint stripper, or abrasive blasting. Once removed simply wipe with acetone or paint thinner, allow to dry, and coat. The only components you will need are an object to coat and an extra toaster oven or non food prep conventional oven. Benefits of powder-coating: Ease of application Environmentally friendly Fast and easy to clean up No fumes or overspray No harmful solvents or toxins Very quick 10-30 minute cure time No CFCs EPA approved process

Linky
Has anybody used this SWEEET painting Item?

phin3s · 30-May-06, 12:34 PM

i havent used it, but i wish i had the money to try it out.... it would be a nice thing to have around if it works good

me_john85 · 30-May-06, 12:39 PM

i saw a review of it a couple months ago, it was a good product just what ever you are planning to powdercoad has to be able to fit in your oven cause you still have to bake it on. ill see if i can find it

BigJunk93YJ · 30-May-06, 05:50 PM

i've seen DIY systems like this before (not one that you don't need a compressor for though

) Eastwood has them here for $125. i've seen them used on Hot Rod TV or Trucks or one of those Spike TV Powerblock shows. one thing they all said was not to use your kitchen oven, use one that you don't cook in anymore. i dunno if it was because of fumes or something else.

musclecars&computers · 30-May-06, 05:55 PM

Post an ad on craigslist for a free older stove....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Craftsman Digital Multimeter with AC Voltage Detector--$15	eascarface	Deals and Steals	0	30-October-06 07:04 AM
clear coat?	agent_M	Other Modding	6	18-June-05 01:52 PM
Craftsman 117 pc. Mechanics Tool Set $90	THRASHER2	Deals and Steals	0	09-June-05 07:24 PM
FS: Craftsman Dremel Clone + Extras	GrandpaNoob72	Trading Post	14	01-December-04 06:22 PM
Pearl Coat	mopery	Painting	4	23-December-03 05:35 PM

30-May-06, 12:34 PM		#2 (permalink)
phin3s Re-Fu3ling Beyotch	i havent used it, but i wish i had the money to try it out.... it would be a nice thing to have around if it works good

30-May-06, 12:39 PM		#3 (permalink)
me_john85 Camp Pen-Hoe-tan's Hoe	i saw a review of it a couple months ago, it was a good product just what ever you are planning to powdercoad has to be able to fit in your oven cause you still have to bake it on. ill see if i can find it

30-May-06, 05:50 PM		#4 (permalink)
BigJunk93YJ Apex Advanced Techie	i've seen DIY systems like this before (not one that you don't need a compressor for though ) Eastwood has them here for $125. i've seen them used on Hot Rod TV or Trucks or one of those Spike TV Powerblock shows. one thing they all said was not to use your kitchen oven, use one that you don't cook in anymore. i dunno if it was because of fumes or something else.

30-May-06, 05:55 PM		#5 (permalink)
musclecars&computers Apex Tech Demi-God	Post an ad on craigslist for a free older stove....