how do you setup a computer for a widescreen display?

peppers · 25-November-07, 06:40 AM

I cannot seem to figure this out, how do you setup a XP computer so it will display correctley on a widescreen TV?

I just got me one I am useing as a monitor. I would like to be able to use widescreen mode with everything in the correct aspect ratio

edit:I now see this topic belongs in a differient section sorry bout that

Seyeklopz · 25-November-07, 06:53 AM

You need to create a custom windows resolution at the native progressive resolution of your tv. 1920x1080? 1280x720?

There are a few methods.

Easiest.. nvidia
Custom Resolutions

Tutorial: Forcing Custom Resolution in Windows - MP3Car.com

How to Configure Custom Resolutions in Windows at FreakyGaming

Custom Resolution Guide for 1080i HDTV-HTPC-POWERSTRIP-RADEON - AVS Forum

peppers · 25-November-07, 07:04 AM

The box says 1366X768, but the manual recommends 1360x768.Thank you for the Tutorials.

peppers · 25-November-07, 10:11 AM

I had to update my drivers but Prowerstrip did work almost

now I am ending up with the same white dots flickering at the very top of my screen as I had when the refresh rate was set too high although its set to 60hz

I am useing a intel 82845G graphics controller embbeded im my motherboard with these setting in powerstrip, what is wrong?

Seyeklopz · 25-November-07, 10:16 AM

Which TV do you have?

4x0n · 25-November-07, 10:20 AM

It's a shot in the dark but try setting the horizontal refresh to 60 as well.

peppers · 25-November-07, 10:28 AM

^
that is not possiple without setting the vertical to 75 and is also beond the ability of my graphics controller

the TV is the brand Envision L32W761 it is actualy a 32 in screen rater than what I said before witch was a typo

edit: disapleing "Dynamic Contrast" feature on the TV seems to have done the trick

BeetleMan · 25-November-07, 11:31 AM

1366x768 is a 16:9 ratio, did you try that? And also try to set ratio to 16:9, instead of "any"...

EDIT: Didn't see ya got it solved.....

Seyeklopz · 25-November-07, 11:49 AM

Here's the spec sheet..

http://www.envisiondisplay.com/produ...w761-specs.pdf

Graphic (PC) Input Signal Input Analog RGB (Dsub)
H-Frequency 31 ~ 60KHz
V-Frequency 50 ~ 75Hz
Pixel Frequency 110MHz [pixel clock?]
Plug & Play DDC2B
Maximum Resolution 1360x768x60Hz

Chrome_Rust · 25-November-07, 11:52 AM

At work we have a Olevia 37" LCD TV, it will do 2 res's that is scales properly, 1280 x 720 @ 50hz, or 1920 x 1080 @ 50hz.... try one of those. may work for ya, but the 50hz refresh is what through me....

Wafflesomd · 25-November-07, 12:26 PM

If you have an nvidia card, I think they have an option to set the monitor as an HDTV.

I don't if that would work.

25-November-07, 06:40 AM		#1 (permalink)
peppers Apex Techie I	how do you setup a computer for a widescreen display? I cannot seem to figure this out, how do you setup a XP computer so it will display correctley on a widescreen TV? I just got me one I am useing as a monitor. I would like to be able to use widescreen mode with everything in the correct aspect ratio edit:I now see this topic belongs in a differient section sorry bout that Last edited by peppers; 25-November-07 at 10:25 AM..

25-November-07, 06:53 AM		#2 (permalink)
Seyeklopz Apex Tech Fanatic Supreme	Re: how do you setup a computer for a widescreen display? You need to create a custom windows resolution at the native progressive resolution of your tv. 1920x1080? 1280x720? There are a few methods. Easiest.. nvidia Custom Resolutions Tutorial: Forcing Custom Resolution in Windows - MP3Car.com How to Configure Custom Resolutions in Windows at FreakyGaming Custom Resolution Guide for 1080i HDTV-HTPC-POWERSTRIP-RADEON - AVS Forum Last edited by Seyeklopz; 25-November-07 at 08:14 AM..

25-November-07, 07:04 AM		#3 (permalink)
peppers Apex Techie I	Re: how do you setup a computer for a widescreen display? The box says 1366X768, but the manual recommends 1360x768.Thank you for the Tutorials. Last edited by peppers; 25-November-07 at 10:26 AM..

25-November-07, 10:11 AM		#4 (permalink)
peppers Apex Techie I	Re: how do you setup a computer for a widescreen display? I had to update my drivers but Prowerstrip did work almost now I am ending up with the same white dots flickering at the very top of my screen as I had when the refresh rate was set too high although its set to 60hz I am useing a intel 82845G graphics controller embbeded im my motherboard with these setting in powerstrip, what is wrong?

25-November-07, 10:16 AM		#5 (permalink)
Seyeklopz Apex Tech Fanatic Supreme	Re: how do you setup a computer for a widescreen display? Which TV do you have?

25-November-07, 10:20 AM		#6 (permalink)
4x0n Proud New Daddy	Re: how do you setup a computer for a widescreen display? It's a shot in the dark but try setting the horizontal refresh to 60 as well.

25-November-07, 10:28 AM		#7 (permalink)
peppers Apex Techie I	Re: how do you setup a computer for a widescreen display? ^ that is not possiple without setting the vertical to 75 and is also beond the ability of my graphics controller the TV is the brand Envision L32W761 it is actualy a 32 in screen rater than what I said before witch was a typo edit: disapleing "Dynamic Contrast" feature on the TV seems to have done the trick Last edited by peppers; 25-November-07 at 10:55 AM..

25-November-07, 11:31 AM		#8 (permalink)
BeetleMan PCApex Corr-Hoe-spondent	Re: how do you setup a computer for a widescreen display? 1366x768 is a 16:9 ratio, did you try that? And also try to set ratio to 16:9, instead of "any"... EDIT: Didn't see ya got it solved.....

25-November-07, 11:49 AM		#9 (permalink)
Seyeklopz Apex Tech Fanatic Supreme	Re: how do you setup a computer for a widescreen display? Here's the spec sheet.. http://www.envisiondisplay.com/produ...w761-specs.pdf Graphic (PC) Input Signal Input Analog RGB (Dsub) H-Frequency 31 ~ 60KHz V-Frequency 50 ~ 75Hz Pixel Frequency 110MHz [pixel clock?] Plug & Play DDC2B Maximum Resolution 1360x768x60Hz

25-November-07, 11:52 AM		#10 (permalink)
Chrome_Rust Apex Tech God	Re: how do you setup a computer for a widescreen display? At work we have a Olevia 37" LCD TV, it will do 2 res's that is scales properly, 1280 x 720 @ 50hz, or 1920 x 1080 @ 50hz.... try one of those. may work for ya, but the 50hz refresh is what through me....

25-November-07, 12:26 PM		#11 (permalink)
Wafflesomd Banned	Re: how do you setup a computer for a widescreen display? If you have an nvidia card, I think they have an option to set the monitor as an HDTV. I don't if that would work.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Register // iPod Nano revamp to see widescreen display?	Gizmo	The Register RSS	0	20-August-07 02:30 AM
The Register // BenQ unwraps 22in widescreen display	Gizmo	The Register RSS	0	12-September-06 11:01 AM
The Register // BenQ unwraps 22in widescreen display	Gizmo	The Register RSS	0	11-September-06 07:01 PM
GeForce 6800 Dual Display setup	jaap74	Display Hardware	7	21-April-06 08:28 PM
DELL 20" Widescreen Display (2005FPW) for ~$400	badmonkey	Deals and Steals	13	20-May-05 09:03 PM

LinkBacks (?) LinkBack to this Thread: http://www.forumapex.com/other_pc_problem_help/118632-how_do_you_setup_a_computer_for_a_widescreen_display.html
Posted By	For	Type	Date
Envision L32W761 :: BoardReader	This thread	Refback	06-December-07 10:54 PM
"Graphics controller" - topic profile :: BoardReader	This thread	Refback	01-December-07 08:24 PM
Envision L32W761 :: BoardReader	This thread	Refback	30-November-07 09:06 PM
Problem: Blogs, Photos, Videos and more on Technorati	This thread	Refback	25-November-07 02:43 PM