Small Molex Connectors/Pins

Sportbilly · 24-September-03, 09:28 PM

Ok, this one's holding me up here.

I need the part numbers or the names of the small molex connectors (the one's for floppy drives) and for the pins which reside within. Trying to search the Molex site is a little frustrating to say the least.

If anybody happens to have discovered this info before, I'd really appreciate a hookup

Once I get these and my sleeving, I can finish off this case and actually post a modded case for once!

me_john85 · 24-September-03, 09:32 PM

i think there called "berg" connecters try that, ill to a google in a second

Sportbilly · 24-September-03, 10:11 PM

Quote:


	Originally posted by me_john85 i think there called "berg" connecters try that, ill to a google in a second

You the man!!

Found the company responsible, now all I need is a vendor LOL

Thanks MeJohn

me_john85 · 24-September-03, 10:13 PM

yeah all i found was that too, im still looking

what was that electronics store that has great stuff online?

Sportbilly · 24-September-03, 10:26 PM

Uh, which one? LOL

I use All Electronics

Sportbilly · 24-September-03, 10:33 PM

Y'know what, I found some 4-pin headers and connectors here, if I clip off the polarity nubs, I can use these... (uses standard fan plug pins)

Now at least I know what they're called, even if I can't order any LOL

me_john85 · 24-September-03, 10:34 PM

http://www.allelectronics.com/cgi-bi...244&type=store

closest iv found

putwig · 25-September-03, 05:10 AM

I would just harvest on off an old PSU. Hate to order online and pay shipping for a $0.10 part!

ZENNZZO · 25-September-03, 09:34 AM

What is it you need?
Post a pic(s)I've got a grip of that stuff, Maybe save ya some money....

Hurt Me Plenty · 25-September-03, 10:00 AM

uhm, personally I just cannibalize whatever I need off dead parts.

A dead floppy would have the PCB connector for the Berg connector. And as Putwig said, pull a berg connector off a PSU.

I got a free 8 mhz processor off a old dead HP, imagine that

, Printer. And parts for a power supply off the same printer.

Sportbilly · 25-September-03, 06:09 PM

That'd work, but I need the wires to be uh, slim, no room here for extending wires if they're too short... And the only salvageable Berg's (see, isn't it nice how that rolls off the tongue...) I have here are 20 AWG, and I need 22 or thinner...

I'd just buy the little crimp pins, so I can rewire 'em, but there's probably only 2 guys in purchasing at some major supply house who have even the faintest idea what part number they are...

I'll just modify these connectors (I did in fact order them from AllElectronics a looooong time ago as it happens)...

FYI I found a source for the little crimp pins you find in fan molex connectors (I hope it's right) I'll confirm once they arrive if anybody is interested...

EDIT: Thanks for the help guys! And for the offer Zenn...

24-September-03, 09:28 PM		#1 (permalink)
Sportbilly Apex Tech Maniac	Small Molex Connectors/Pins Ok, this one's holding me up here. I need the part numbers or the names of the small molex connectors (the one's for floppy drives) and for the pins which reside within. Trying to search the Molex site is a little frustrating to say the least. If anybody happens to have discovered this info before, I'd really appreciate a hookup Once I get these and my sleeving, I can finish off this case and actually post a modded case for once!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UV Molex connectors	swimsfast99	Case Modding	5	31-July-06 07:40 AM
Female Molex PINs	Fahye	Other PC Problem / Help	3	01-October-05 04:46 PM
Do-it-youself Molex connectors?	LwrS10	Other Modding	6	19-August-05 09:38 PM
Molex pins?	slick	Case Modding	8	27-February-04 03:37 AM
Right Angle Molex Connectors	Serideru	Case Modding	7	28-April-03 01:48 AM

24-September-03, 09:32 PM		#2 (permalink)
me_john85 Camp Pen-Hoe-tan's Hoe	i think there called "berg" connecters try that, ill to a google in a second

24-September-03, 10:13 PM		#4 (permalink)
me_john85 Camp Pen-Hoe-tan's Hoe	yeah all i found was that too, im still looking what was that electronics store that has great stuff online?

24-September-03, 10:26 PM		#5 (permalink)
Sportbilly Apex Tech Maniac	Uh, which one? LOL I use All Electronics

24-September-03, 10:33 PM		#6 (permalink)
Sportbilly Apex Tech Maniac	Y'know what, I found some 4-pin headers and connectors here, if I clip off the polarity nubs, I can use these... (uses standard fan plug pins) Now at least I know what they're called, even if I can't order any LOL

24-September-03, 10:34 PM		#7 (permalink)
me_john85 Camp Pen-Hoe-tan's Hoe	http://www.allelectronics.com/cgi-bi...244&type=store closest iv found

25-September-03, 05:10 AM		#8 (permalink)
putwig Dr. Hydro Pimp	I would just harvest on off an old PSU. Hate to order online and pay shipping for a $0.10 part!

25-September-03, 09:34 AM		#9 (permalink)
ZENNZZO Direct Cool Hoe	What is it you need? Post a pic(s)I've got a grip of that stuff, Maybe save ya some money....

25-September-03, 10:00 AM		#10 (permalink)
Hurt Me Plenty Apex Master Tech	uhm, personally I just cannibalize whatever I need off dead parts. A dead floppy would have the PCB connector for the Berg connector. And as Putwig said, pull a berg connector off a PSU. I got a free 8 mhz processor off a old dead HP, imagine that , Printer. And parts for a power supply off the same printer.

25-September-03, 06:09 PM		#11 (permalink)
Sportbilly Apex Tech Maniac	That'd work, but I need the wires to be uh, slim, no room here for extending wires if they're too short... And the only salvageable Berg's (see, isn't it nice how that rolls off the tongue...) I have here are 20 AWG, and I need 22 or thinner... I'd just buy the little crimp pins, so I can rewire 'em, but there's probably only 2 guys in purchasing at some major supply house who have even the faintest idea what part number they are... I'll just modify these connectors (I did in fact order them from AllElectronics a looooong time ago as it happens)... FYI I found a source for the little crimp pins you find in fan molex connectors (I hope it's right) I'll confirm once they arrive if anybody is interested... EDIT: Thanks for the help guys! And for the offer Zenn...