Raidmax Sagitta LED's

xplod · 09-November-07, 06:47 PM

I have the Raidmax Sagitta Case and recently the 1 of the six front Bezel LED's at the front went out and i would just like to know what voltage the front LED's are so i can change them.
Here are some specs of the case Welcome to Raidmax!

Nerdz · 10-November-07, 06:33 PM

LEDs dont burn out. The LED could just be loose if all the other ones are lighting up.

But to answer your post, Blue LEDs are around 3.3 to 3.5V. All blue LEDs are the same voltage, so any Blue LED will work.

Twizted · 10-November-07, 08:13 PM

LED's do burn out... If there was a defect in the LED or what ever it is possible that it did burn out... although highly unlikely..

I would suggest either hitting the solder points with a hot gun (have fixed seemingly failed LED's before like this) you basically just want to reflow the solder... if that does not work then simply replace the LED... They are cheap enough... ( *!cough!* DragonModz Shop *!cough!*)

Also I have cases come with bad resistors before where I had to replace the resistor to fix a lighting issue... So check that as well.. in fact you might want to do this first... make sure you have voltage making it to the LED...

Good luck...

Seyeklopz · 10-November-07, 09:14 PM

I've seen LEDs installed backwards. Pretty rare though.

xplod · 10-November-07, 09:16 PM

The LED's in the front bezel are 5mm so if they were these DragonModz Shop what resistors will i need?(I'm
new to these things).

xplod · 10-November-07, 10:34 PM

I got a color code program since im a n00b at things like these color from the original resistors are BROWN RED BLACK GOLD and it sais 12 ohm on the program i used was download ccc but dragon modz doesn't have 12ohm resistors or is the program wrong

09-November-07, 06:47 PM		#1 (permalink)
xplod Apex Advanced Techie	Raidmax Sagitta LED's I have the Raidmax Sagitta Case and recently the 1 of the six front Bezel LED's at the front went out and i would just like to know what voltage the front LED's are so i can change them. Here are some specs of the case Welcome to Raidmax!

10-November-07, 06:33 PM		#2 (permalink)
Nerdz Sir Knight of Spamalot	Re: Raidmax Sagitta LED's LEDs dont burn out. The LED could just be loose if all the other ones are lighting up. But to answer your post, Blue LEDs are around 3.3 to 3.5V. All blue LEDs are the same voltage, so any Blue LED will work.

10-November-07, 08:13 PM		#3 (permalink)
Twizted Editor/Reviewer/LED Guru	Re: Raidmax Sagitta LED's LED's do burn out... If there was a defect in the LED or what ever it is possible that it did burn out... although highly unlikely.. I would suggest either hitting the solder points with a hot gun (have fixed seemingly failed LED's before like this) you basically just want to reflow the solder... if that does not work then simply replace the LED... They are cheap enough... ( !cough! DragonModz Shop !cough!) Also I have cases come with bad resistors before where I had to replace the resistor to fix a lighting issue... So check that as well.. in fact you might want to do this first... make sure you have voltage making it to the LED... Good luck...

10-November-07, 09:14 PM		#4 (permalink)
Seyeklopz Apex Tech Fanatic Supreme	Re: Raidmax Sagitta LED's I've seen LEDs installed backwards. Pretty rare though.

10-November-07, 09:16 PM		#5 (permalink)
xplod Apex Advanced Techie	Re: Raidmax Sagitta LED's The LED's in the front bezel are 5mm so if they were these DragonModz Shop what resistors will i need?(I'm new to these things). Last edited by xplod; 10-November-07 at 09:22 PM..

10-November-07, 10:34 PM		#6 (permalink)
xplod Apex Advanced Techie	Re: Raidmax Sagitta LED's I got a color code program since im a n00b at things like these color from the original resistors are BROWN RED BLACK GOLD and it sais 12 ohm on the program i used was download ccc but dragon modz doesn't have 12ohm resistors or is the program wrong

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RaidMax Storm 847	old_skool_modder	Case Modding	0	17-July-06 05:03 AM
Pic of my RaidMax Skull Mod	athlonxpstuff	Case Modding	18	29-July-05 08:09 AM
raidmax 868 modding	phin3s	Case Modding	8	04-December-04 12:34 PM
Raidtronics Raidmax ATX-268WU & RaidMax 400W PSU	Red02	PC Apex Web News	0	26-April-03 11:59 PM