need help finding a datasheet for a sharp lcd module

hellzknight · 06-November-05, 02:14 PM

i need help finding the datasheet for lcd module it is a sharp LM162 any help is appreciated

HigHTecHReDNecK · 06-November-05, 02:39 PM

Quote:

Originally Posted by hellzknight


	i need help finding the datasheet for lcd module it is a sharp LM162 any help is appreciated

Here's a couple links i found for ya Bubba

link to a load of LCD links
http://www.globalspec.com/industrial...d_module_sharp

link to prossesor board & LCD interface ???
http://shawnd.dyndns.org/Project/report.pdf

link to 9 Sharp pdf files
http://search.sharp.co.jp/cgi-bin/in...bin/result.cgi

if those dont work, hit this post and i can do some more diggin , i love huntin fer stuff

hellzknight · 06-November-05, 03:34 PM

Quote:

Originally Posted by HigHTecHReDNecK


	Here's a couple links i found for ya Bubba link to a load of LCD links http://www.globalspec.com/industrial...d_module_sharp link to prossesor board & LCD interface ??? http://shawnd.dyndns.org/Project/report.pdf link to 9 Sharp pdf files http://search.sharp.co.jp/cgi-bin/in...bin/result.cgi if those dont work, hit this post and i can do some more diggin , i love huntin fer stuff

last one didnt work, iff you can find a diogram it would be really helpful

hellzknight · 11-November-05, 01:28 PM

i need the pin outs for the screen its a sharp lm162 or anyone can tell me how i find them out by hand ?

Nerdz · 11-November-05, 02:57 PM

Is it From a laptop?Or is it the LCD module Like 16x2, 40x2 etc..?

hellzknight · 12-November-05, 01:44 PM

Quote:

Originally Posted by Nerdz


	Is it From a laptop?Or is it the LCD module Like 16x2, 40x2 etc..?

oh sorry should of menstion that its a lcd module its 16x2

Nerdz · 12-November-05, 04:56 PM

Easy! Alright. Now Are there any numbers near the connectors? Is this thing backlighted? Can I have a pic of it to help?

MOST LCD's will have a number infront of the pins, but will only designate 2 or 4 Pins. If there is 1 Row of pins there will be a 1 at the first pin, and a 16 at the last pin. If there are 2 rows of pins, the first row will have a one, the end of that row will have an 8, the next row will begin with a 7, and the last pin will be 16.

http://guides.pcapex.com/modding/diy...ll_and_mod.php

This guide will help you hook it up to the parallel port. If you can provide a pic, I could help a bit more.

hellzknight · 13-November-05, 05:31 PM

Quote:

Originally Posted by Nerdz


	Easy! Alright. Now Are there any numbers near the connectors? Is this thing backlighted? Can I have a pic of it to help? MOST LCD's will have a number infront of the pins, but will only designate 2 or 4 Pins. If there is 1 Row of pins there will be a 1 at the first pin, and a 16 at the last pin. If there are 2 rows of pins, the first row will have a one, the end of that row will have an 8, the next row will begin with a 7, and the last pin will be 16. http://guides.pcapex.com/modding/diy...ll_and_mod.php This guide will help you hook it up to the parallel port. If you can provide a pic, I could help a bit more.

not sure if it has a back light it was removed form i dont know what :/ it has two numvers tho one is lm162 which is by the connectors and one by one of the chips which is f10008cp and also one by two copper holes labeled hcn 24v

Nerdz · 13-November-05, 06:20 PM

Its 16x2 correct?

Does it look like this one?

OR does it look like something from a laptop or gameboy?

hellzknight · 17-November-05, 03:31 PM

Quote:

Originally Posted by Nerdz


	Its 16x2 correct? Does it look like this one? OR does it look like something from a laptop or gameboy?

yes but it doesnt have that chip to the left

Nerdz · 17-November-05, 03:40 PM

Those are just connectors

. Yours may have pads (little copper pads) with the numbers next to them.

But see how it says Pin 1 (you see a 1) and then pin 2? Thats what Im talking about, so yea you should be able to hook it up to the parallel port..

06-November-05, 02:14 PM		#1 (permalink)
hellzknight Apex Advanced Techie	need help finding a datasheet for a sharp lcd module i need help finding the datasheet for lcd module it is a sharp LM162 any help is appreciated

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sharp vs Samsung LCD TV	Stroked77	Deals and Steals	0	26-May-07 01:12 AM
What to do about sharp edges?	Duplo	Case Modding	6	12-March-06 01:53 PM
The Register // Sharp unshackles 65-inch LCD beast	Gizmo	The Register RSS	0	03-June-05 03:19 PM
Slashdot // New Sharp 3D Notebook Available with Linux	Gizmo	Slashdot RSS	0	22-March-05 01:17 PM
Slashdot // Bosses Keep Sharp Eye on Mobile Workers	Gizmo	Slashdot RSS	0	31-December-04 03:37 AM

11-November-05, 01:28 PM		#4 (permalink)
hellzknight Apex Advanced Techie	i need the pin outs for the screen its a sharp lm162 or anyone can tell me how i find them out by hand ?

11-November-05, 02:57 PM		#5 (permalink)
Nerdz Sir Knight of Spamalot	Is it From a laptop?Or is it the LCD module Like 16x2, 40x2 etc..?

12-November-05, 04:56 PM		#7 (permalink)
Nerdz Sir Knight of Spamalot	Easy! Alright. Now Are there any numbers near the connectors? Is this thing backlighted? Can I have a pic of it to help? MOST LCD's will have a number infront of the pins, but will only designate 2 or 4 Pins. If there is 1 Row of pins there will be a 1 at the first pin, and a 16 at the last pin. If there are 2 rows of pins, the first row will have a one, the end of that row will have an 8, the next row will begin with a 7, and the last pin will be 16. http://guides.pcapex.com/modding/diy...ll_and_mod.php This guide will help you hook it up to the parallel port. If you can provide a pic, I could help a bit more.

13-November-05, 06:20 PM		#9 (permalink)
Nerdz Sir Knight of Spamalot	Its 16x2 correct? Does it look like this one? OR does it look like something from a laptop or gameboy?

17-November-05, 03:40 PM		#11 (permalink)
Nerdz Sir Knight of Spamalot	Those are just connectors . Yours may have pads (little copper pads) with the numbers next to them. But see how it says Pin 1 (you see a 1) and then pin 2? Thats what Im talking about, so yea you should be able to hook it up to the parallel port..