4pin molex to 12v mobo

-=XPS=- · 23-October-04, 03:36 PM

what would the config be to make a 4pin molex plug work with the 12v mobo plug
? i used ti have a converter but i lost it so i was gunna ****om build one.

which wires would go where in relation to:

ab
cd
^

V= the clip on the socket

_____
/ e f g h\
-----------

e being oin the left side if the sloped corners are on top.

TekXoID · 23-October-04, 03:46 PM

Click Me.
Bla bla bla, ten character limit fufilled.

-=XPS=- · 23-October-04, 03:55 PM

ive got half an hour to get this comp built so i dun have tiem to buy one. cans umone tell me really quik the order?

TekXoID · 23-October-04, 04:08 PM

Man, you're thick, the link was for image reference.

Splice the yellow (12v) wire on a male molex connector into two wires, then wire
them to the two top holes on the P4 connector (the two nearest to the lock tab).

Lastly, run the two black (ground) wires into the lower two holes.

-=XPS=- · 23-October-04, 04:15 PM

ah ok thnx, i wasnt sure if they has just made the red one yellow

23-October-04, 03:36 PM		#1 (permalink)
-=XPS=- Banned	4pin molex to 12v mobo what would the config be to make a 4pin molex plug work with the 12v mobo plug ? i used ti have a converter but i lost it so i was gunna ****om build one. which wires would go where in relation to: ab cd ^ V= the clip on the socket _____ / e f g h\ ----------- e being oin the left side if the sloped corners are on top.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CoolerMaster Extreme Power 600W PSU 20+4PIN PCI+SLI Ready $56 AR with free shipping	PurpleDiamond	Deals and Steals	0	29-March-06 12:48 PM
Changing a 4pin molex to a 3pin on a fan	Fahye	Heatsinks / fans	2	08-October-05 11:12 PM
Run LED array off of a 4pin Floppy plug?	Dreyco	Case Modding	7	02-April-05 08:07 PM
Molex Pin tool	JimsZR2	Trading Post	2	19-July-04 11:52 AM
How big is your molex?	Grimm	Other Hardware	1	26-March-03 06:09 PM

23-October-04, 03:46 PM		#2 (permalink)
TekXoID Banned	Click Me. Bla bla bla, ten character limit fufilled.

23-October-04, 03:55 PM		#3 (permalink)
-=XPS=- Banned	ive got half an hour to get this comp built so i dun have tiem to buy one. cans umone tell me really quik the order?

23-October-04, 04:08 PM		#4 (permalink)
TekXoID Banned	Man, you're thick, the link was for image reference. Splice the yellow (12v) wire on a male molex connector into two wires, then wire them to the two top holes on the P4 connector (the two nearest to the lock tab). Lastly, run the two black (ground) wires into the lower two holes.

23-October-04, 04:15 PM		#5 (permalink)
-=XPS=- Banned	ah ok thnx, i wasnt sure if they has just made the red one yellow