What's a good 1U psu?

paige · 14-April-04, 07:04 PM

Hey pimps,
I'm working on my first mod in a long time and it's going into a tight space so I need to get a 1U psu. However the only 1U's i've ever come in contact with are seriously whinny! Dose anyone one know a good, small, fairly quite solution?
Thanks all!

Wordbiker · 14-April-04, 07:12 PM

What kind of mobo and CPU are you using it with? Shuttle uses a 1U 250W, and I've seen some pretty healthy rigs running on that. I saw a 300W 1U here: http://www.tmc-uk.com/Products/Power...y/power_1u.htm

paige · 14-April-04, 07:17 PM

I'll be running an Asus mATX, with an AMP XP2200 i think, it's just going to end up a BSD server really since i don't game and i do all my aplication type stuff on my powerbook. I'm not really worried too much about taxing a PSU, just something that won't be too noisy or cost me an arm and a leg.

Lunamods · 14-April-04, 07:22 PM

PC Power And Cooling would be your best bet for a 1U PSU although might be expensive.

Wordbiker · 14-April-04, 07:25 PM

I was running a Chaintech mATX nForce2 board with an XP1800+ OCed to 1900 MHz on a 150W eMachines PSU that was 6 years old....of course, the mobo eventually died, but I'm not absolutely sure it was due to lack of power since I never had any other symptoms. I checked 1U PSUs out and they get expensive quick! Sparkle seems to make a lot of them, and that's a great brand. I'd recommend going with at least a 250W. Better to have less load than take a chance of killing hardware...

Iateronmly · 14-April-04, 07:34 PM

Quote:

Originally Posted by Lunamods


	PC Power And Cooling would be your best bet for a 1U PSU although might be expensive.

They're 99 dollars for the 300 watt 1U units directly from them. When it comes to PC Power and Cooling it seems it's always cheaper to buy directly from them.

Lunamods · 14-April-04, 07:40 PM

Quote:

Originally Posted by Iateronmly


	They're 99 dollars for the 300 watt 1U units directly from them. When it comes to PC Power and Cooling it seems it's always cheaper to buy directly from them.

Thats actualy not a bad price for a kick A$$ PSU

paige · 14-April-04, 07:40 PM

wow, 99 bucks, that's a tad steep for my pockets.
is there any way to mod a "normal" psu to be smaller, or is it safe to leave it "unenclosed" in a sealed off case? does it need to be grounded some special way to turn on?
btw, you guys are all just as friendly as i remember from a year or so ago when i stopped frequenting PR.

Iateronmly · 14-April-04, 07:45 PM

I'd try to save up if I were you, 99 bucks is just a couple of plasma donations after all.

DuplexEmotions · 14-April-04, 07:46 PM

you can take the case off of it, just remember that if you touch the wrong leads or a component touches them someone/thing can/will end up fried.

paige · 14-April-04, 07:46 PM

thanks Laternomly, even that suggestion makes me woozy.

14-April-04, 07:04 PM		#1 (permalink)
paige Apex Advanced Techie	What's a good 1U psu? Hey pimps, I'm working on my first mod in a long time and it's going into a tight space so I need to get a 1U psu. However the only 1U's i've ever come in contact with are seriously whinny! Dose anyone one know a good, small, fairly quite solution? Thanks all!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Superbowl + Good Food = Good Times!	IronSerif	Daily Disturbance	12	31-January-07 10:21 AM
is this good enough	bikeboy541	AMD CPU/Motherboard OC	5	20-February-06 08:10 PM
Good Job. PR = good 'Puter Resource!	Skate_4_life!!!	Site Suggestions / Feedback	10	05-January-06 02:45 PM
Good LCD for GOOD Price	PoKey	Anything Goes	6	21-March-05 05:33 AM
Is this a good HS?	XtaSy	Heatsinks / fans	51	11-November-03 11:45 AM

14-April-04, 07:12 PM		#2 (permalink)
Wordbiker Apex Tech God	What kind of mobo and CPU are you using it with? Shuttle uses a 1U 250W, and I've seen some pretty healthy rigs running on that. I saw a 300W 1U here: http://www.tmc-uk.com/Products/Power...y/power_1u.htm

14-April-04, 07:17 PM		#3 (permalink)
paige Apex Advanced Techie	I'll be running an Asus mATX, with an AMP XP2200 i think, it's just going to end up a BSD server really since i don't game and i do all my aplication type stuff on my powerbook. I'm not really worried too much about taxing a PSU, just something that won't be too noisy or cost me an arm and a leg.

14-April-04, 07:22 PM		#4 (permalink)
Lunamods Apex Tech Maniac Supreme	PC Power And Cooling would be your best bet for a 1U PSU although might be expensive.

14-April-04, 07:25 PM		#5 (permalink)
Wordbiker Apex Tech God	I was running a Chaintech mATX nForce2 board with an XP1800+ OCed to 1900 MHz on a 150W eMachines PSU that was 6 years old....of course, the mobo eventually died, but I'm not absolutely sure it was due to lack of power since I never had any other symptoms. I checked 1U PSUs out and they get expensive quick! Sparkle seems to make a lot of them, and that's a great brand. I'd recommend going with at least a 250W. Better to have less load than take a chance of killing hardware...

14-April-04, 07:40 PM		#8 (permalink)
paige Apex Advanced Techie	wow, 99 bucks, that's a tad steep for my pockets. is there any way to mod a "normal" psu to be smaller, or is it safe to leave it "unenclosed" in a sealed off case? does it need to be grounded some special way to turn on? btw, you guys are all just as friendly as i remember from a year or so ago when i stopped frequenting PR.

14-April-04, 07:45 PM		#9 (permalink)
Iateronmly Smooth Operator	I'd try to save up if I were you, 99 bucks is just a couple of plasma donations after all.

14-April-04, 07:46 PM		#10 (permalink)
DuplexEmotions Bi P-Hoe-lar	you can take the case off of it, just remember that if you touch the wrong leads or a component touches them someone/thing can/will end up fried.

14-April-04, 07:46 PM		#11 (permalink)
paige Apex Advanced Techie	thanks Laternomly, even that suggestion makes me woozy.