Hardware Doctor

Spc. Forces Bob · 30-June-03, 09:55 PM

I have a abit nf7-s V 2.0. Whenever i turn on hardware doctor to check my specs, my cpu fan fails. Can someoen tell me how to fix this. Just a nother software that lets you read fan speeds and temps would do just fine also. Oh yeah CpuZ dosn't work on my comp either it loads but a pop up says some functions will not work, and all it will give me is my over all clock speed.

BigAkita · 30-June-03, 10:16 PM

Do a google for wcpuid. That will take care of your CPU-Z problem. MBM is pretty much the standard for temp and fan readouts.

putwig · 30-June-03, 10:18 PM

Motherboard Monitor 5.

http://mbm.livewiredev.com/

Spc. Forces Bob · 30-June-03, 10:23 PM

thanks lots BA and gliterkill, by they way BA , nice pick on the sig.

putwig · 30-June-03, 10:30 PM

Finally I dethrone the king ........ I am GlitterKill!

Yay Me!

Spc. Forces Bob · 30-June-03, 10:36 PM

hahah oh my why in the world did i call your glitter kill. hahahaha im going insane from teh 4 weeks i just went withough my computer, can you believe it, i actualy had to go outside!

psychofunk · 30-June-03, 10:38 PM

CPU-z works great for me as for the fan thing the only suggestion I have is MBM.

Spc. Forces Bob · 30-June-03, 11:15 PM

i got mobo manager and wen i try hardware doctor it works now for soem reason but says my board temp is 117degrees celcius!

FoeHammer · 30-June-03, 11:31 PM

I'd suggest just uninstalling the Hardware Doctor and use MBM exclusively. That's what I ended up doing.

That Hardware Doctor tended to be a bit buggy and drew way too many resources.

The only snag I ran into was configuring MBM for my motherboard as far as which sensor was which. After that no problems.

Spc. Forces Bob · 01-July-03, 01:01 AM

yeah im having some problems with that too

jhoop2002 · 01-July-03, 01:21 AM

i have the same baord and the hardware monitor works fine for me, although i hooked up this blue and black cord from the psu to the mobo fan headers and i don't get a reading from the psu. Shouldn't i or do i need another program??

Spc. Forces Bob · 01-July-03, 01:30 AM

perhaps you should, but maybe its just messed up, all the same if the fans on your pushy are spinin, your fine

. i dont care to much for rpms they dont to me any good i just like the temps

30-June-03, 09:55 PM		#1 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	Hardware Doctor I have a abit nf7-s V 2.0. Whenever i turn on hardware doctor to check my specs, my cpu fan fails. Can someoen tell me how to fix this. Just a nother software that lets you read fan speeds and temps would do just fine also. Oh yeah CpuZ dosn't work on my comp either it loads but a pop up says some functions will not work, and all it will give me is my over all clock speed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Should I see a doctor about this?	Fred_G	Anything Goes	29	21-November-06 11:43 PM
The Register // BBC launches Doctor Who spin-off	Gizmo	The Register RSS	0	18-October-05 03:59 AM
The Doctor Is In!!!	SirDavisCarrots	Windows OS Problems	4	12-July-05 02:39 PM
Anyone a doctor or know someone that is?	danbanger	Anything Goes	4	08-October-04 06:34 PM

30-June-03, 10:16 PM		#2 (permalink)
BigAkita n00b-ass reviewer	Do a google for wcpuid. That will take care of your CPU-Z problem. MBM is pretty much the standard for temp and fan readouts.

30-June-03, 10:18 PM		#3 (permalink)
putwig Dr. Hydro Pimp	Motherboard Monitor 5. http://mbm.livewiredev.com/

30-June-03, 10:23 PM		#4 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	thanks lots BA and gliterkill, by they way BA , nice pick on the sig.

30-June-03, 10:30 PM		#5 (permalink)
putwig Dr. Hydro Pimp	Finally I dethrone the king ........ I am GlitterKill! Yay Me!

30-June-03, 10:36 PM		#6 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	hahah oh my why in the world did i call your glitter kill. hahahaha im going insane from teh 4 weeks i just went withough my computer, can you believe it, i actualy had to go outside!

30-June-03, 10:38 PM		#7 (permalink)
psychofunk Funky Psych-Hoe	CPU-z works great for me as for the fan thing the only suggestion I have is MBM.

30-June-03, 11:15 PM		#8 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	i got mobo manager and wen i try hardware doctor it works now for soem reason but says my board temp is 117degrees celcius!

30-June-03, 11:31 PM		#9 (permalink)
FoeHammer P-Hoe-lice	I'd suggest just uninstalling the Hardware Doctor and use MBM exclusively. That's what I ended up doing. That Hardware Doctor tended to be a bit buggy and drew way too many resources. The only snag I ran into was configuring MBM for my motherboard as far as which sensor was which. After that no problems.

01-July-03, 01:01 AM		#10 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	yeah im having some problems with that too

01-July-03, 01:21 AM		#11 (permalink)
jhoop2002 Apex Tech Maniac Supreme	i have the same baord and the hardware monitor works fine for me, although i hooked up this blue and black cord from the psu to the mobo fan headers and i don't get a reading from the psu. Shouldn't i or do i need another program??

01-July-03, 01:30 AM		#12 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	perhaps you should, but maybe its just messed up, all the same if the fans on your pushy are spinin, your fine . i dont care to much for rpms they dont to me any good i just like the temps