DFI LanParty NF2 woes :(

j-dogg · 02-September-05, 11:01 PM

So, apparently my DFI LanParty 2 has bit the dust. From a power bump. Florida Power and Light pisses me off. We have gone through Category 1 hurricanes and never had a single power flicker, yet for some strange reason we get power bumps in the middle of a starry night.

Anyway I'm not totally sure if it's dead but I have a video card and my XMS and my Barton 2600 in it and nothign happens, it powers on that's it. The XMS's memory LED's don't even power on. The keyboard isn't powering on either. All 4 LED's on the doiagnostic thingy light up. I don't get any error beeps.

This pisses me off. Can't I have a normal day where everything works on my high end computer?

flounder405 · 02-September-05, 11:03 PM

Hey the board slak sent me did the same thing...might sound crazy but i yanked the battery, put the jumper to clear and it sat for like a couple of weeks. After that i got it to boot.goo figure wierd critter.

j-dogg · 03-September-05, 02:17 AM

Well I fixed my problem, seems the JP1 was set to Clear CMOS. I let it sit for a week and forgot I never changed the jumper back.

Well now that I have my Choppers mod all apart this would be a good time to transfer into my server case and begin work on Choppers Mod v2.0

$SOLID$ Necro · 03-September-05, 04:24 AM

Good news man!!!
Maybe I can catch a bit of that luck and mine will check out ok tommorow

THRASHER2 · 03-September-05, 06:46 AM

Quote:

Originally Posted by $SOLID$ Necro


	Good news man!!! Maybe I can catch a bit of that luck and mine will check out ok tommorow

Fingers Crossed!!!!

02-September-05, 11:01 PM		#1 (permalink)
j-dogg Mystical Schwinn Guru	DFI LanParty NF2 woes :( So, apparently my DFI LanParty 2 has bit the dust. From a power bump. Florida Power and Light pisses me off. We have gone through Category 1 hurricanes and never had a single power flicker, yet for some strange reason we get power bumps in the middle of a starry night. Anyway I'm not totally sure if it's dead but I have a video card and my XMS and my Barton 2600 in it and nothign happens, it powers on that's it. The XMS's memory LED's don't even power on. The keyboard isn't powering on either. All 4 LED's on the doiagnostic thingy light up. I don't get any error beeps. This pisses me off. Can't I have a normal day where everything works on my high end computer?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ati woes	project vegas	Video Cards	2	10-June-06 01:42 AM
amd woes	LwrS10	AMD CPU/Motherboard OC	16	13-March-05 05:01 PM
AIM woes...	Cyno01	Other PC Problem / Help	18	11-March-05 12:26 AM
More new rig woes	godfoot	Motherboards / CPUs	9	18-November-04 08:44 PM
cd-rom woes	rezzix	Painting	7	28-September-02 08:59 AM

02-September-05, 11:03 PM		#2 (permalink)
flounder405 The Mack Daddy	Hey the board slak sent me did the same thing...might sound crazy but i yanked the battery, put the jumper to clear and it sat for like a couple of weeks. After that i got it to boot.goo figure wierd critter.

03-September-05, 02:17 AM		#3 (permalink)
j-dogg Mystical Schwinn Guru	Well I fixed my problem, seems the JP1 was set to Clear CMOS. I let it sit for a week and forgot I never changed the jumper back. Well now that I have my Choppers mod all apart this would be a good time to transfer into my server case and begin work on Choppers Mod v2.0

03-September-05, 04:24 AM		#4 (permalink)
$SOLID$ Necro Mastah Overclocker	Good news man!!! Maybe I can catch a bit of that luck and mine will check out ok tommorow