Stepping code ?

MaTtsPc · 02-June-04, 03:34 PM

ok i got this stepping on my 2600! axda2600dky4d z401586c40230 aqtha0409upmw can you pimps help me out on it?

$SOLID$ Necro · 03-June-04, 01:01 AM

With what?

How much OC potential it has?

What the stepping codes mean?

TekXoID · 03-June-04, 01:16 AM

You've got a multiplier locked Early-March 2004 Barton.

Since it is MP locked (Don't let this deter you I've had a 0347 @ 230FSB) I would start out around 210FSB/v1.8vCore and move in 10MHz FSB increments until unstable, then back down until it is. Once stable lower the vCore as much as possible while maintaining stability.
Use Prime95, Memtest86, and Sandra Burn-In to test O/C stability.

MaTtsPc · 03-June-04, 02:04 AM

Quote:

Originally Posted by TekXoID


	You've got a multiplier locked Early-March 2004 Barton. Since it is MP locked (Don't let this deter you I've had a 0347 @ 230FSB) I would start out around 210FSB/v1.8vCore and move in 10MHz FSB increments until unstable, then back down until it is. Once stable lower the vCore as much as possible while maintaining stability. Use Prime95, Memtest86, and Sandra Burn-In to test O/C stability.

Thank you much! Thats all i wanted to know. If it was a overclocker or not.

thanks
mattt

02-June-04, 03:34 PM		#1 (permalink)
MaTtsPc Apex Tech God	Stepping code ? ok i got this stepping on my 2600! axda2600dky4d z401586c40230 aqtha0409upmw can you pimps help me out on it?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Register // Is old code automatically good code?	Gizmo	The Register RSS	0	25-January-07 04:40 AM
Stepping code	MaTtsPc	AMD CPU/Motherboard OC	2	02-June-04 04:01 PM
Locked AMD Stepping Code list	$SOLID$ Necro	AMD CPU/Motherboard OC	0	08-December-03 12:37 AM
Better stepping F or Y?	Ace123	AMD CPU/Motherboard OC	1	07-November-03 09:52 PM

03-June-04, 01:01 AM		#2 (permalink)
$SOLID$ Necro Mastah Overclocker	With what? How much OC potential it has? What the stepping codes mean?

03-June-04, 01:16 AM		#3 (permalink)
TekXoID Banned	You've got a multiplier locked Early-March 2004 Barton. Since it is MP locked (Don't let this deter you I've had a 0347 @ 230FSB) I would start out around 210FSB/v1.8vCore and move in 10MHz FSB increments until unstable, then back down until it is. Once stable lower the vCore as much as possible while maintaining stability. Use Prime95, Memtest86, and Sandra Burn-In to test O/C stability.