overclocking

Roger20r · 30-November-03, 12:18 PM

I was to overclock my 2500xp i got a ga-7n400-L mobo 512 ddr ram pc 2700 and r my multipliers in my bios i cannot seem to find umm anywhere.Or do i have to use the jumpers on my mobo there pointing to top of tower that mean there off or on lol.

$SOLID$ Necro · 01-December-03, 12:05 AM

In the bios, you will find a setting for CPU speed, and chances are it is in "AUTO"

You have to switch it to "Manual" and then it will give you the option to change the spped of the FSB and the Multiplier.

Each Bios is different, so they may not be named the same as above, but the function is the same, but you get the idea

ZENNZZO · 01-December-03, 05:01 PM

I've got the n700-Pro. Bios are probably simular. from the upper left and going clockwise...open the advanced chipset features,
on system performance select "EXPERT". There will bw your CPU mhz. selector. Esc out then select
frequency/voltage control. There should be your multiplyer for CPU OCing. Sorry for the blurry pics, I'm kinda shakky today.

hardwaregEEk · 01-December-03, 05:05 PM

solid i have a ga-7n400 - L ... you are right about the FSB settings... its pretty hecktik when u want to overclock with this board ...

The multipliers are on the board called "CLK_RATIO" on the top whihc u have to play or look in the chart that came with the manual

and then do the math and try that speed by setting up the FSB and the multiplier from the board.

press CTRL+F1 when u enter the bios for advanced info:

Set the FSB from Bios... then go to the board and turn the seitches!

Roger20r · 02-December-03, 06:11 AM

I think i got a locked version of 2500xp cause when i change ratio nuttin happens but i did change fsb in advance to see what happens i moved it up 2 1950 mhz from 1830 untill i get new cooler and ne ram thursday lol. What should my voltage be at ause it is now at almost 1.7. i don
t see expert i only see turbo settings.

30-November-03, 12:18 PM		#1 (permalink)
Roger20r Apex Techie Wannabe	overclocking I was to overclock my 2500xp i got a ga-7n400-L mobo 512 ddr ram pc 2700 and r my multipliers in my bios i cannot seem to find umm anywhere.Or do i have to use the jumpers on my mobo there pointing to top of tower that mean there off or on lol.

01-December-03, 05:01 PM		#3 (permalink)
ZENNZZO Direct Cool Hoe	I've got the n700-Pro. Bios are probably simular. from the upper left and going clockwise...open the advanced chipset features, on system performance select "EXPERT". There will bw your CPU mhz. selector. Esc out then select frequency/voltage control. There should be your multiplyer for CPU OCing. Sorry for the blurry pics, I'm kinda shakky today. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Overclocking with K8V-X	AlkalineOmen	AMD CPU/Motherboard OC	1	30-September-05 03:01 AM
Overclocking a 2.5 ghz P4 too ?	VODKA	Intel CPU/Motherboard OC	50	31-March-05 10:40 PM
Overclocking!	VODKA	Video Cards	3	25-January-05 04:53 PM
Overclocking My P4	Psylariser	Intel CPU/Motherboard OC	3	24-December-03 08:58 PM
overclocking to the max yo!	Chunckonuts	Motherboards / CPUs	5	22-September-03 03:41 PM

01-December-03, 12:05 AM		#2 (permalink)
$SOLID$ Necro Mastah Overclocker	In the bios, you will find a setting for CPU speed, and chances are it is in "AUTO" You have to switch it to "Manual" and then it will give you the option to change the spped of the FSB and the Multiplier. Each Bios is different, so they may not be named the same as above, but the function is the same, but you get the idea

01-December-03, 05:05 PM		#4 (permalink)
hardwaregEEk Apex Master Tech Apprentice	solid i have a ga-7n400 - L ... you are right about the FSB settings... its pretty hecktik when u want to overclock with this board ... The multipliers are on the board called "CLK_RATIO" on the top whihc u have to play or look in the chart that came with the manual and then do the math and try that speed by setting up the FSB and the multiplier from the board. press CTRL+F1 when u enter the bios for advanced info: Set the FSB from Bios... then go to the board and turn the seitches!

02-December-03, 06:11 AM		#5 (permalink)
Roger20r Apex Techie Wannabe	I think i got a locked version of 2500xp cause when i change ratio nuttin happens but i did change fsb in advance to see what happens i moved it up 2 1950 mhz from 1830 untill i get new cooler and ne ram thursday lol. What should my voltage be at ause it is now at almost 1.7. i don t see expert i only see turbo settings.