best oc everyone

mot19 · 06-August-03, 11:22 AM

ok everyone lets copy amd's thread, post your best OC's, ever!
Ill start it off, i OC'ed my friends pentium 4 1.6 northwood to 2.1 ghz. i was afraid but he said it was ok. I guess its useless if he dosnt overclock since he has 10 fans in his rig and he never wants to overclock. Now hes happier than ever.

hawklen · 06-August-03, 11:27 AM

I overclocked my friends p2 266 (66mhz bus) to 400mhz (100mhzbus) Runs faster than my other friends p3 celeron 400mhz.

KayinStorm · 06-August-03, 11:30 AM

Of course it does. It has cache.

mot19 · 06-August-03, 11:33 AM

hey guys as long as ur talking bout pentium 2's i have a dual pentium 2 sitting around. Each is at 300. think i could get it to 500 each? That would be 1 ghz on a pentium 2. that would be awesome.

hawklen · 06-August-03, 11:42 AM

Depending on the board, whatever BIOS settings for FSB, multiplyer, voltage. This board of my friends, can run p3's on a riser card as well, so technically its a transistion board from p2 to p3(via a ppga socket riser card).

This baord as options for manually setting the multiplier to 7x I beleive, upping the voltage to almost 3volts, and a fsb up to 100mhz. Unless you can find a dual board with those options, that sadly, you wont get to 500mhz.

mot19 · 06-August-03, 11:54 AM

mannnnn i have a dual board, and im feeling this riser thing? Where can i find two of them? im thinking 2 pentium 3 1.1 ghz. omg that would be awesome. please hook me up al might hawklen

hawklen · 06-August-03, 11:58 AM

Only if your motherboard, supports it. It might with a BIOS upgrade.

mot19 · 06-August-03, 12:09 PM

like flashing the bios? man thats acient mobo. It would be great if i could. I belive i can overclock the fsb and multiplier but no voltages. Do you think i can oc a 300mhz pentium 2 to 500 mhz without voltage changes?

hawklen · 06-August-03, 12:10 PM

Well, without the name, model number and specs on the board theres jack and sh!t I can do, and jack left town.

eldiablo · 20-August-03, 11:38 AM

My intel overclocks of note

Celeron 1.7 @ 2.25
P4 2.4B @ 2960
P4 2.8C @ 3598

Xphobe · 24-August-03, 09:29 AM

P4 2.80c / 3.50 (14 x 250)

temp = stock 33-48c / oc 35-52c

mb = Asus p4c800-e Deluxe
ram = twin Corsair cmx512-4000 (500 mhz)
vcard = Radeon 9800 pro 128mb (oc 445/370)
case = Thermaltake 2000a
hsf = swiftech mcx4000 / TT duct mod / TT smartfanII

The rig runs 100% stable, and very fast. Doubt many AMDs would performe much better

AMD

TekXoID · 24-August-03, 09:55 AM

P4 2.4C @ 3.6GHz (12x300MHz vCore=1.575)

But I run at stock clocks unless I am going to run Doom ]|[ Demo or something extremely intensive.

HawkEye_Pierce · 24-August-03, 06:51 PM

2.4 at 3600 all day long! about 20 hours straight. (300x12=3600) not had a problem in months!

TekXoID · 24-August-03, 06:59 PM

Hawk, on a 2.4B? That clockspeed is possible but the fsb of 300 is not possible on the 2.4B...surely you mean 2.4C?

HawkEye_Pierce · 24-August-03, 08:03 PM

I do mean 2.4C, I just need to change my sig wich says 2.4B. sorry for the mix up. LOL Hmmmm 2.4 has a 18x multi. 18x300=5400MHz 5.4GHz!!!!!!!!!!!!!!!!!!!!!!! Holy fu-ckin sh!t!!!! Thats fast!

mot19 · 27-August-03, 12:21 PM

everyone i didnt know where in the hell to put this one but i got a cyrix 233 to 365! WOOHOOO! Im talking intel celeron HSF for that baby. JK! I got it to 290 something. My friend has it and loves it. Even if it has 64kb of cache and rides a 80 something bus!

dudley123 · 27-August-03, 01:25 PM

My P4 2.8 -3856. Temp is right around 48-50. It is water cooled so that is how I can get the nice temp for that overclock. I am looking into overclocking my 9800 but don;t know to much about it.

M.D.K. · 27-August-03, 03:14 PM

mot: first of all, dual cpu's dont double the speed. 500x 2cpus doesnt = 1000mhz. On to the second point, yeah, you can overclock on a doal board just as easily as on a single board. (see below) If you cant in the bios, which is most likely because most dual cpu boards dont have OC options, then software OC it with something like CPUFSB.

As for me, I have dual slot1 800's running stable at 1Ghz. each. The hghest i've ever got them is 1.1Ghz, but that was with all kinds of room fans and ducting etc, and it wasnt exactly stable. Still, thats a 138% OC. To match me on a 3.0C you'd have to run it at 4.14GHz, and im using HORRIBLE air cooling. Not too bad i think.

06-August-03, 11:22 AM		#1 (permalink)
mot19 Apex Tech God	best oc everyone ok everyone lets copy amd's thread, post your best OC's, ever! Ill start it off, i OC'ed my friends pentium 4 1.6 northwood to 2.1 ghz. i was afraid but he said it was ok. I guess its useless if he dosnt overclock since he has 10 fans in his rig and he never wants to overclock. Now hes happier than ever.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-August-03, 11:27 AM		#2 (permalink)
hawklen PCApex's Mouthy Stepchild	I overclocked my friends p2 266 (66mhz bus) to 400mhz (100mhzbus) Runs faster than my other friends p3 celeron 400mhz.

06-August-03, 11:30 AM		#3 (permalink)
KayinStorm Apex Tech God	Of course it does. It has cache.

06-August-03, 11:33 AM		#4 (permalink)
mot19 Apex Tech God	hey guys as long as ur talking bout pentium 2's i have a dual pentium 2 sitting around. Each is at 300. think i could get it to 500 each? That would be 1 ghz on a pentium 2. that would be awesome.

06-August-03, 11:42 AM		#5 (permalink)
hawklen PCApex's Mouthy Stepchild	Depending on the board, whatever BIOS settings for FSB, multiplyer, voltage. This board of my friends, can run p3's on a riser card as well, so technically its a transistion board from p2 to p3(via a ppga socket riser card). This baord as options for manually setting the multiplier to 7x I beleive, upping the voltage to almost 3volts, and a fsb up to 100mhz. Unless you can find a dual board with those options, that sadly, you wont get to 500mhz.

06-August-03, 11:54 AM		#6 (permalink)
mot19 Apex Tech God	mannnnn i have a dual board, and im feeling this riser thing? Where can i find two of them? im thinking 2 pentium 3 1.1 ghz. omg that would be awesome. please hook me up al might hawklen

06-August-03, 11:58 AM		#7 (permalink)
hawklen PCApex's Mouthy Stepchild	Only if your motherboard, supports it. It might with a BIOS upgrade.

06-August-03, 12:09 PM		#8 (permalink)
mot19 Apex Tech God	like flashing the bios? man thats acient mobo. It would be great if i could. I belive i can overclock the fsb and multiplier but no voltages. Do you think i can oc a 300mhz pentium 2 to 500 mhz without voltage changes?

06-August-03, 12:10 PM		#9 (permalink)
hawklen PCApex's Mouthy Stepchild	Well, without the name, model number and specs on the board theres jack and sh!t I can do, and jack left town.

20-August-03, 11:38 AM		#10 (permalink)
eldiablo Apex Techie II	My intel overclocks of note Celeron 1.7 @ 2.25 P4 2.4B @ 2960 P4 2.8C @ 3598

24-August-03, 09:29 AM		#11 (permalink)
Xphobe Apex Techie II	P4 2.80c / 3.50 (14 x 250) temp = stock 33-48c / oc 35-52c mb = Asus p4c800-e Deluxe ram = twin Corsair cmx512-4000 (500 mhz) vcard = Radeon 9800 pro 128mb (oc 445/370) case = Thermaltake 2000a hsf = swiftech mcx4000 / TT duct mod / TT smartfanII The rig runs 100% stable, and very fast. Doubt many AMDs would performe much better AMD

24-August-03, 09:55 AM		#12 (permalink)
TekXoID Banned	P4 2.4C @ 3.6GHz (12x300MHz vCore=1.575) But I run at stock clocks unless I am going to run Doom ]\|[ Demo or something extremely intensive.

24-August-03, 06:51 PM		#13 (permalink)
HawkEye_Pierce Ham Op-Hoe-rator	2.4 at 3600 all day long! about 20 hours straight. (300x12=3600) not had a problem in months!

24-August-03, 06:59 PM		#14 (permalink)
TekXoID Banned	Hawk, on a 2.4B? That clockspeed is possible but the fsb of 300 is not possible on the 2.4B...surely you mean 2.4C?

24-August-03, 08:03 PM		#15 (permalink)
HawkEye_Pierce Ham Op-Hoe-rator	I do mean 2.4C, I just need to change my sig wich says 2.4B. sorry for the mix up. LOL Hmmmm 2.4 has a 18x multi. 18x300=5400MHz 5.4GHz!!!!!!!!!!!!!!!!!!!!!!! Holy fu-ckin sh!t!!!! Thats fast!

27-August-03, 12:21 PM		#16 (permalink)
mot19 Apex Tech God	everyone i didnt know where in the hell to put this one but i got a cyrix 233 to 365! WOOHOOO! Im talking intel celeron HSF for that baby. JK! I got it to 290 something. My friend has it and loves it. Even if it has 64kb of cache and rides a 80 something bus!

27-August-03, 01:25 PM		#17 (permalink)
dudley123 Apex Master Tech Apprentice	My P4 2.8 -3856. Temp is right around 48-50. It is water cooled so that is how I can get the nice temp for that overclock. I am looking into overclocking my 9800 but don;t know to much about it.

27-August-03, 03:14 PM		#18 (permalink)
M.D.K. Apex Tech Maniac Supreme	mot: first of all, dual cpu's dont double the speed. 500x 2cpus doesnt = 1000mhz. On to the second point, yeah, you can overclock on a doal board just as easily as on a single board. (see below) If you cant in the bios, which is most likely because most dual cpu boards dont have OC options, then software OC it with something like CPUFSB. As for me, I have dual slot1 800's running stable at 1Ghz. each. The hghest i've ever got them is 1.1Ghz, but that was with all kinds of room fans and ducting etc, and it wasnt exactly stable. Still, thats a 138% OC. To match me on a 3.0C you'd have to run it at 4.14GHz, and im using HORRIBLE air cooling. Not too bad i think.