New P4s w/800MHz and HT

G Money · 29-June-03, 03:44 AM

When are the 2.4, 2.6, and 2.8 GHz CPUs suppose to be out that support the 800MHz FSB and HT?

G

corruptjoker · 29-June-03, 04:11 AM

http://www.intel.com/products/deskto..._p4320_03ww26&

Lord_nikon · 01-July-03, 08:43 AM

Ya my freind just bought a 2.8 ht.......I was drueling........I cant wait untill he installs it and I can see the performance on that mutha...

hutojaba · 10-July-03, 02:43 PM

so am i gonna need to upgrade my motherboard if i move over to the 800 fsbs?

TekXoID · 10-July-03, 03:00 PM

Quote:


	Originally posted by hutojaba so am i gonna need to upgrade my motherboard if i move over to the 800 fsbs?

SiS655FX supports 800MHz FSB speeds, but by the time it is released, it will be too late because 1200MHz FSB P4 will be out.

I have my P4 2.4C @ 284x12 (3.4GHz), its quite an overclocker

TYCOON · 12-July-03, 03:13 PM

I have a p4 2.8 Ghz P4 800 Fsb and a MSI 865PE Neo-LS Mobo, i heard with the stock p4 cooling you can get these to 3.5 GHz?

Can anyone confirm that? Just asking, am interested in over clocking and it will be my first time.

My case cooling is as shown below , my computer case is also located beside my air conditioning vent to the air blowing into my computer (says the case temp) is 15* Celsius.

G Money · 12-July-03, 04:33 PM

I've heard of guys getting it up to 3.2GHz with stock cooling, or a really good heatsink/fan. You might want to check the review section of newegg.com, because often people talk about their overclocking success. Maybe Tom's Hardware has something on his website.

G

bushh · 13-July-03, 12:01 AM

I have a 3.0 GHz P4 800Mhz, and I got it almost to 3.5 with a TEC Cooler... it will go a little (really little) higher, but i like it how it is

TekXoID · 13-July-03, 12:27 AM

Quote:


	Originally posted by bushh I have a 3.0 GHz P4 800Mhz, and I got it almost to 3.5 with a TEC Cooler... it will go a little (really little) higher, but i like it how it is

I have a 2.4C, overclocked easily to 3.4GHz. I am using a MCX4000 and getting roughly 30Ã‚Âº Idle and 34-38Ã‚Âº Load.
Edit: Major temperature typo fixed

For overclockers and/or Intel loyales, the 2.4C pwns

TYCOON · 13-July-03, 12:45 AM

Nice , makes me wish i hadn't spent all money

justinvalencia · 18-July-03, 06:49 PM

i tought you were always against OC'ing, tek, you always said it puts to much stress on these already highly stressed parts... and that it decreases the life of the cpu by like ten times!

glad you've come to your sences*

btw tek, do you think that your chips speed toped out first or its fsb?

29-June-03, 03:44 AM		#1 (permalink)
G Money Fuel Hoe-lio	New P4s w/800MHz and HT When are the 2.4, 2.6, and 2.8 GHz CPUs suppose to be out that support the 800MHz FSB and HT? G

12-July-03, 03:13 PM		#6 (permalink)
TYCOON Apex Tech God	I have a p4 2.8 Ghz P4 800 Fsb and a MSI 865PE Neo-LS Mobo, i heard with the stock p4 cooling you can get these to 3.5 GHz? Can anyone confirm that? Just asking, am interested in over clocking and it will be my first time. My case cooling is as shown below , my computer case is also located beside my air conditioning vent to the air blowing into my computer (says the case temp) is 15* Celsius. Attached Thumbnails

18-July-03, 06:49 PM		#11 (permalink)
justinvalencia Apex Master Tech Apprentice	i tought you were always against OC'ing, tek, you always said it puts to much stress on these already highly stressed parts... and that it decreases the life of the cpu by like ten times! glad you've come to your sences* btw tek, do you think that your chips speed toped out first or its fsb? Last edited by justinvalencia; 18-July-03 at 07:03 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS p4 2.8 800mhz Fsb Complete system	Daniel B	Trading Post	1	27-December-04 02:41 AM
Wanted: Slot A K7 800MHz to 1 GHz	j-dogg	Trading Post	2	23-February-04 03:06 PM
P4 3.0Ghz with 800MHz FSB	Red02	PC Apex Web News	0	17-April-03 02:27 PM
Canterwood 800MHz FSB Reviews...	Skew	PC Apex Web News	0	14-April-03 07:29 PM
Will 800mhz Duron OC at FSB133?	chiquita	Motherboards / CPUs	2	03-October-02 01:37 AM

29-June-03, 04:11 AM		#2 (permalink)
corruptjoker Decept-Hoe-Con	http://www.intel.com/products/deskto..._p4320_03ww26&

01-July-03, 08:43 AM		#3 (permalink)
Lord_nikon Apex Tech Fanatic Supreme	Ya my freind just bought a 2.8 ht.......I was drueling........I cant wait untill he installs it and I can see the performance on that mutha...

10-July-03, 02:43 PM		#4 (permalink)
hutojaba Apex Techie I	so am i gonna need to upgrade my motherboard if i move over to the 800 fsbs?

12-July-03, 04:33 PM		#7 (permalink)
G Money Fuel Hoe-lio	I've heard of guys getting it up to 3.2GHz with stock cooling, or a really good heatsink/fan. You might want to check the review section of newegg.com, because often people talk about their overclocking success. Maybe Tom's Hardware has something on his website. G

13-July-03, 12:01 AM		#8 (permalink)
bushh Apex Tech Fanatic	I have a 3.0 GHz P4 800Mhz, and I got it almost to 3.5 with a TEC Cooler... it will go a little (really little) higher, but i like it how it is

13-July-03, 12:45 AM		#10 (permalink)
TYCOON Apex Tech God	Nice , makes me wish i hadn't spent all money