A Sweet First OC

bushh · 26-June-03, 12:37 AM

Not bad for the first OC on this new rig... nice low temps even @ 15% OCed... check the numbers, TEC really works, who said SubZeroG4 sucked?

anime-fan-man · 26-June-03, 02:46 AM

Damn thats fast.

neotheducky · 26-June-03, 02:48 AM

What was the starting clock speed?

ZENNZZO · 26-June-03, 04:26 AM

Is that from a 3.0ghz 800fsb P-4?

bushh · 26-June-03, 06:50 AM

yes read the WCPUID

bushh · 26-June-03, 02:35 PM

Anyone have any ideas how I can make it reach its maximum (3600)?
I am sure I can handle cooling it... i just got done playing 2 hours of counterstrike and it barely reached 34, its back down in about 2 minutes to 28...

Need some help... also, how about ideas improving on my 3DMark2003 score (see:http://forums.pcapex.com/showthread....&threadid=7029)

Thanks yall you've made this all possible

Cyphre · 26-June-03, 08:35 PM

I believe I read somebody else hitting 3.6 on air cooling, and I think it would depend on your RAM and what motherboard you're using. Some motherboards make overclocking easier and there might be options you need to change to get your whole system to run with 3.6ghz (such as voltages and the PCI/AGP clocks/voltages)

bushh · 26-June-03, 10:45 PM

I have a ASUS P4800C with 2GB of Corsair XMS PC3500

bushh · 26-June-03, 10:45 PM

Oh and its not really aircooled... it is TEC, thermoelectric cooling... the SubZeroG4 from Thermaltake... it rocks, buy it!

godzilla451 · 26-June-03, 11:05 PM

for those who haven't seen this in other posts, it's a peltier with automatic, electronically-controlled variable voltage.

Cyphre · 27-June-03, 02:10 AM

Yeah, I know what you're using for cooling, but I'm saying I saw someone else post they hit 3.6 on air cooling...so I obviously have no idea. Personally, I didn't think the subzero cooling system was really worth it because it's not going to provide a whole lot of cooling without a lot of cooling on the back of the peltier (which is why peltiers have been pretty limited to water-cooling setups)

Clan · 27-June-03, 10:51 AM

I have close to the same except cooling with air.
see thread under what chip..

Hit del on boot up to go to Cmos,
advanced-cpu (1st line) auto overclock 20%
turbo on or off depending on your system

Mine is very stable at 53C load 3.611mghrtz
Played everquest for 8 hours no drop.......

Max temp so far is 127F

I will be messing with the seperate adjustment some day but it is soooo easy with the auto overclock

Used the V-tool on my 9800Pro a bit as well.

Clan

bushh · 27-June-03, 11:51 PM

Wow dude I dont want to go that high on the temps.. 53C is damn high... i am tweaking now... i dont use the asus set percents tho... do manual, it allows more flexibility

*E|M|F*Virus* · 04-July-03, 01:50 PM

this is my first overclock , ever this is also the first water system i built i am impressed what you all think,

Also what and when can i go to 1:1 divider and what will it benefit?

P4 3.00 Gig 800fsb @ 3.71 1.725cv FSB 247.60 MHz 990.40 Buss Spd
Abit IC7-G MAX2/Antec 550w Variable
2x512 OCZ Platnimun pc3200EL 2-5-2-2 CL2
Radeon 9700Pro @ 350/340
5/4 Divider with setting to be worked lata
Swiftteck Watercooled H20-8500 CPU & VID Blocks
42c idle / 50c 100% Load
Windows XP SP1

Nos · 04-July-03, 03:33 PM

Quote:


	Originally posted by E\|M\|FVirus* this is my first overclock , ever this is also the first water system i built i am impressed what you all think, Also what and when can i go to 1:1 divider and what will it benefit? P4 3.00 Gig 800fsb @ 3.71 1.725cv FSB 247.60 MHz 990.40 Buss Spd Abit IC7-G MAX2/Antec 550w Variable 2x512 OCZ Platnimun pc3200EL 2-5-2-2 CL2 Radeon 9700Pro @ 350/340 5/4 Divider with setting to be worked lata Swiftteck Watercooled H20-8500 CPU & VID Blocks 42c idle / 50c 100% Load Windows XP SP1

Nah, you need to push it to 6.2Ghz !

*E|M|F*Virus* · 06-July-03, 09:39 AM

I just read about the vapor chill system i am really foaming at mouth now!!!

hawklen · 06-July-03, 12:07 PM

Need an AMD post in here..I'll oblige

AMD 2000+ (1.6ghz)

whoops caught my mouse cursor in there

bushh · 06-July-03, 11:53 PM

No Need for AMD here!!!

hawklen · 07-July-03, 09:11 AM

mwahaha! AMD is here to stay and whoop some Inhell ass.

Clan · 07-July-03, 09:51 AM

I think what he means is that this forum is for Intel and that AMD has it's own.

On the other hand comparing an intel 3.0 and an AMD 2000+ seems strange. they are just not in the same class......

Clan

26-June-03, 12:37 AM		#1 (permalink)
bushh Apex Tech Fanatic	A Sweet First OC Not bad for the first OC on this new rig... nice low temps even @ 15% OCed... check the numbers, TEC really works, who said SubZeroG4 sucked? Attached Thumbnails

27-June-03, 10:51 AM		#12 (permalink)
Clan Apex Techie Lite	3.6 on your set up should be easy I have close to the same except cooling with air. see thread under what chip.. Hit del on boot up to go to Cmos, advanced-cpu (1st line) auto overclock 20% turbo on or off depending on your system Mine is very stable at 53C load 3.611mghrtz Played everquest for 8 hours no drop....... Max temp so far is 127F I will be messing with the seperate adjustment some day but it is soooo easy with the auto overclock Used the V-tool on my 9800Pro a bit as well. Clan

06-July-03, 09:39 AM		#16 (permalink)
**E\|M\|FVirus*** Apex Techie Lite	.. I just read about the vapor chill system i am really foaming at mouth now!!!

06-July-03, 12:07 PM		#17 (permalink)
hawklen PCApex's Mouthy Stepchild	Need an AMD post in here..I'll oblige AMD 2000+ (1.6ghz) whoops caught my mouse cursor in there Attached Thumbnails

07-July-03, 09:51 AM		#20 (permalink)
Clan Apex Techie Lite	AMD here I think what he means is that this forum is for Intel and that AMD has it's own. On the other hand comparing an intel 3.0 and an AMD 2000+ seems strange. they are just not in the same class...... Clan

26-June-03, 02:46 AM		#2 (permalink)
anime-fan-man Apex Elite Tech	Damn thats fast.

26-June-03, 02:48 AM		#3 (permalink)
neotheducky Rubber Duck-Hoe	What was the starting clock speed?

26-June-03, 04:26 AM		#4 (permalink)
ZENNZZO Direct Cool Hoe	Is that from a 3.0ghz 800fsb P-4?

26-June-03, 06:50 AM		#5 (permalink)
bushh Apex Tech Fanatic	yes read the WCPUID

26-June-03, 02:35 PM		#6 (permalink)
bushh Apex Tech Fanatic	Anyone have any ideas how I can make it reach its maximum (3600)? I am sure I can handle cooling it... i just got done playing 2 hours of counterstrike and it barely reached 34, its back down in about 2 minutes to 28... Need some help... also, how about ideas improving on my 3DMark2003 score (see:http://forums.pcapex.com/showthread....&threadid=7029) Thanks yall you've made this all possible

26-June-03, 08:35 PM		#7 (permalink)
Cyphre Apex Tech Maniac	I believe I read somebody else hitting 3.6 on air cooling, and I think it would depend on your RAM and what motherboard you're using. Some motherboards make overclocking easier and there might be options you need to change to get your whole system to run with 3.6ghz (such as voltages and the PCI/AGP clocks/voltages)

26-June-03, 10:45 PM		#8 (permalink)
bushh Apex Tech Fanatic	I have a ASUS P4800C with 2GB of Corsair XMS PC3500

26-June-03, 10:45 PM		#9 (permalink)
bushh Apex Tech Fanatic	Oh and its not really aircooled... it is TEC, thermoelectric cooling... the SubZeroG4 from Thermaltake... it rocks, buy it!

26-June-03, 11:05 PM		#10 (permalink)
godzilla451 Apex Master Tech Apprentice	for those who haven't seen this in other posts, it's a peltier with automatic, electronically-controlled variable voltage.

27-June-03, 02:10 AM		#11 (permalink)
Cyphre Apex Tech Maniac	Yeah, I know what you're using for cooling, but I'm saying I saw someone else post they hit 3.6 on air cooling...so I obviously have no idea. Personally, I didn't think the subzero cooling system was really worth it because it's not going to provide a whole lot of cooling without a lot of cooling on the back of the peltier (which is why peltiers have been pretty limited to water-cooling setups)

27-June-03, 11:51 PM		#13 (permalink)
bushh Apex Tech Fanatic	Wow dude I dont want to go that high on the temps.. 53C is damn high... i am tweaking now... i dont use the asus set percents tho... do manual, it allows more flexibility

04-July-03, 01:50 PM		#14 (permalink)
**E\|M\|FVirus*** Apex Techie Lite	this is my first overclock , ever this is also the first water system i built i am impressed what you all think, Also what and when can i go to 1:1 divider and what will it benefit? P4 3.00 Gig 800fsb @ 3.71 1.725cv FSB 247.60 MHz 990.40 Buss Spd Abit IC7-G MAX2/Antec 550w Variable 2x512 OCZ Platnimun pc3200EL 2-5-2-2 CL2 Radeon 9700Pro @ 350/340 5/4 Divider with setting to be worked lata Swiftteck Watercooled H20-8500 CPU & VID Blocks 42c idle / 50c 100% Load Windows XP SP1

06-July-03, 11:53 PM		#18 (permalink)
bushh Apex Tech Fanatic	No Need for AMD here!!!

07-July-03, 09:11 AM		#19 (permalink)
hawklen PCApex's Mouthy Stepchild	mwahaha! AMD is here to stay and whoop some Inhell ass.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Register // Microsoft tastes sweet, sweet open source CRM	Gizmo	The Register RSS	0	14-February-06 09:06 PM
Sweet Chainsaw!	JimsZR2	Anything Goes	1	27-December-04 10:10 AM
Sweet !!!	0v3rki11	Anything Goes	3	19-August-04 10:13 PM
SWEET...I want it, and I need it	Crazy_J	Deals and Steals	0	07-April-04 05:14 AM
sweet top mod panel for a sweet deal	Gamma_Goblin	Case Modding	22	09-December-02 07:01 AM