My First OC

Fire Hawk · 08-January-05, 07:35 PM

After spending time on the net looking at OCing guides and instructions, I finally got up the courage to overclock my CPU. Originally, I was planning on overclocking my FSB but I couldn't find the right section in my BIOS.
******* SPECS *******
mobo : ASUS P4V533-MX
CPU : Intel Celeron 2.4 Ghz
Cooling : Koolance eXos with CPU-300-H06 waterblock

I successfully overclocked my CPU to 3.0Ghz without adjusting the Vcore or anything else.

However, I am still trying to OC my FSB. I can not find the variable in the BIOS and I am getting lost. Also, I would like to know if the Vcore can be adjusted in the BIOS and if so where.
Any tips/sugestions are appreciated!
Thanx

danbanger · 08-January-05, 09:16 PM

I am not very familiar with Intels but are you keeping an eye on your temps?

Fire Hawk · 08-January-05, 11:18 PM

Your concern is appericated, thanks. There's no need to worry about the temp (tiz' liquid cooled), right now it's at 23 degrees Celcius and it gets to about 26 degrees Celcius when I am running something like SETI@home.

08-January-05, 07:35 PM		#1 (permalink)
Fire Hawk Apex Tech Maniac	My First OC After spending time on the net looking at OCing guides and instructions, I finally got up the courage to overclock my CPU. Originally, I was planning on overclocking my FSB but I couldn't find the right section in my BIOS. ***** SPECS ***** mobo : ASUS P4V533-MX CPU : Intel Celeron 2.4 Ghz Cooling : Koolance eXos with CPU-300-H06 waterblock I successfully overclocked my CPU to 3.0Ghz without adjusting the Vcore or anything else. However, I am still trying to OC my FSB. I can not find the variable in the BIOS and I am getting lost. Also, I would like to know if the Vcore can be adjusted in the BIOS and if so where. Any tips/sugestions are appreciated! Thanx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-January-05, 09:16 PM		#2 (permalink)
danbanger Apex Tech Fanatic Supreme	I am not very familiar with Intels but are you keeping an eye on your temps?

08-January-05, 11:18 PM		#3 (permalink)
Fire Hawk Apex Tech Maniac	Your concern is appericated, thanks. There's no need to worry about the temp (tiz' liquid cooled), right now it's at 23 degrees Celcius and it gets to about 26 degrees Celcius when I am running something like SETI@home.