Any1 OCed a CORE2QUAD & a 680i MB???

qkon2whlz · 28-October-07, 12:00 AM

well i got me a Q6600 cpu and i love it!! but right now im stuck @ 3.3Mhz which is good dont get me wrong i just want to see if any of you have close to the same rig and have gotten better
ive heard of 3.4 speeds or higher

for info look in my signature

reflux · 28-October-07, 05:51 AM

If you're stuck at 3.3mhz then you really do have problems

Make sure you overvolt the northbridge, FSB, PLLs - if you haven't done this, boost them all by a small increment and see if this increases stability.

THRASHER2 · 28-October-07, 08:15 AM

Core 2 Q6600 (B3) (2.4Ghz) @ 3500mhz on Air

hwbot.org - THRASHER2's CPU-Z score

qkon2whlz · 28-October-07, 11:02 AM

ok here is all the info
im still new @ this but im learning did better this time then last
FSB- running @ 1470 (not linked with the memory)
CPU- @ x9 (top multiplier) everything disabled in cpu config. except the cores
MEMORY- 850 Mhz (manually put in)
5.5.5.15.2T
the thing is i dont know what to do with the advanced mem. setting they are @ auto right now as follows
TRRD-5
TRC- 24
TWR-6
TWTR-10
TREF-7.8 u.S
NOW here are my VOLTS
this is all the options i have in my bios
AND YES I HAVE UPDATED MY BIOS AS WELL
CPU CORE- 1.36v
FSB- 1.4v (only goes to 1.5)
MEMORY-2.1v
nFORCE SPP-1.45v (only goes to 1.55)
nFORCE MCP-1.55v (only goes to 1.75)
HT nFORCE SPP <-> MCP- 1.3v (only goes to 1.55)
thees are all the voltage options in my bios
so what do you think is the best place to start?

Zaltan · 28-October-07, 11:04 AM

Run memory 1:1... And try 1.4v for the CPU.

qkon2whlz · 28-October-07, 11:06 AM

Quote:

Originally Posted by Zaltan


	Run memory 1:1...

ok will try

qkon2whlz · 28-October-07, 11:27 AM

it not going to do it man

reflux · 28-October-07, 11:29 AM

Quote:

Originally Posted by qkon2whlz


	it not going to do it man

Yeah don't worry about 1:1. I run mine at 4:5. Keep it slow for the time being until you figure out your CPU clocks.

Zaltan · 28-October-07, 11:35 AM

You've got really good memory though Reflux. And if your looking for top overclocks its normally best to run 1:1.

1:1 didn't work?

28-October-07, 12:00 AM		#1 (permalink)
qkon2whlz Apex Advanced Techie	Any1 OCed a CORE2QUAD & a 680i MB??? well i got me a Q6600 cpu and i love it!! but right now im stuck @ 3.3Mhz which is good dont get me wrong i just want to see if any of you have close to the same rig and have gotten better ive heard of 3.4 speeds or higher for info look in my signature Attached Thumbnails

28-October-07, 05:51 AM		#2 (permalink)
reflux Sempr0n?	Re: Any1 OCed a CORE2QUAD & a 680i MB??? If you're stuck at 3.3mhz then you really do have problems Make sure you overvolt the northbridge, FSB, PLLs - if you haven't done this, boost them all by a small increment and see if this increases stability.

28-October-07, 08:15 AM		#3 (permalink)
THRASHER2 PCApex Newscaster	Re: Any1 OCed a CORE2QUAD & a 680i MB??? Core 2 Q6600 (B3) (2.4Ghz) @ 3500mhz on Air hwbot.org - THRASHER2's CPU-Z score

28-October-07, 11:02 AM		#4 (permalink)
qkon2whlz Apex Advanced Techie	Re: Any1 OCed a CORE2QUAD & a 680i MB??? ok here is all the info im still new @ this but im learning did better this time then last FSB- running @ 1470 (not linked with the memory) CPU- @ x9 (top multiplier) everything disabled in cpu config. except the cores MEMORY- 850 Mhz (manually put in) 5.5.5.15.2T the thing is i dont know what to do with the advanced mem. setting they are @ auto right now as follows TRRD-5 TRC- 24 TWR-6 TWTR-10 TREF-7.8 u.S NOW here are my VOLTS this is all the options i have in my bios AND YES I HAVE UPDATED MY BIOS AS WELL CPU CORE- 1.36v FSB- 1.4v (only goes to 1.5) MEMORY-2.1v nFORCE SPP-1.45v (only goes to 1.55) nFORCE MCP-1.55v (only goes to 1.75) HT nFORCE SPP <-> MCP- 1.3v (only goes to 1.55) thees are all the voltage options in my bios so what do you think is the best place to start?

28-October-07, 11:04 AM		#5 (permalink)
Zaltan Apex Tech God	Re: Any1 OCed a CORE2QUAD & a 680i MB??? Run memory 1:1... And try 1.4v for the CPU.

28-October-07, 11:27 AM		#7 (permalink)
qkon2whlz Apex Advanced Techie	Re: Any1 OCed a CORE2QUAD & a 680i MB??? it not going to do it man

28-October-07, 11:35 AM		#9 (permalink)
Zaltan Apex Tech God	Re: Any1 OCed a CORE2QUAD & a 680i MB??? You've got really good memory though Reflux. And if your looking for top overclocks its normally best to run 1:1. 1:1 didn't work?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anandtech // EVGA 680i LT SLI: NVIDIA's 680i Cost Reduced	Gizmo	Anandtech RSS	0	28-March-07 10:10 AM
Anandtech // EVGA 680i LT SLI: NVIDIA's 680i Cost Reduced	Gizmo	Anandtech RSS	0	28-March-07 04:10 AM
any1 seen me	vladimir	Anything Goes	14	15-February-03 04:48 PM
Any1 try this yet?	FUBAR	Anything Goes	26	22-January-03 09:31 AM
Does Any1 Know How...	FUBAR	Anything Goes	6	12-January-03 01:52 PM