help me build a $930-940 rig

sirbj · 06-March-07, 12:53 AM

good day.
im from the philippines.
could you help me build my rig?
i have a $930-940 dollars budget.
what specifications could you refer to me
based on my budget.
mobo's that are available here are
asus,gigabyte,msi,intel,ecs, foxconn
memory available here are
kingston, kingmax, apacer, team extreem, geil, corsair, pqi
based on the processor, i would prefer the e4300 because
based on the reviews that i have read, you can overclock
it easily because of its 9x multiplier.
thank you very much for your time.
you may e-mail me at bjefabella@gmail.com

s1ugh34d · 28-March-07, 01:18 AM

E4300 C2D $163 ($133 after april 13th)
Gigabyte DS3 ~$140-$160
2GB of any typeof DDR2 ram, all depending on you Overclocking experience ~$150-$400
A case that will hold it all ~$50-$100
A WD Raptor or two ~$200-$400
A OCZ PSU ~$120-$190
whatever type of media drive you want (add cost here)

$820 on the low side, if you go with the stuff i mentioned. A lessexpensive HDD would lower the cost a bit.

Just rough estimates, thinking about uild one myself...

Zaltan · 28-March-07, 03:14 AM

Quote:

Originally Posted by s1ugh34d


	2GB of any typeof DDR2 ram, all depending on you Overclocking experience

Newegg.com - BUFFALO Firestix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail

The stuff s1ugh34d recommended is good. Though don't bother with Raptor's if your on a budget, just get something like a 250GB drive.

4x0n · 28-March-07, 04:12 AM

Quote:

Originally Posted by Zaltan


	Newegg.com - BUFFALO Firestix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail The stuff s1ugh34d recommended is good. Though don't bother with Raptor's if your on a budget, just get something like a 250GB drive.

Sorry to rain on your parade but yhe guy did not mention Buffalo as one of the manufacturers which was available to him

Zaltan · 28-March-07, 05:12 AM

Quote:

Originally Posted by 4x0n


	Sorry to rain on your parade but yhe guy did not mention Buffalo as one of the manufacturers which was available to him

Oh yeah, I just assumed he'd be American... Team Group then, I don't reckon anyone will know about prices in the philippines.

06-March-07, 12:53 AM		#1 (permalink)
sirbj Apex Techie Wannabe	help me build a $930-940 rig good day. im from the philippines. could you help me build my rig? i have a $930-940 dollars budget. what specifications could you refer to me based on my budget. mobo's that are available here are asus,gigabyte,msi,intel,ecs, foxconn memory available here are kingston, kingmax, apacer, team extreem, geil, corsair, pqi based on the processor, i would prefer the e4300 because based on the reviews that i have read, you can overclock it easily because of its 9x multiplier. thank you very much for your time. you may e-mail me at bjefabella@gmail.com

28-March-07, 01:18 AM		#2 (permalink)
s1ugh34d Apex Tech God	Re: help me build a $930-940 rig E4300 C2D $163 ($133 after april 13th) Gigabyte DS3 ~$140-$160 2GB of any typeof DDR2 ram, all depending on you Overclocking experience ~$150-$400 A case that will hold it all ~$50-$100 A WD Raptor or two ~$200-$400 A OCZ PSU ~$120-$190 whatever type of media drive you want (add cost here) $820 on the low side, if you go with the stuff i mentioned. A lessexpensive HDD would lower the cost a bit. Just rough estimates, thinking about uild one myself...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New PC Build	CK-Phil	Hardware Advice Corner	18	09-September-06 02:39 PM
Help me build a new rig	Spectrum	AMD CPU/Motherboard OC	20	10-September-05 12:39 PM
Need help with a build.	djdeth	Other PC Problem / Help	6	22-November-04 08:21 PM
Buy & Mod or Build...	Nightmare6	Case Modding	4	17-November-04 02:57 PM
First Build - Need Help!	sportzkat	Motherboards / CPUs	7	01-January-04 10:07 PM