40mm Cooling

eldiablo · 09-June-03, 04:25 PM

Hey all

Can anyone recommend a beat 40mm fan for use on a northbridge? I was looking for 15+cf/m but can only find <10!!!! If you know where I can source one in the Uk also it would be wicked.

Thanks all

V4mpiro · 09-June-03, 05:33 PM

I dont know if this is going to be 10 when it is shipped internationaly, but here is one from Xoxide http://www.xoxide.com/40evbalbearf.html

Buzz_4_20 · 09-June-03, 05:44 PM

here's one
http://store.yahoo.com/nexfan03/sade40suchfa.html

40x40x28 at 10,000rpm's 13.8CFM

you also might wan't to consider a standard case fan with a bracket to blow on the Chipset HSF it's quieter and put out more air, also cools off more of the board.

eldiablo · 09-June-03, 07:55 PM

Cool thanks

Anyone maybe know of a 60->40mm adapter? Or do I have to make one

09-June-03, 04:25 PM		#1 (permalink)
eldiablo Apex Techie II	40mm Cooling Hey all Can anyone recommend a beat 40mm fan for use on a northbridge? I was looking for 15+cf/m but can only find <10!!!! If you know where I can source one in the Uk also it would be wicked. Thanks all

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
40mm Chipset Fan	Zer0s	Heatsinks / fans	5	21-September-04 11:59 PM
Clear 40mm fans????!!!!!!!	Fenderplayer	Heatsinks / fans	5	11-April-04 05:14 PM
40mm fan	Gumby55	Other Modding	7	27-October-03 01:00 PM
40mm Case Fan???	Vash_The_Stampede	Case Cooling	16	14-August-03 02:09 AM
NEED 40MM Fans	Dimazz	Case Cooling	12	05-August-03 05:42 PM

09-June-03, 05:33 PM		#2 (permalink)
V4mpiro Apex Tech Fanatic	I dont know if this is going to be 10 when it is shipped internationaly, but here is one from Xoxide http://www.xoxide.com/40evbalbearf.html

09-June-03, 05:44 PM		#3 (permalink)
Buzz_4_20 Apex Elite Tech	here's one http://store.yahoo.com/nexfan03/sade40suchfa.html 40x40x28 at 10,000rpm's 13.8CFM you also might wan't to consider a standard case fan with a bracket to blow on the Chipset HSF it's quieter and put out more air, also cools off more of the board.

09-June-03, 07:55 PM		#4 (permalink)
eldiablo Apex Techie II	Cool thanks Anyone maybe know of a 60->40mm adapter? Or do I have to make one