best best what would jesus buy?

makkunbakkun · 22-April-03, 10:42 PM

ok i dont want a SK heatsink..........
i want a heatsink that i dont have to screw into mobo
i want a heatsink that will last for at least 2 years
i want the best heatsink that fits these descriptions....
i would prolly use a tornado fan
dont worry about money
what would jesus buy if this was what he wanted?
pls help

thx guys~

TheOutcast · 22-April-03, 10:49 PM

SK-7 doesn't require mobo screwing... nor does the correct SLK-800.

But my suggestion is a Vantec Aeroflow... you won't need the tornado fan, and it's supposed to be a very good cooler for being a HSF combo and not just a HS and let the user decide on fan..

Buzz_4_20 · 22-April-03, 10:49 PM

I'd say a water cooling setup....
if price and noise isn't an option i'd go for the swiftech 462+T cooler.....

scapegoat · 22-April-03, 10:49 PM

Well seeing as how jesus is 2000 years old, and computers did not exist i dont think he would buy any of the above.

But what -I- would buy would be the SK-7 or the SLK-800 .

EDIT- i will also second Outcasts opnion, i have an Aeroflow heatsink as well, and they provide very decent cooling at a low noise level

makkunbakkun · 22-April-03, 10:59 PM

well i want air cooling too..........but i want the COOLEST POSSIBLE..i dont really care that much about noise if i wanted a tornado fan ^_^

Buzz_4_20 · 22-April-03, 11:03 PM

my aeroflow keeps my 2400+ under 115f at all times, even when it's oc'd running prime95...
the 462+T is a HSF with a TEC - Peltier.....

EDIT 115f is 46ish in Celcius

makkunbakkun · 22-April-03, 11:05 PM

conversion from celcius to farenheigt please?ty

makkunbakkun · 22-April-03, 11:19 PM

dont those big thermalright heatsinks put stress on the cpu..that was really the only thing i was worried about the SK series.....feedback thx guys

makkunbakkun · 22-April-03, 11:21 PM

oh yea.......my friend said swiftechs were really good...feedback there?

makkunbakkun · 22-April-03, 11:25 PM

which is the best sk that doesnt require screwing in? (amd)

scapegoat · 22-April-03, 11:27 PM

Any Heatsink can can put stress on a CPU if its put on wrong,

The SLK-800 can put a little stress on the CPU if not installed right,because it doesnt touch the standoff pads on the proccesser( the little black pads at the four corners) This is why the 800 comes with its own standoff you install on the HSF....as long as those are on you should be fine

corruptjoker · 22-April-03, 11:29 PM

My volcano 9 with the fan on high all the time keeps my 2600+ at about 91F

makkunbakkun · 23-April-03, 04:18 PM

went to newegg.........
got a slk-800 A
arctic silver 3
tornado 80 80 38

~~~~~~~~~~~~~
74$ with shippiung(14)

lets hope its good ^_^ thx guys

Jonny English · 23-April-03, 04:47 PM

Quote:


	Originally posted by scapegoat ... i dont think he would buy any of the above...

... because he'd go water cooled. Of course, he'd have to change the water regularly, as it would keep turning into wine

makkunbakkun · 23-April-03, 07:43 PM

haha nice ~ water to wine~ and then to semen

makkunbakkun · 23-April-03, 07:47 PM

any idea you guys got i got a 2400+ and good airflow in my cpu....
with
slk-800 A
arctic silver 3
tornado 80 80 38

how high do you think i could push my ghz to with that ?

neotheducky · 23-April-03, 08:41 PM

Quote:


	Originally posted by makkunbakkun haha nice ~ water to wine~ and then to semen

Where the heck did "semen" come from?

makkunbakkun · 23-April-03, 08:47 PM

dont worry about what i was doing at the time of that post

ZENNZZO · 23-April-03, 09:54 PM

Forgive him Lord, for he knows not what he's doing...A-men

Jonny English · 24-April-03, 04:14 AM

Quote:


	Originally posted by makkunbakkun dont worry about what i was doing at the time of that post

You were bopping your baloney over a thread on _heatsinks_? Ew, I feel dirty - must take a shower.

22-April-03, 10:42 PM		#1 (permalink)
makkunbakkun Apex Techie II	best best what would jesus buy? ok i dont want a SK heatsink.......... i want a heatsink that i dont have to screw into mobo i want a heatsink that will last for at least 2 years i want the best heatsink that fits these descriptions.... i would prolly use a tornado fan dont worry about money what would jesus buy if this was what he wanted? pls help thx guys~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jesus Christ: The Musical	luckybob	Sock and Feather	1	09-February-06 09:47 PM
Is the 360 Cooler Then Jesus?	Fatsobob	Anything Goes	27	21-January-06 01:25 AM
Jesus Christ: The musical	luckybob	Anything Goes	0	16-January-06 12:58 AM
Anyone else think Baby Jesus looks like a Rugrat?	KraftMayo	Anything Goes	7	12-June-05 09:06 PM
Jesus Saves!	G Money	Anything Goes	20	27-August-03 02:35 PM

22-April-03, 10:49 PM		#2 (permalink)
TheOutcast Minnes-hoe-tan	SK-7 doesn't require mobo screwing... nor does the correct SLK-800. But my suggestion is a Vantec Aeroflow... you won't need the tornado fan, and it's supposed to be a very good cooler for being a HSF combo and not just a HS and let the user decide on fan..

22-April-03, 10:49 PM		#3 (permalink)
Buzz_4_20 Apex Elite Tech	I'd say a water cooling setup.... if price and noise isn't an option i'd go for the swiftech 462+T cooler.....

22-April-03, 10:49 PM		#4 (permalink)
scapegoat Apex Tech God	Well seeing as how jesus is 2000 years old, and computers did not exist i dont think he would buy any of the above. But what -I- would buy would be the SK-7 or the SLK-800 . EDIT- i will also second Outcasts opnion, i have an Aeroflow heatsink as well, and they provide very decent cooling at a low noise level

22-April-03, 10:59 PM		#5 (permalink)
makkunbakkun Apex Techie II	well i want air cooling too..........but i want the COOLEST POSSIBLE..i dont really care that much about noise if i wanted a tornado fan ^_^

22-April-03, 11:03 PM		#6 (permalink)
Buzz_4_20 Apex Elite Tech	my aeroflow keeps my 2400+ under 115f at all times, even when it's oc'd running prime95... the 462+T is a HSF with a TEC - Peltier..... EDIT 115f is 46ish in Celcius

22-April-03, 11:05 PM		#7 (permalink)
makkunbakkun Apex Techie II	conversion from celcius to farenheigt please?ty

22-April-03, 11:19 PM		#8 (permalink)
makkunbakkun Apex Techie II	dont those big thermalright heatsinks put stress on the cpu..that was really the only thing i was worried about the SK series.....feedback thx guys

22-April-03, 11:21 PM		#9 (permalink)
makkunbakkun Apex Techie II	oh yea.......my friend said swiftechs were really good...feedback there?

22-April-03, 11:25 PM		#10 (permalink)
makkunbakkun Apex Techie II	which is the best sk that doesnt require screwing in? (amd)

22-April-03, 11:27 PM		#11 (permalink)
scapegoat Apex Tech God	Any Heatsink can can put stress on a CPU if its put on wrong, The SLK-800 can put a little stress on the CPU if not installed right,because it doesnt touch the standoff pads on the proccesser( the little black pads at the four corners) This is why the 800 comes with its own standoff you install on the HSF....as long as those are on you should be fine

22-April-03, 11:29 PM		#12 (permalink)
corruptjoker Decept-Hoe-Con	My volcano 9 with the fan on high all the time keeps my 2600+ at about 91F

23-April-03, 04:18 PM		#13 (permalink)
makkunbakkun Apex Techie II	went to newegg......... got a slk-800 A arctic silver 3 tornado 80 80 38 ~~~~~~~~~~~~~ 74$ with shippiung(14) lets hope its good ^_^ thx guys

23-April-03, 07:43 PM		#15 (permalink)
makkunbakkun Apex Techie II	haha nice ~ water to wine~ and then to semen

23-April-03, 07:47 PM		#16 (permalink)
makkunbakkun Apex Techie II	any idea you guys got i got a 2400+ and good airflow in my cpu.... with slk-800 A arctic silver 3 tornado 80 80 38 how high do you think i could push my ghz to with that ?

23-April-03, 08:47 PM		#18 (permalink)
makkunbakkun Apex Techie II	dont worry about what i was doing at the time of that post

23-April-03, 09:54 PM		#19 (permalink)
ZENNZZO Direct Cool Hoe	Forgive him Lord, for he knows not what he's doing...A-men