+4200 x2 temps

ckirsh · 06-October-07, 04:01 AM

hello,
temp on 4200 x2 is 47*c idle.don know what it is at load.
hesitant to see what load is in case cpu is defective.
i re-seated the the heatsink/fan with fresh arctic silver5 and-
temp has not changed.sandra/everest/abit temp utility all stay-
between 47.1-47.7*c.
im using antec hs/fan.don remember the model.
i took off the panel and still no temp change.
my +4000 sandy was cooler.
anyone with 4200x2 have these temps?
do these dualcore cpu's just run warmer?
thanx

reflux · 06-October-07, 06:03 AM

Use CoreTemp to measure the temperature. It's more accurate.

Core Temp

Fred_G · 06-October-07, 09:43 AM

Your temps do seem kinda high. I am not sure what the max temp is on these chips. I have both of my cores at 100% and my temps are 50Ã‚Â°C on one core, and 48Ã‚Â°C on the other with an ambient temp of 24Ã‚Â°.

You might try a house fan blowing into the side with the side panel off. If that helps, you may need beter airflow, if it does not, I would look into the heatsink mounting and such.

Also, what is the ambient temperature? You should also check out the program reflux linked to. Seems pretty neat. Shows my temps about 5 degrees higher than Everest does... I will have to look into that.

E

ckirsh · 06-October-07, 01:16 PM

thanx.core temps-
core 0 is 46*c
core 1 is 25*c
id think both cores be the same temp?

reflux · 06-October-07, 01:47 PM

Quote:

Originally Posted by ckirsh


	thanx.core temps- *core 0 is 46c core 1 is 25c* id think both cores be the same temp?

Are those under load or at idle? Use an application such as Orthos or OCCT to stress your PC to 100% load.

The descrepancy between core temperatures is definitely strange. The cores in my Q6600 can vary by about 6c, but nothing like what your getting. How did you apply the AS5? Make sure you do it according to the instructions.

Arctic Silver Incorporated - Arctic Silver 5 Instructions

ckirsh · 06-October-07, 02:11 PM

srry,these temps are idle.
applied as5 per dir on as www.
getting ready to run orthos.ill try the other also.
somethings up tho as my ram is getting errors on memtest.
got an error at 33%133%233% before i got bent and shut it down.
ill get to that after the cpu.
ill post orthos results ina bit.
thnx reflux

ckirsh · 06-October-07, 05:53 PM

ok,i ran orthos 1st cpu torture test-30 min
core#0 59*c
core#1 51*c no errors/no crash

orthos ram stress test-30 min
core#0 60*c
core#1 51*c no error/no crash

ran occt-60 min
core #0 61*c
core#1 56*c no error/no crash
occt says stable

how these temps look??my hs/fan not working efficiently?
going to reseat hs/fan again.
btw i am using the most upto date bios from abit
ima run 3dmark next

Chrome_Rust · 06-October-07, 06:09 PM

I wish i had load temps like that. my 6k @ stock on water idles at 50c. and yes the block is square.

ckirsh · 08-October-07, 06:16 PM

hello,
i got new cooling otw Scythe MINE Rev.B 3 Heat Pipes CPU Cooler SCMN-1100 for Intel Socket 775/478 AMD Socket AM2/940/939/754 CPU Scythe CPU Cooler-Best Computer Online Store Houston Buy Discount Prices Texas-Directron.com
wanted to get turiq 120 but the weight scared me off heh.

but heres reason for my post..i changed fsb to 205mhz and temp dropped on core 0#to 44*c and core 1#to 23*c ..these using core temp
anyone seen this? edit .these temps are idle

06-October-07, 04:01 AM		#1 (permalink)
ckirsh Apex Techie Lite	+4200 x2 temps hello, *temp on 4200 x2 is 47c idle.don know what it is at load. hesitant to see what load is in case cpu is defective. i re-seated the the heatsink/fan with fresh arctic silver5 and- temp has not changed.sandra/everest/abit temp utility all stay- between 47.1-47.7c.* im using antec hs/fan.don remember the model. i took off the panel and still no temp change. my +4000 sandy was cooler. anyone with 4200x2 have these temps? do these dualcore cpu's just run warmer? thanx

06-October-07, 06:03 AM		#2 (permalink)
reflux Sempr0n?	Re: +4200 x2 temps Use CoreTemp to measure the temperature. It's more accurate. Core Temp

06-October-07, 09:43 AM		#3 (permalink)
Fred_G !! Sm-hoe-k Free !!	Re: +4200 x2 temps Your temps do seem kinda high. I am not sure what the max temp is on these chips. I have both of my cores at 100% and my temps are 50Ã‚Â°C on one core, and 48Ã‚Â°C on the other with an ambient temp of 24Ã‚Â°. You might try a house fan blowing into the side with the side panel off. If that helps, you may need beter airflow, if it does not, I would look into the heatsink mounting and such. Also, what is the ambient temperature? You should also check out the program reflux linked to. Seems pretty neat. Shows my temps about 5 degrees higher than Everest does... I will have to look into that. E

06-October-07, 01:16 PM		#4 (permalink)
ckirsh Apex Techie Lite	Re: +4200 x2 temps thanx.core temps- *core 0 is 46c core 1 is 25c* id think both cores be the same temp?

06-October-07, 02:11 PM		#6 (permalink)
ckirsh Apex Techie Lite	Re: +4200 x2 temps srry,these temps are idle. applied as5 per dir on as www. getting ready to run orthos.ill try the other also. somethings up tho as my ram is getting errors on memtest. got an error at 33%133%233% before i got bent and shut it down. ill get to that after the cpu. ill post orthos results ina bit. thnx reflux

06-October-07, 05:53 PM		#7 (permalink)
ckirsh Apex Techie Lite	Re: +4200 x2 temps ok,i ran orthos 1st cpu torture test-30 min *core#0 59c core#1 51c no errors/no crash* orthos ram stress test-30 min *core#0 60c core#1 51c no error/no crash* ran occt-60 min *core #0 61c core#1 56c no error/no crash* occt says stable how these temps look??my hs/fan not working efficiently? going to reseat hs/fan again. btw i am using the most upto date bios from abit ima run 3dmark next

06-October-07, 06:09 PM		#8 (permalink)
Chrome_Rust Apex Tech God	Re: +4200 x2 temps I wish i had load temps like that. my 6k @ stock on water idles at 50c. and yes the block is square.

08-October-07, 06:16 PM		#9 (permalink)
ckirsh Apex Techie Lite	Re: +4200 x2 temps hello, i got new cooling otw Scythe MINE Rev.B 3 Heat Pipes CPU Cooler SCMN-1100 for Intel Socket 775/478 AMD Socket AM2/940/939/754 CPU Scythe CPU Cooler-Best Computer Online Store Houston Buy Discount Prices Texas-Directron.com wanted to get turiq 120 but the weight scared me off heh. *but heres reason for my post..i changed fsb to 205mhz and temp dropped on core 0#to 44c and core 1#to 23c ..these using core temp* anyone seen this? edit .these temps are idle Last edited by ckirsh; 08-October-07 at 06:18 PM.. Reason: add info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
X2 4200 Oc	GrandpaNoob72	AMD CPU/Motherboard OC	7	30-May-06 11:30 PM
Ti 4200 drivers	godfoot	Video Cards	9	19-November-04 08:12 PM
MSI Geforce 4 TI 4200	Erad	Video Cards	8	05-December-03 09:31 AM
OC GeForce 4 TI 4200 and ATI	Rock	Video Cards	7	05-May-03 02:22 AM
Ti 4200 dying	NoSlak	Video Cards	22	23-December-02 04:16 AM