175 cfm 120mm fan.

Seyeklopz · 16-February-07, 11:19 PM

Thought someone might like one of these for extreme air/water/pelt cooling.

Mechatronics 120mm x 38mm High CFM fan # MD1238H12B

Dual Ball Bearing High Volume Air Flow, DC12V/ 2.50 A (30 watts, wow)

Size	120x120x38mm
Air Flow	174 CFM
Noise	57.8 dba
Connector	3 pin/ no RPM
RPM	3800
Model	MD1238H

Look closely, it has stator blades to turn wasted spinning air into more cfm.

killert · 16-February-07, 11:23 PM

Bet those will take off a finger.

Iateronmly · 16-February-07, 11:33 PM

Hmm - how about 190cfm at nearly the same noise and size?

Delta 120x38mm FFB1212EHE

Specifications: 120x120x38mm, -->190.00<-- CFM @ 4000 RPM, 59.0 dBA, 24.00 watts, 2.00 amps, 12v DC, 3+4 pin Molex connectors.

Or we could get crazy with this puppy. 120x76mm

Delta 120x76mm GFB1212VHW

Specifications: 120x120x76mm, 220.29 CFM @ 3550/3200 RPM, 59.0 dBA, 31.80 watts, 2.65 amps, Maximum Air Pressure 15.04 mm HÃ‚Â²O, 12v DC, 3+4 pin Molex header connector(s) or Bare Wire. ($1.00 discount)

I like big fans and I cannot lie, other modders might deny when a case walks in with an itty bitty chassis and a big round thing in your face you get sprung.

killert · 16-February-07, 11:35 PM

Quote:

Originally Posted by Iateronmly


	Hmm - how about 190cfm at nearly the same noise and size? Delta 120x38mm FFB1212EHE Specifications: 120x120x38mm, -->190.00<-- CFM @ 4000 RPM, 59.0 dBA, 24.00 watts, 2.00 amps, 12v DC, 3+4 pin Molex connectors.

I know what fan I'm buying for my Big Typhoon next

Seyeklopz · 16-February-07, 11:46 PM

Wow, dual motor.. and more cfm than my 160mm die cast aluminum fan.

Quote:


	Or we could get crazy with this puppy. 120x76mm Delta 120x76mm GFB1212VHW Specifications: 120x120x76mm, 220.29 CFM @ 3550/3200 RPM, 59.0 dBA, 31.80 watts, 2.65 amps, Maximum Air Pressure 15.04 mm HÃ‚Â²O, 12v DC, 3+4 pin Molex header connector(s) or Bare Wire. ($1.00 discount)

Hak Foo · 17-February-07, 12:53 AM

And seconds minutes later, your mainboard headers burn out and you're left with 0 cfm.

I always liked the 120cfm 120mm fans... they made such a lovely whine when they start up, but aside from that, the noise is maddening.

4x0n · 17-February-07, 06:45 AM

Quote:

Originally Posted by Iateronmly


	Delta 120x76mm GFB1212VHW Specifications: 120x120x76mm, 220.29 CFM @ 3550/3200 RPM, 59.0 dBA, 31.80 watts, 2.65 amps, Maximum Air Pressure 15.04 mm HÃ‚Â²O, 12v DC, 3+4 pin Molex header connector(s) or Bare Wire. ($1.00 discount) I like big fans and I cannot lie, other modders might deny when a case walks in with an itty bitty chassis and a big round thing in your face you get sprung.

So, 11 of these, 9 on a CM Stacker 830/832 and 2 on the CM Gemini II = extremely loud but extremely cool case? Any volunteers?

Zaltan · 17-February-07, 07:29 AM

59dba on those Delta's is insane. I think the loudest thing in my computer is 33 ATM.

AntiM · 17-February-07, 08:45 AM

Missing:

Aluminum Fragbox with 8 Delta 120x76's installed. Last seen headed East at 8,000 ft. and traveling at 170 mph. If seen do not approach, call the local authorities.

Zaltan · 17-February-07, 08:51 AM

Quote:

Originally Posted by AntiM


	Missing: Aluminum Fragbox with 8 Delta 120x76's installed. Last seen headed East at 8,000 ft. and traveling at 170 mph. If seen do not approach, call the local authorities.

hahaha

s1ugh34d · 17-February-07, 10:51 AM

What about the 265CFM 150mm fan from frozenCPU, thats what i want

Air Flow: 265.1 CFM (7.51 m3/min)
Pressure: 0.51 in H2O (12.84 mmAq)
Fan Speed: 2900 RPM
Noise Level: 54.4 dBA

not even as noisy as those deltas, and they sell the 120mm -- > 150mm adapter

Seyeklopz · 17-February-07, 04:06 PM

Hard to find 12v fans this size.

12VDC 6.75" COOLING FAN | All Electronics Corp - Parts, Supplies and Components

Comair Rotron "Major™" JQ12ROX. 12 Vdc, 2.26 Amps. 6.75" x 5.92" x 2." 235 CFM ball bearing cooling fan. Four wires. Fuse and polarity protected. Metal housing. Polycarbonate impeller.

Iateronmly · 17-February-07, 05:54 PM

Quote:

Originally Posted by s1ugh34d


	What about the 265CFM 150mm fan from frozenCPU, thats what i want Air Flow: 265.1 CFM (7.51 m3/min) Pressure: 0.51 in H2O (12.84 mmAq) Fan Speed: 2900 RPM Noise Level: 54.4 dBA not even as noisy as those deltas, and they sell the 120mm -- > 150mm adapter

How about this then.

DC Fan Search Results - Comair Rotron

16-February-07, 11:23 PM		#2 (permalink)
killert Apex Tech God	Re: 175 cfm 120mm fan. Bet those will take off a finger.

16-February-07, 11:33 PM		#3 (permalink)
Iateronmly Smooth Operator	Re: 175 cfm 120mm fan. Hmm - how about 190cfm at nearly the same noise and size? Delta 120x38mm FFB1212EHE Specifications: 120x120x38mm, -->190.00<-- CFM @ 4000 RPM, 59.0 dBA, 24.00 watts, 2.00 amps, 12v DC, 3+4 pin Molex connectors. Or we could get crazy with this puppy. 120x76mm Delta 120x76mm GFB1212VHW Specifications: 120x120x76mm, 220.29 CFM @ 3550/3200 RPM, 59.0 dBA, 31.80 watts, 2.65 amps, Maximum Air Pressure 15.04 mm HÃ‚Â²O, 12v DC, 3+4 pin Molex header connector(s) or Bare Wire. ($1.00 discount) I like big fans and I cannot lie, other modders might deny when a case walks in with an itty bitty chassis and a big round thing in your face you get sprung.

17-February-07, 12:53 AM		#6 (permalink)
Hak Foo Apex Elite Tech	Re: 175 cfm 120mm fan. And seconds minutes later, your mainboard headers burn out and you're left with 0 cfm. I always liked the 120cfm 120mm fans... they made such a lovely whine when they start up, but aside from that, the noise is maddening.

17-February-07, 07:29 AM		#8 (permalink)
Zaltan Apex Tech God	Re: 175 cfm 120mm fan. 59dba on those Delta's is insane. I think the loudest thing in my computer is 33 ATM.

17-February-07, 08:45 AM		#9 (permalink)
AntiM Aqua Pimp	Re: 175 cfm 120mm fan. Missing: Aluminum Fragbox with 8 Delta 120x76's installed. Last seen headed East at 8,000 ft. and traveling at 170 mph. If seen do not approach, call the local authorities.

17-February-07, 10:51 AM		#11 (permalink)
s1ugh34d Apex Tech God	Re: 175 cfm 120mm fan. What about the 265CFM 150mm fan from frozenCPU, thats what i want Air Flow: 265.1 CFM (7.51 m3/min) Pressure: 0.51 in H2O (12.84 mmAq) Fan Speed: 2900 RPM Noise Level: 54.4 dBA not even as noisy as those deltas, and they sell the 120mm -- > 150mm adapter

17-February-07, 04:06 PM		#12 (permalink)
Seyeklopz Apex Tech Fanatic Supreme	Re: 175 cfm 120mm fan. Hard to find 12v fans this size. 12VDC 6.75" COOLING FAN \| All Electronics Corp - Parts, Supplies and Components Comair Rotron "Major™" JQ12ROX. 12 Vdc, 2.26 Amps. 6.75" x 5.92" x 2." 235 CFM ball bearing cooling fan. Four wires. Fuse and polarity protected. Metal housing. Polycarbonate impeller.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: 120mm fan	swtguy	Trading Post	1	16-June-06 09:16 PM
WTB: 120mm fan	General	Trading Post	4	05-October-04 03:04 AM
Best 120mm?	Vash_The_Stampede	Case Cooling	2	23-October-03 04:18 PM
best 120mm fan	vladimir	Heatsinks / fans	11	19-October-03 08:17 PM
120mm fan on sk-7?	me_john85	Heatsinks / fans	3	02-August-03 05:11 AM