I am going INSANE!

THRASHER2 · 22-December-06, 04:28 AM

I have a ASUS P5ND2 -Sli Mobo
Intel Penium D 820 CPU
Corsair DDR2 5400 x2 512 = 1gig
Video card Ati X850XT 256mb
80gig HD
430watt Tt PSU

CPU-Z Validator Database

I get it pass 3500mhz without it CRASHING

T2 needs your Help

PurpleDiamond · 22-December-06, 11:00 AM

What are the voltages, mem timing and cpu cooler?

I swaped my Intel 630 with a 945 and that thing is a furnace - It runs really hot. I can't reach the overclock that I wanted because the temps are through the roof. The only way I would be able to break 4.2GHz would be with water or phase change. Netburst Intel dual core =

GlitterKill · 22-December-06, 11:57 AM

That was my initial thought. You left out what you are cooling with.

Stock voltage?

$SOLID$ Necro · 24-December-06, 04:58 AM

Can u enable EIST on that cpu/mbo? (Enhanced speed step)

If so..then you can drop the multiplier..and ramp up the FSB.

What you need to do is tune in the board so you max out fsb speed, and then, you can go back to the stock multiplier and ramp it up again.

Also..Intel has a weird "Strap" dealio that is kind hard to understand.

it has to do with your memory divider...I'm sending u links over MSN.

22-December-06, 04:28 AM		#1 (permalink)
THRASHER2 PCApex Newscaster	I am going INSANE! I have a ASUS P5ND2 -Sli Mobo Intel Penium D 820 CPU Corsair DDR2 5400 x2 512 = 1gig Video card Ati X850XT 256mb 80gig HD 430watt Tt PSU CPU-Z Validator Database I get it pass 3500mhz without it CRASHING T2 needs your Help

22-December-06, 11:00 AM		#2 (permalink)
PurpleDiamond Apex Tech Maniac Supreme	Re: I am going INSANE! What are the voltages, mem timing and cpu cooler? I swaped my Intel 630 with a 945 and that thing is a furnace - It runs really hot. I can't reach the overclock that I wanted because the temps are through the roof. The only way I would be able to break 4.2GHz would be with water or phase change. Netburst Intel dual core =

22-December-06, 11:57 AM		#3 (permalink)
GlitterKill Pimp-of-all-Pimps	Re: I am going INSANE! That was my initial thought. You left out what you are cooling with. Stock voltage?

24-December-06, 04:58 AM		#4 (permalink)
$SOLID$ Necro Mastah Overclocker	Re: I am going INSANE! Can u enable EIST on that cpu/mbo? (Enhanced speed step) If so..then you can drop the multiplier..and ramp up the FSB. What you need to do is tune in the board so you max out fsb speed, and then, you can go back to the stock multiplier and ramp it up again. Also..Intel has a weird "Strap" dealio that is kind hard to understand. it has to do with your memory divider...I'm sending u links over MSN.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help a guy from going insane!!!	Darksamurai	Anything Goes	10	18-November-05 01:21 PM
Going Insane need fresh help!	DuckWarrior	Motherboards / CPUs	6	03-July-05 05:52 PM
Insane Mod!!	j-dogg	Anything Goes	21	02-March-04 11:42 PM
i am going insane...	Fu3lman	Trading Post	11	20-March-03 11:41 AM
More Insane Mods	FunkyFresh	Case Modding	7	06-November-02 08:43 PM