Liquid Cooling Kits Where?

hardwaregEEk · 11-August-03, 10:11 AM

I need a good liquid cooling kits with is complete and is effective.. What i mean by complete is that it has all the parts i need to get started the reservoir, cpu blocks, pump, and THICH tubing... but the block should have clips because i am not going to bolt it down.

AntiM · 11-August-03, 11:04 AM

DangerDen should fill your requirements. A socket tab mount is available as an option. Just avoid the cylinder res.

Innovatek probably has the best tab mount blocks. No thick tubing though.

Banana Boy · 11-August-03, 11:40 AM

I recommend the Koolance Exos. It's a great kit with great performance, although I recommend you use a different block than stock.

Arkangyl · 11-August-03, 05:15 PM

FYI the Exos is external and does NOT come with a waterblock. You'd be better off going Danger Den, they offer kits

www.frozencpu.com go under the liquid cooling tab and select kits, I believe DD has one and the swiftec ones arnt bad ether

Banana Boy · 11-August-03, 05:22 PM

Yeah the EXOS is an EXTERNAL KIT, just purchase a waterblock. I don't recommend the koolance block that they encourage you to buy, but instead go for something better. The EXOS is a great performer and I will be purchasing one for myself shortly.

swanny321 · 11-August-03, 07:39 PM

www.svc.com or www.sidewinder.com

putwig · 11-August-03, 08:55 PM

If you really want an all inclusive no brainer kit that uses socket lugs for mounting, I would can your desire for thick tubing, and get the Innovatech set.

Edit:

Actually, Banana's idea of an Exos coupled with an Innovatech Rev 3 would be awesome if you want really simple external watercooling!

AntiM · 11-August-03, 09:40 PM

I agree. You can always go with the tygon available from HighspeedPC if you want high grade tubing.

11-August-03, 10:11 AM		#1 (permalink)
hardwaregEEk Apex Master Tech Apprentice	Liquid Cooling Kits Where? I need a good liquid cooling kits with is complete and is effective.. What i mean by complete is that it has all the parts i need to get started the reservoir, cpu blocks, pump, and THICH tubing... but the block should have clips because i am not going to bolt it down.

11-August-03, 08:55 PM		#7 (permalink)
putwig Dr. Hydro Pimp	If you really want an all inclusive no brainer kit that uses socket lugs for mounting, I would can your desire for thick tubing, and get the Innovatech set. Edit: Actually, Banana's idea of an Exos coupled with an Innovatech Rev 3 would be awesome if you want really simple external watercooling! Last edited by putwig; 11-August-03 at 09:02 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FrozenCPU // Innovatek Water Cooling Kits (Socket A / 478 / 754 / 939 / 940)	Gizmo	Vendor News RSS	0	23-June-05 03:22 AM
FrozenCPU // Innovatek Water Cooling Kits	Gizmo	Vendor News RSS	0	11-June-05 03:20 AM
FrozenCPU // The Swiftech Revision 3 Water Cooling Kits Are Here!	Gizmo	Vendor News RSS	0	04-December-04 01:36 AM
FrozenCPU // The Innovatek water cooling kits have arrived!	Gizmo	Vendor News RSS	0	24-November-04 07:21 PM
FrozenCPU // The mighty Innovatek water cooling kits have arrived!	Gizmo	Vendor News RSS	0	24-November-04 01:21 AM

11-August-03, 11:04 AM		#2 (permalink)
AntiM Aqua Pimp	DangerDen should fill your requirements. A socket tab mount is available as an option. Just avoid the cylinder res. Innovatek probably has the best tab mount blocks. No thick tubing though.

11-August-03, 11:40 AM		#3 (permalink)
Banana Boy Apex Tech Maniac Supreme	I recommend the Koolance Exos. It's a great kit with great performance, although I recommend you use a different block than stock.

11-August-03, 05:15 PM		#4 (permalink)
Arkangyl Hoe-lier than Thou	FYI the Exos is external and does NOT come with a waterblock. You'd be better off going Danger Den, they offer kits www.frozencpu.com go under the liquid cooling tab and select kits, I believe DD has one and the swiftec ones arnt bad ether

11-August-03, 05:22 PM		#5 (permalink)
Banana Boy Apex Tech Maniac Supreme	Yeah the EXOS is an EXTERNAL KIT, just purchase a waterblock. I don't recommend the koolance block that they encourage you to buy, but instead go for something better. The EXOS is a great performer and I will be purchasing one for myself shortly.

11-August-03, 07:39 PM		#6 (permalink)
swanny321 Apex Tech Fanatic	www.svc.com or www.sidewinder.com

11-August-03, 09:40 PM		#8 (permalink)
AntiM Aqua Pimp	I agree. You can always go with the tygon available from HighspeedPC if you want high grade tubing.