White Water Cascade

AntiM · 14-July-03, 01:50 AM

Thought you guys might want to see the latest and greatest from Down Under. I'm on the waiting list for one.

*drool*

AntiM · 14-July-03, 01:52 AM

I see holes.

AntiM · 14-July-03, 01:52 AM

Lot's of itty bitty holes.

AntiM · 14-July-03, 01:54 AM

And pits. Lot's of pits.

AntiM · 14-July-03, 01:55 AM

Kinda like a shower head.

AntiM · 14-July-03, 01:57 AM

Don't tell Zennzzo....he'll wanna glue one on a cpu.

hmmm

Rokk1972 · 14-July-03, 03:37 AM

As of now that is the waterblock to have!! Cather has done a great job on researching and development on his waterblocks. I was thinking of getting on the waiting list to have him pop one out for me, but then decided on making my own waterblock. BTW I have receiced my D-tek barbed o-ring fittings that i will be using on my block. And hopefully I will have the copper machiend out by this upcoming weekend.

Banana Boy · 14-July-03, 04:59 AM

Man you boys are getting into extreme mods. I'm still down here with my custom windows and LCD, and your all the way into custom building water blocks. Damn I gotta catch up to you guys. *goes out and buys a block of copper and starts ****ing it up in an attempt to make a waterblock and cries in frustration*.

Lord_nikon · 14-July-03, 06:52 AM

I did always think that water-blocks needed to be researched further than thier basic principals and then adding in some grooves for the water to run thru.
I saw quite some design diferences from the Maze-3 when I bought my new maze4. Cant comment on the new temps because my rig is down for maintanence.....(pump busted...waiting for new hardware.
That dose look like quite an advancement in stepping up the turbulence..

ZENNZZO · 14-July-03, 08:21 AM

Ben there, done that, got the T-shirt, who's been peeking?

Lord_nikon · 14-July-03, 09:46 AM

Y'now I just realized I dont get how a 3 barbed waterblock is supposed to work.....where do the 2 hoses go into which the water goes "out"?

AntiM · 14-July-03, 11:08 AM

In a three barb design water enters in the center directly over the core. And exits out the other two. In Cathar's designs it isn't really an essential cooling feature, more a design convenience. You'll notice in the above design he has dropped the third barb in the final design. (first pic)

The tubing from the two barbs in the Original White Water hooks to a wye and back into a single tube. Or better, to two seperate barbs on a res. But it's really the inpingement and the micro channels that do the cooling. The Cascade above is a pure inpingement cooler.

14-July-03, 01:50 AM		#1 (permalink)
AntiM Aqua Pimp	White Water Cascade Thought you guys might want to see the latest and greatest from Down Under. I'm on the waiting list for one. drool Attached Thumbnails

14-July-03, 01:52 AM		#2 (permalink)
AntiM Aqua Pimp	I see holes. Attached Thumbnails

14-July-03, 01:52 AM		#3 (permalink)
AntiM Aqua Pimp	Lot's of itty bitty holes. Attached Thumbnails

14-July-03, 01:54 AM		#4 (permalink)
AntiM Aqua Pimp	And pits. Lot's of pits. Attached Thumbnails

14-July-03, 01:55 AM		#5 (permalink)
AntiM Aqua Pimp	Kinda like a shower head. Attached Thumbnails

14-July-03, 01:57 AM		#6 (permalink)
AntiM Aqua Pimp	Don't tell Zennzzo....he'll wanna glue one on a cpu. hmmm

14-July-03, 03:37 AM		#7 (permalink)
Rokk1972 Apex Advanced Techie	As of now that is the waterblock to have!! Cather has done a great job on researching and development on his waterblocks. I was thinking of getting on the waiting list to have him pop one out for me, but then decided on making my own waterblock. BTW I have receiced my D-tek barbed o-ring fittings that i will be using on my block. And hopefully I will have the copper machiend out by this upcoming weekend.

14-July-03, 04:59 AM		#8 (permalink)
Banana Boy Apex Tech Maniac Supreme	Man you boys are getting into extreme mods. I'm still down here with my custom windows and LCD, and your all the way into custom building water blocks. Damn I gotta catch up to you guys. goes out and buys a block of copper and starts **ing it up in an attempt to make a waterblock and cries in frustration.

14-July-03, 06:52 AM		#9 (permalink)
Lord_nikon Apex Tech Fanatic Supreme	I did always think that water-blocks needed to be researched further than thier basic principals and then adding in some grooves for the water to run thru. I saw quite some design diferences from the Maze-3 when I bought my new maze4. Cant comment on the new temps because my rig is down for maintanence.....(pump busted...waiting for new hardware. That dose look like quite an advancement in stepping up the turbulence..

14-July-03, 08:21 AM		#10 (permalink)
ZENNZZO Direct Cool Hoe	Ben there, done that, got the T-shirt, who's been peeking?

14-July-03, 09:46 AM		#11 (permalink)
Lord_nikon Apex Tech Fanatic Supreme	Y'now I just realized I dont get how a 3 barbed waterblock is supposed to work.....where do the 2 hoses go into which the water goes "out"?

14-July-03, 11:08 AM		#12 (permalink)
AntiM Aqua Pimp	In a three barb design water enters in the center directly over the core. And exits out the other two. In Cathar's designs it isn't really an essential cooling feature, more a design convenience. You'll notice in the above design he has dropped the third barb in the final design. (first pic) The tubing from the two barbs in the Original White Water hooks to a wye and back into a single tube. Or better, to two seperate barbs on a res. But it's really the inpingement and the micro channels that do the cooling. The Cascade above is a pure inpingement cooler.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cascade CPU Water Block.	painfull	Extreme Cooling	3	04-February-06 03:19 AM
White Water VS Maze4 @gruntville.com	FeRaL	PC Apex Web News	1	18-November-03 12:04 PM
Swapped out my White water block	rcurtis	Extreme Cooling	8	07-September-03 12:27 PM
D-tek White Water Rapids	AntiM	Extreme Cooling	50	22-July-03 02:02 PM
White Water WB (detailed drawings)	Rokk1972	Extreme Cooling	7	08-May-03 12:57 PM