clowns watercooling ..DONE

vladimir · 03-July-03, 10:16 PM

well folks' its finally done......

today its been finally assembled and put together

pics:

http://67.84.163.202:808/accounts/cl...ter_installed/

and i have also managed to finally get to 3gh

167 fsb...i know i could be better, i still have to play around with it

its being cranky with the ram i think...cause i can boot on 180 and stuff, but then wen i get to windows all types of memory errors come up...i dont know why its pc3500 ... underclocked

would anybody know to what voltage i can push this p4 chip to? cause i have read sumwere they get cranky over 1.7 volt line..

TekXoID · 03-July-03, 10:36 PM

Nice work, really suave Clown

, looks good, interior of case could use some akasa pax mate.

Consider picking up some $5 HDD coolers to drop HDD temps to or below 30Ã‚Â°, and you can move one of the HDD's up into bottom CD-ROM bay with a 5Ã‚Â¼ to 3Ã‚Â½ converter to give them more breathing room.

Don't overvoltage past 1.6v, SNDC can and will happen d00d, and you are hearing this from someone who has had it happen thrice.

I have the same proc as you, PIV 2.4B, I can get to 184MHz FSB stable, 185MHz and no-boot, running 1.6v core, bah. I only get that speed because of my C1 core stepping, what stepping is yours?

EDIT: Update; I have a PIV 2.4C now and I get 280MHz FSB

Once again, great work d00d

vladimir · 03-July-03, 10:45 PM

eh those hdd coolers dont do ****, but increase noice, and bring dust in....

eh ive got a B0 stepping....second best

kinda sux, i would of lovee to have a C1 stepping chip

TekXoID · 03-July-03, 10:50 PM

Nope, my HDD's ran 35Ã‚Â°+ without em', both HDD's are running 29Ã‚Â° right now, with em'

Ah B0 is your limitation bro, you are lucky to even get near 180MHz

vladimir · 03-July-03, 11:04 PM

ah, well im happy that ive hit 3gh

im thinkin of getting anotehr system soon.....amd system

so ya LOL

putwig · 04-July-03, 05:57 AM

Very nice compact install!

What happened to the air trap?

vladimir · 04-July-03, 08:16 AM

well um, it had to go.....i couldnt place it after the pump, so i ended up removig it all together...

i have filled it so much, that i cannot see any movement of water in the tubes....

the only way i can tell that its working is hear the pump, and the little dirt thingie thats inside my waterblock LOL

ZENNZZO · 04-July-03, 07:50 PM

Can you still use the side cover with the radiator mounted there?

vladimir · 06-July-03, 12:09 PM

kinda....lol

i have to cut up the side a tad

Lord_nikon · 08-July-03, 11:24 AM

I cant acces your pics

Rewind · 08-July-03, 02:11 PM

yeah clown i can't see your photos and i would love to see them dude

vladimir · 08-July-03, 03:48 PM

sorry, server ip changed

see pics here http://67.84.163.202:808/accounts/cl...ter_installed/

and

putwig · 08-July-03, 04:30 PM

That is awfully high voltage for a northwood is it not?

TekXoID · 08-July-03, 05:09 PM

Quote:


	Originally posted by ClowN sorry, server ip changed see pics here http://67.84.163.202:808/accounts/cl...ter_installed/

Clown buddy you are killing that chip, don't say I didnt warn you when SNDS happens to it. Sudden Northwood Death Syndrome
What causes it? vCore past v1.6!

vladimir · 08-July-03, 05:53 PM

1.6 is friggin stock voltage

i did sum searching and um ppl say 1.75 is high

1.7 is fine...i dont know....

edit

i just rememberred i have 3 year warranty on this chip...

and i got it from newegg....so even if it dies, i should be able to get get a new one...i think

TekXoID · 08-July-03, 06:04 PM

Quote:


	Originally posted by ClowN 1.6 is friggin stock voltage i did sum searching and um ppl say 1.75 is high 1.7 is fine...i dont know.... edit i just rememberred i have 3 year warranty on this chip... and i got it from newegg....so even if it dies, i should be able to get get a new one...i think

I have had several chips, my own, and customers, die due to vcore between 1.6 and 1.8...wait and see for yourself.

neotheducky · 08-July-03, 06:23 PM

The three year warranty will most likely be voided if you use it outside of the guidelines set in the warranty. Almost every manufacturer only covers breakdowns from normal surcumstances. This means that it will not cover failures due to overclocking.

I stand with TekXoid (just this once

) in saying that you would be pushing it to up the voltage. And for what really? A few more points in 3dMark? I just dont think its worth losing a 150 dollar processor.

vladimir · 08-July-03, 06:59 PM

how would they know if i was ocin or it died by itself?

and gues wut SNDS happens from high fsb too...

TekXoID · 08-July-03, 07:11 PM

Not so Clown, where did you read that? People dont know what causes it so they assume.

High FSB does not cause SNDS

vladimir · 08-July-03, 07:35 PM

eh http://www.xbitlabs.com/news/cpu/display/news6375.html

misread it a big

03-July-03, 10:16 PM		#1 (permalink)
vladimir Pimp PHP Pro	clowns watercooling ..DONE well folks' its finally done...... today its been finally assembled and put together pics: http://67.84.163.202:808/accounts/cl...ter_installed/ and i have also managed to finally get to 3gh 167 fsb...i know i could be better, i still have to play around with it its being cranky with the ram i think...cause i can boot on 180 and stuff, but then wen i get to windows all types of memory errors come up...i dont know why its pc3500 ... underclocked would anybody know to what voltage i can push this p4 chip to? cause i have read sumwere they get cranky over 1.7 volt line.. Last edited by vladimir; 08-July-03 at 03:49 PM..

03-July-03, 10:36 PM		#2 (permalink)
TekXoID Banned	Nice work, really suave Clown , looks good, interior of case could use some akasa pax mate. Consider picking up some $5 HDD coolers to drop HDD temps to or below 30Ã‚Â°, and you can move one of the HDD's up into bottom CD-ROM bay with a 5Ã‚Â¼ to 3Ã‚Â½ converter to give them more breathing room. Don't overvoltage past 1.6v, SNDC can and will happen d00d, and you are hearing this from someone who has had it happen thrice. I have the same proc as you, PIV 2.4B, I can get to 184MHz FSB stable, 185MHz and no-boot, running 1.6v core, bah. I only get that speed because of my C1 core stepping, what stepping is yours? EDIT: Update; I have a PIV 2.4C now and I get 280MHz FSB Once again, great work d00d Last edited by TekXoID; 08-July-03 at 02:57 PM..

08-July-03, 05:53 PM		#15 (permalink)
vladimir Pimp PHP Pro	1.6 is friggin stock voltage i did sum searching and um ppl say 1.75 is high 1.7 is fine...i dont know.... edit i just rememberred i have 3 year warranty on this chip... and i got it from newegg....so even if it dies, i should be able to get get a new one...i think Last edited by vladimir; 08-July-03 at 06:00 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Register // Send in the <strike>clowns</strike> robots	Gizmo	The Register RSS	0	01-July-06 07:06 AM
The Register // Clowns attack US nuke missile silo	Gizmo	The Register RSS	0	28-June-06 05:04 PM
The Register // Patch now against virus-writing clowns	Gizmo	The Register RSS	0	12-February-05 11:57 PM
SFF Watercooling	Wordbiker	Extreme Cooling	28	10-January-04 02:17 AM
How to Watercooling	Red02	PC Apex Web News	0	29-April-03 11:53 AM

03-July-03, 10:45 PM		#3 (permalink)
vladimir Pimp PHP Pro	eh those hdd coolers dont do ****, but increase noice, and bring dust in.... eh ive got a B0 stepping....second best kinda sux, i would of lovee to have a C1 stepping chip

03-July-03, 10:50 PM		#4 (permalink)
TekXoID Banned	Nope, my HDD's ran 35Ã‚Â°+ without em', both HDD's are running 29Ã‚Â° right now, with em' Ah B0 is your limitation bro, you are lucky to even get near 180MHz

03-July-03, 11:04 PM		#5 (permalink)
vladimir Pimp PHP Pro	ah, well im happy that ive hit 3gh im thinkin of getting anotehr system soon.....amd system so ya LOL

04-July-03, 05:57 AM		#6 (permalink)
putwig Dr. Hydro Pimp	Very nice compact install! What happened to the air trap?

04-July-03, 08:16 AM		#7 (permalink)
vladimir Pimp PHP Pro	well um, it had to go.....i couldnt place it after the pump, so i ended up removig it all together... i have filled it so much, that i cannot see any movement of water in the tubes.... the only way i can tell that its working is hear the pump, and the little dirt thingie thats inside my waterblock LOL

04-July-03, 07:50 PM		#8 (permalink)
ZENNZZO Direct Cool Hoe	Can you still use the side cover with the radiator mounted there?

06-July-03, 12:09 PM		#9 (permalink)
vladimir Pimp PHP Pro	kinda....lol i have to cut up the side a tad

08-July-03, 11:24 AM		#10 (permalink)
Lord_nikon Apex Tech Fanatic Supreme	I cant acces your pics

08-July-03, 02:11 PM		#11 (permalink)
Rewind Apex Techie I	yeah clown i can't see your photos and i would love to see them dude

08-July-03, 03:48 PM		#12 (permalink)
vladimir Pimp PHP Pro	sorry, server ip changed see pics here http://67.84.163.202:808/accounts/cl...ter_installed/ and

08-July-03, 04:30 PM		#13 (permalink)
putwig Dr. Hydro Pimp	That is awfully high voltage for a northwood is it not?

08-July-03, 06:23 PM		#17 (permalink)
neotheducky Rubber Duck-Hoe	The three year warranty will most likely be voided if you use it outside of the guidelines set in the warranty. Almost every manufacturer only covers breakdowns from normal surcumstances. This means that it will not cover failures due to overclocking. I stand with TekXoid (just this once ) in saying that you would be pushing it to up the voltage. And for what really? A few more points in 3dMark? I just dont think its worth losing a 150 dollar processor.

08-July-03, 06:59 PM		#18 (permalink)
vladimir Pimp PHP Pro	how would they know if i was ocin or it died by itself? and gues wut SNDS happens from high fsb too...

08-July-03, 07:11 PM		#19 (permalink)
TekXoID Banned	Not so Clown, where did you read that? People dont know what causes it so they assume. High FSB does not cause SNDS

08-July-03, 07:35 PM		#20 (permalink)
vladimir Pimp PHP Pro	eh http://www.xbitlabs.com/news/cpu/display/news6375.html misread it a big