DangerDen Goodness w/Bling ...

ZENNZZO · 30-December-04, 08:28 PM

The good ol boys at DangerDen have done it again, this time with some blingage...
Check it out, they are offering Brass,
CHROME!...much blingage
and a ACETAL top that weighs in at a skinny 6oz
It will mount to the 6600 and 6800 series nVidias, Very trick
Check 'em out at the DEN

flounder405 · 30-December-04, 08:32 PM

Dang those are slick...i wounder if it would fit on my card even though its not listed,and if it did i wounder if i can return my gpu block that has not been used

ZENNZZO · 30-December-04, 08:53 PM

Quote:

Originally Posted by flounder405


	Dang those are slick...i wounder if it would fit on my card even though its not listed,and if it did i wounder if i can return my gpu block that has not been used

What card Bro?

flounder405 · 30-December-04, 09:06 PM

bfg 5900 factory oc ..the bolt pattern is pretty wide apart though ...or at least it looks it compaired to other cards.I bought a replacement fan for it and it didnt fit ,it also wouldnt fit on my epox"s 8rda+ northbridge . so its a larger pattern but dont know what the bolt spacing is on the newer cards.

ZENNZZO · 30-December-04, 09:25 PM

Quote:

Originally Posted by flounder405


	bfg 5900 factory oc ..the bolt pattern is pretty wide apart though ...or at least it looks it compaired to other cards.I bought a replacement fan for it and it didnt fit ,it also wouldnt fit on my epox"s 8rda+ northbridge . so its a larger pattern but dont know what the bolt spacing is on the newer cards.

Measured diagonally
center to center I get: 3.125" or 79mm
Anywhere near that?

Arkangyl · 30-December-04, 09:51 PM

where are you guys seeing the link? ZENN:s just goes to the DD homepage, am I missing something here?

4rm4g3dd0n · 30-December-04, 09:52 PM

holy cow that looks good

flounder405 · 30-December-04, 11:45 PM

Ark if you scroll down on DD home page its on there toward the bottom.
Zenn i measured 2 holes that are diagonal from eachother and it looks to be 79 mm ,but there are only two holes instead of four.But i dont see why it wouldnt mount just fine with just those 2 ...but i could be wrong.Man im flippin coins here on woundering if there might be a way to exchange this one i have for a nice chrome one that might fit and maybe work.

ZENNZZO · 31-December-04, 12:45 AM

Quote:

Originally Posted by flounder405


	Ark if you scroll down on DD home page its on there toward the bottom. Zenn i measured 2 holes that are diagonal from eachother and it looks to be 79 mm ,but there are only two holes instead of four.But i dont see why it wouldnt mount just fine with just those 2 ...but i could be wrong.Man im flippin coins here on woundering if there might be a way to exchange this one i have for a nice chrome one that might fit and maybe work.

Diagonally is how they mount with just two screws...

floatingtrem · 31-December-04, 02:38 AM

Damn these look good.

I may just have to grab one to put in the W/C setup i'm puting together.

Any chance i'll be able to switch out the the barbs for some right angled ones? I'm working in a tight space.

SPECIALBLEND218 · 04-January-05, 07:18 PM

Quote:

Originally Posted by flounder405


	Ark if you scroll down on DD home page its on there toward the bottom. Zenn i measured 2 holes that are diagonal from eachother and it looks to be 79 mm ,but there are only two holes instead of four.But i dont see why it wouldnt mount just fine with just those 2 ...but i could be wrong.Man im flippin coins here on woundering if there might be a way to exchange this one i have for a nice chrome one that might fit and maybe work.

The 5900 and the 6800 have the same mounting holes. The maze4 will mount fine (the revision 1 and 2). The NV-68 block utilizes the outer blocks on the 6800 and I think that where the confusion comes in, the 6800 has many holes including the orginal Nvidia holes as well.

Also those new blocks are sweet looking. I especially like how they mount with 4 screws instead of two.

j-dogg · 04-January-05, 07:24 PM

chrrooooommmmee

so shiiiiiiiinyyyy

Joose · 07-January-05, 05:11 PM

Holy hell that chrome looks sexy

30-December-04, 08:28 PM		#1 (permalink)
ZENNZZO Direct Cool Hoe	DangerDen Goodness w/Bling ... The good ol boys at DangerDen have done it again, this time with some blingage... Check it out, they are offering Brass, CHROME!...much blingage and a ACETAL top that weighs in at a skinny 6oz It will mount to the 6600 and 6800 series nVidias, Very trick Check 'em out at the DEN

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Register // Bling bling: Nokia models L'Amour collection	Gizmo	The Register RSS	0	07-April-06 01:09 PM
DangerDen ACETAL GPU goodness	ZENNZZO	Extreme Cooling	6	07-January-05 06:33 PM
Bling Bling XBOX	zanderq164	Other Modding	4	25-May-04 01:55 PM
Is "Bling Bling" Dead?	$SOLID$ Necro	Anything Goes	55	08-November-03 09:27 AM
bling bling	NapalmStixToKidz	Anything Goes	24	13-June-03 09:44 PM

30-December-04, 08:32 PM		#2 (permalink)
flounder405 The Mack Daddy	Dang those are slick...i wounder if it would fit on my card even though its not listed,and if it did i wounder if i can return my gpu block that has not been used

30-December-04, 09:06 PM		#4 (permalink)
flounder405 The Mack Daddy	bfg 5900 factory oc ..the bolt pattern is pretty wide apart though ...or at least it looks it compaired to other cards.I bought a replacement fan for it and it didnt fit ,it also wouldnt fit on my epox"s 8rda+ northbridge . so its a larger pattern but dont know what the bolt spacing is on the newer cards.

30-December-04, 09:51 PM		#6 (permalink)
Arkangyl Hoe-lier than Thou	where are you guys seeing the link? ZENN:s just goes to the DD homepage, am I missing something here?

30-December-04, 09:52 PM		#7 (permalink)
4rm4g3dd0n Apex Elite Tech	holy cow that looks good

30-December-04, 11:45 PM		#8 (permalink)
flounder405 The Mack Daddy	Ark if you scroll down on DD home page its on there toward the bottom. Zenn i measured 2 holes that are diagonal from eachother and it looks to be 79 mm ,but there are only two holes instead of four.But i dont see why it wouldnt mount just fine with just those 2 ...but i could be wrong.Man im flippin coins here on woundering if there might be a way to exchange this one i have for a nice chrome one that might fit and maybe work.

31-December-04, 02:38 AM		#10 (permalink)
floatingtrem Apex Elite Expert Tech	Damn these look good. I may just have to grab one to put in the W/C setup i'm puting together. Any chance i'll be able to switch out the the barbs for some right angled ones? I'm working in a tight space.

04-January-05, 07:24 PM		#12 (permalink)
j-dogg Mystical Schwinn Guru	chrrooooommmmee so shiiiiiiiinyyyy

07-January-05, 05:11 PM		#13 (permalink)
Joose Joosey	Holy hell that chrome looks sexy